Furopyridines. XXIX. Reactions of furo[2,3-b:4,5-c‘]-, -[3,2-b:-4,5-c’]-, -[2,3-c:4,5-c‘]- and -[3,2-c:3,2-c’]dipyridine

Furo[2,3-b:4,5-c‘]- 1a , -[3,2-b:4,5-c’]- 1b , -[2,3-c:4,5-c‘]- 1c and -[3,2-c:4,5-c’]dipyridine 1d were derived to the N-oxides 2a-d , N‘-oxides 2′b , 2′c or N,N’-dioxide 3b-d by N-oxidation with m-chloroperbenzoic acid. Chlorination of these N-oxides, N′-oxide and N,N′-dioxides with phosphorus oxychloride afforded compounds chlorinated at the α-position(s) to the ring nitrogen 4a-d , 4′c , 14b-d and 14′b . Acetoxylation of N-oxides 2a-d and 2′c with acetic anhydride gave the corresponding pyridone compounds 6a-d and 6′c in good yields, while the acetoxylation of N,N′-dioxides gave a complex mixture from which no compound could be isolated. Cyanation of 2a-d, 2′c and 3b-d with trimethylsilyl cyanide yielded the cyano compounds 7a-d , 7′c , cyano-N-oxides 15b-d and dicyano compounds 15′c and 15′d . Monocyano compounds 7a-d and 7′c were converted to the imino esters 8a-d and 8′c by treatment with sodium ethoxide. Imino esters were derived to the carboxylic esters 9a-d and 9′c , from which the corresponding alde hydes 10a-d and 10′c were obtained by reduction with diisobutylaluminum hydride. Dicyanide 15′c was converted to dialdehyde 19 by the treatment with sodium ethoxide, and the subsequent hydrolysis of the imino ester and reduction of the carboxylic ester with diisobutylaluminum hydride.     

Preparation and functions of self‐assembled monolayers of helix peptides

Self‐assembled monolayers (SAMs) of helix peptides oriented vertically to a gold surface were prepared. Negative surface potentials of a few hundred millivolts were observed for the helix peptide SAMs when they were immobilized on gold through the N terminal of the peptides. However, positive surface potentials were generated in the helix peptide SAMs when the N terminal of the peptides was directed the opposite way. The large dipole moment of the helical peptide was thought to be the major factor for generation of the surface potential. The effect of the dipole moment on the electron transfer through the helix peptide SAMs was investigated. Photocurrent generation by photoexcitation of the N‐ethylcarbazolyl group of the peptide SAMs was accelerated by the dipole moment directed toward the gold substrate. Helical peptides were thus shown to be a suitable medium for electron transfer. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4826–4831, 2000     

Electric properties of self-assembled monolayers of helical peptides by scanning tunneling spectroscopy

Helical peptides having a disulfide group at one terminal, Lipo-(Leu-Aib)₁₂-OBzl (Lipo and OBzl represent lipoic acid and benzyl ester, respectively, SSL24B), and Boc-NHCH₂CH₂NHCO-Fc-CO-Ala-(Leu-Aib)₈-lipoamide (Boc, Fc, and lipoamide represent t-butyloxycarbonyl, ferrocene, and lipoamine, respectively, FcL16SS), were synthesized, and self-assembled monolayers (SAMs) of the helical peptides were prepared on gold. When the SSL24B SAM was observed at high-bias voltage by scanning tunneling microscopy (STM) under ultrahigh vacuum, bright spots with higher conductivity appeared in the STM image. The image was restored again to a homogeneous surface with lower bias voltage, suggesting that Au–S linkage should be reversibly changed to a conductive state. The current/voltage (I-V) curve by scanning tunneling spectroscopy (STS) at the bright domains demonstrated a rectification behavior where current increases drastically at a positive bias voltage above 3.0 V. However, the I-V curve of the FcL16SS SAM showed a current increase at negative bias voltage below −1.5 V. The redox group is, thus, a determining factor for the direction of this flow. However, STS at low-bias voltage and with the tip being inserted in the peptide SAM revealed a zero-conductance region in the I-V curve. The peptide layer may act as a molecular capacitor because of a large dielectric constant of the helical peptide. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3493–3500, 2003     

Formation of gold nanoparticles in microreactor composed of helical peptide assembly in water

A novel microreactor was prepared by self-assembly of an amphiphilic block copolymer composed of a hydrophobic helical peptide unit with a naphthyl group at the C terminal and a hydrophilic poly(ethylene glycol) unit. The copolymer formed a self-assembly in water, taking a vesicular structure. Noticeably, when the copolymer was dispersed in an Au(3+) aqueous solution, gold nanoparticles were formed without addition of any reducing reagent. The naphthyl groups, which are located at the inner surface of the vesicular assembly, promoted the reduction of Au(3+) ions with accompanying pH decrease.     

Thin film coating of photocatalytics on ultra light ceramic tile by use of supercritical fluid

Abstract

Although sol-gel method is an easy procedure to form a thin film, it's extremely difficult to coat on the surface of small size particles, fibers, and fiber ceramics, because concentration occurs by capillary phenomena and causes peeling or breakage of film.

In order to solve this problem, we use supercritical CO₂ rapid expansion from supercritical solution (RESS), nano-sized particles of TiO₂ with high intensity can be sprayed out of a nozzle, then collected on the surface of substrates, but can be absorbed into fibers or porous materials, being not interfered by viscosity of a solution.

TiO₂ sol made by hydrolysis process is set in a pressure cell and mixed together with super-critical CO₂. Controlling the pressure and the temperature, we could obtain TiO₂ sol and super critical fluid mixture, and then discharge to the substrate. At this point, Titania sol viscosity is so low that a surface wettability of the substrate becomes negligible.

By the use of the characteristics of the supercritical fluid, without constraint condition of viscosity or capillarity, this sol can penetrate into the interstices of the substance's structure.

Thus, clearing obstruction of capillary phenomena, supercritical fluid coating method shows its capability to penetrate deep into inside of entangled fiber of the three-dimensional structure so as considered to be a heat resistant filter with 95% porosity.     

Effects of monolayer structures on long-range electron transfer in helical peptide monolayer

Self-assembled monolayers of alpha-helical peptides were prepared on gold, and the effects of the monolayer structures (kind of constituent amino acid, molecular orientation, and molecular packing) on long-range electron transfer through the helical peptides were studied. The helical peptides were 16mer peptides having a thiophenyl linker at the N-terminal for immobilization on gold and a redox active ferrocene moiety at the C-terminal as an electron-transfer probe. The peptides were immobilized on gold by a gold-sulfur linkage and the electron transfer from the ferrocene moiety to gold was studied by electrochemical methods. When two types of the peptides, one with the repeating unit of Leu-Aib (Aib represents 2-aminoisobutyric acid) and the other with that of Ala-Aib, were compared, the electron transfer was found one order slower in the Leu-Aib peptide monolayer than that in the Ala-Aib peptide monolayer. The self-assembled monolayers of the Ala-Aib peptide with mixing of three different lengths of the peptides, 8mer, 12mer, and 16mer without a ferrocene moiety, were also prepared. The monolayer regularity in terms of molecular orientation and packing was higher roughly in the order of the monolayers mixed with 16mer > 12mer > no additive > 8mer, but the electron transfer became faster in the opposite order. The logarithms of the standard rate constants showed a nearly linear relationship with the direct distances between the ferrocene moiety and gold (beta = 0.32 A (-1)). Some data deviated from this linear relationship, but the deviations could be explained from the difference in the molecular packing, which was evaluated from the monolayer capacitance. It is thus concluded that an electron is transferred along a few molecules along the surface normal so that the vertical orientation or the increase of the interchain backbone separation slows down the electron transfer. Further, it is demonstrated that a tightly packed monolayer, where vibrational mode is restricted, suppresses the electron transfer. Three models are proposed to account for the observed molecular dynamics effects on the basis of either electron-transfer mechanism of electron tunneling or sequential hopping.     

Asymmetric total synthesis of (-)-Linderol A

The first asymmetric total synthesis of (-)-Linderol A, a potent inhibitor of melanin biosynthesis of cultured B-16 melanoma cells, has been achieved via two key reactions: a diastereoselective [2+2] photocycloaddition of a coumarin-3-carboxylate bearing a chiral auxiliary with 3-methyl-1-butene and a subsequent stereoconvergent transformation of the photoadducts with use of dimethylsulfoxonium methylide to afford a tetrahydrodibenzofuran derivative.     

Suppression of HOMO-LUMO transition in a twist form of oligo(phenyleneethynylene) clamped by a right-handed helical peptide

A donor-π-acceptor (D-π-A) system of oligo(phenyleneethynylene) (OPE) was twisted by clamping both ends of the OPE with a right-handed helical peptide (SSA8=OPE). The induced twist in OPE was in a right-handed way. SSA8=OPE showed a weaker HOMO-LUMO band in the absorption spectrum than that of a reference compound AcOPE without the helix bridge. The fluorescence quantum yield of SSA8=OPE was extremely low (0.0045-0.0165), which was in contrast to AcOPE with a moderate quantum yield of 0.355. The fluorescence life times of SSA8=OPE and AcOPE were nearly the same. Time-dependent density functional theory calculations (b3lyp/6-31G(d,p) level) on a twisted conformation of the D-π-A system qualitatively reproduced CD spectra and UV spectra of a weak oscillator strength of the HOMO-LUMO transition. Upon twisting the D-π-A system, the oscillator strength of the HOMO-LUMO transition is thus reduced.     

Preparation of fibrous cellulose by enzymatic polymerization using cross-linked mutant endoglucanase II

A cross-linked mutant endoglucanase II was prepared for enzymatic polymerization to cellulose. The cross-linked enzyme is composed of three mutant enzymes showing polymerization activity. A characteristic feature of the polymerization with this cross-linked enzyme is formation of cellulose fibrils in contrast to plate-like crystals obtained by using a free enzyme.     

A convenient one-pot procedure for synthesis of thiol esters using magnesium ion as a catalyst

Various thiol esters (R¹ COSR²) were prepared in high yields by treatment of 1-acylimidazole with thiols in the presence of a catalytic amount of Mg(OEt)₂. Malonic half-thiol esters [R¹OCOCH(R³)COSR²] were also prepared in good yields by treating magnesium monoalkyl malonate [R¹ OCOCH(R³)COOMg$\text{1}\text{2}$] with carbonyl-1,1′-diimidazole followed by addition of thiols.