Efficient intracellular delivery of rifampicin to alveolar macrophages using rifampicin-loaded PLGA microspheres: effects of molecular weight and composition of PLGA on release of rifampicin

Monodispersed PLGA microspheres containing rifampicin (RFP) have been prepared by solvent evaporation method using a Shirasu porous glass (SPG) membrane. The microspheres were spherical and their average diameter was about 2 microm. The loading efficiency of rifampicin was dependent on the molecular weight of PLGA. The higher loading efficiency was obtained by the usage of PLGA with the lower molecular weight, which may be caused by the interaction of the amino groups of rifampicin with the terminal carboxyl groups of PLGA. PLGA with the monomer compositions of 50/50 and 75/25, of lactic acid/glycolic acid, were used in this study. From rifampicin-loaded PLGA microspheres formulated using PLGA with the molecular weight of 20,000, rifampicin was released with almost constant rate for 20 days after the lag phase was observed for the initial 7 days at pH 7.4. On the other hand, from rifampicin-loaded PLGA microspheres formulated using PLGA with the molecular weight of 5000 or 10,000, almost 90% of rifampicin-loaded in the microspheres was released in the initial 10 days. Highly effective delivery of rifampicin to alveolar macrophages was observed by the usage of rifampicin-loaded PLGA microspheres. Almost 19 times higher concentration of rifampicin was found to be incorporated in alveolar macrophages when rifampicin-loaded PLGA microspheres were added to the cell culture medium than when rifampicin solution was added.     

Photoiniferter-based thermoresponsive graft architecture with albumin covalently fixed at growing graft chain end

The aim of this study was to develop a novel surface graft architecture in which albumin is covalently fixed at the growing chain end of the hydrophilic polymers: poly(N, N-dimethylacylamide), PDMAM, and poly(N-isopropylacrylamide), PNIPAM. Photoiniferter-based surface-grafted polymers were prepared using either an albuminated iniferter or a nonalbuminated iniferter, both of which were derivatized on glass surfaces, and ultraviolet (UV)-light-irradiated in the presence of a DMAM or NIPAM monomer. Surface chemical composition analysis by X-ray photoelectron spectroscopy, contact angle measurement, immunostaining using fluorescence labeled antibody and the measurement of graft thickness, as determined from force-distance curves obtained in water at 25 degrees C and 37 degrees C by atomic force microscopy, evidenced that the thickness of graft layer increased with photoirradiation time and albumin molecules exist at growing chain ends. For PNIPAM-grafted surfaces, the interconversion between swollen and collapsed graft chains was observed below and above the lower critical solution temperature of PNIPAM. The potential application of a thermoresponsive graft with albumin covalently fixed at its growing chain end was discussed in terms of "active" nonfouling surface design based on the temperature-dependent switching of phase transition.     

Radiation-induced emulsion polymerization of ethylene. IV. Effect of pressure,temperature, and additives on rate in connection with number of polymer particles

The effects of pressure, temperature, and additives on the rate of radiation-induced emulsion polymerization of ethylene with FC-143 as emulsifier were studied kinetically. The rate of polymerization was proportional to the 2.5 power of ethylene fugacity, and the apparent rate constant (rate of polymerization/2.5 power of ethylene fugacity) was constant below 78°C. Above this temperature, the rate constant decreased with an apparent activation energy of ?8.2 kcal/mole. These facts can be interpreted in connection with the polymer structure and the change of rate of escape of radicals from the polymer structure and the change of rate of escape of radicals from the polymer particle into the aqueous phase. The rate of polymerization decreased on addition of a series of n-aliphatic alcohols due to the chain-transfer reaction and consequent escape of radicals to the aqueous phase. On the other hand, the addition of tert-butyl alcohol increased the rate of polymerization, probably because of its effect in increasing swelling of the polymer particles. Addition of electrolytes increased the rate of polymeriaztion as a result of the increase of the number of polymer particles.     

Effect of temperature on the radiation-induced polymerization of ethylene in various media

The effects of temperature on the radiation-induced polymerization of ethylene in bulk and in the presence of ethyl alcohol, n-butyl alcohol, tert-butyl alcohol, cyclohexane, 2,2,4-trimethylpentane, and 2,2,5-trimethylhexane were studied. The changes of the amounts of polymerized monomer with the reaction temperature were different from each other in these reaction systems, especially in the range lower than 60–80°C. At temperatures lower than 60–80°C, as the reaction temperature increases, the amount of polymerized monomer decreased in bulk and in the presence of tert-butyl alcohol. The amount was almost constant in the presence of ethyl alcohol and 2,2,4-trimethylpentane, and it increased in the presence of n-butyl alcohol, cyclohexane, and 2,2,5-trimethylhexane. However, in the temperature range higher than 60–80°C, the amount of polymerized monomer increased with increasing temperature in every reaction system except for bulk polymerization. The molecular weight of polymer decreased with increasing temperature in every reaction system except at temperatures lower than 25°C. The molecular weight of polymer formed in bulk, in tert-butyl alcohol, and also in 2,2,4-trimethylpentane were relatively higher than that in other reaction systems. A bimodal molecular weight distribution was observed for the polymer formed in bulk and in tert-butyl alcohol at 40–60°C. These results are discussed in connection with the heterogeneity of the reaction system. The differences due to temperature in each reaction system are explained as due to the difference in affinity of the reaction system for the propagating chain and in the facility of chain transfer to the medium.     

Field-assisted reaction of the metal-molten glass interface

The anodic oxidation and cathodic behavior of Pt have been investigated by linear potential sweep voltammetry in various molten glasses such as silicate, borate and mixed network-forming oxide systems. Furthermore, the metal-molten glass interface after polarization was analyzed by EPMA.     

Sodium borosilicate glasses prepared by the sol-gel process

A sodium borosilicate gel of composition 80SiO₂·15B₂O₃·5Na₂O (wt%) was prepared from tetraethyl orthosilicate, trimethyl borate, sodium methylate, H₂O, and HCl as the catalyst. Variation of specific surface area and porosity as a function of heating temperature indicated that closed pores were opened at temperatures lower than 400°C and collapsed above 450°C. From TG and DTA curves, about 19% Si and B atoms are evaluated to have −OH bonds. X-ray diffraction patterns indicated crystallization of low-cristobalite out of the gel when it was heated at 700°C for 5 h, showing a difference from a melt-quenched glass of the same composition.     

Synthesis and photochemical surface fixation of hydroxylated cascade molecules

A novel supramolecularly assembled surface architectural method was developed, which involved a self-assembling process of amphiphilic molecules and a subsequent photochemical process. The specially designed molecules were cascade “tree” molecules composed of a phenylazido group as root, an aliphatic hydrocarbon chain as stem, and two or three tris(hydroxymethyl)aminomethane groups as leaves. Using a horizontal lifting method, unimolecular assemblies which formed at an air/water interface were transferred to polyethylene (PE) surfaces. Upon ultraviolet irradiation, these molecules were covalently fixed on the surfaces due to the photochemical reactivity of the phenylazido group. Treated surfaces became wettable with water, indicating that hydrophilic hemispheres were located at the outer surface region of the PE surfaces. Bimolecular assemblies composed of cascade molecules and noncascade molecules with a hydroxyl group at a terminus exhibited lower advancing and receding contact angles and reduced hysteresis than those of unimolecular ones, indicating that these bimolecular assemblies have a well-structured molecular organization with a high degree of packing. © 1997 John Wiley & Sons, Inc.     

Laser-irradiation-induced surface graft polymerization method

A laser-induced surface graft polymerization method is reported in which surface radicals generated upon laser irradiation initiated radical polymerization. The radical concentrations generated upon excimer laser irradiation under vacuum on poly-(ethylene terephthalate) film surfaces were measured using a radical scavenger, 1,1-diphenyl-2-picrylhydrazyl. The density of surface radicals increased with laser fluence at low fluences but decreased at high fluences. Upon laser irradiation and subsequent treatment with gaseous N,N-dimethylacrylamide, surface graft polymerization occurred. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 747–750, 1997