Photocontrol of cell adhesion and proliferation by a photoinduced cationic polymer surface

In this study photoinduced cation generation, based on the photochemical properties of malachite green (MG), was used for the surface design and in vitro photochemical control of cell adhesion and proliferation. The MG-derivatized surface was prepared by coating a photoreactive polymer as a substrate onto a poly(ethylene terephthalate) (PET) sheet. The photoreactive polymer was radical copolymer of styrene with the MG-derivatized monomer diphenyl(4-vinylphenyl)methane leucohydroxide (degree of substitution of MG unit: 12.4 mol%). Water contact angle measurements and X-ray photoelectron spectroscopy revealed high hydrophobicity and homogeneous distribution of the MG groups on the outermost surface of the coated film, respectively. When the coated film was exposed to ultraviolet light (UV) irradiation at wavelengths of 290-410 nm, a time-dependent color change of the film was observed from pale yellow, before irradiation, to green. These results indicated generation of cations on the film surface by photochemical cation generation of the MG groups, which was quantitatively characterized by force versus distance curves measurements in atomic force microscopic (AFM) observation using a carboxylated AFM tip. The seeding and culture of endothelial cells showed a marked reduction in adhesion on the nonirradiated coated film surface, whereas the UV-irradiated surface promoted cell adhesion and proliferation except for incubation in serum-free medium, which was similar to commercial tissue culture PET sheet. These observations may be due to adsorption of cell adhesive proteins, typified by fibronectin, in serum-containing medium onto the cationized photoreactive copolymer surface by electrostatic interactions.     

Atrazine transformation using synthetic enzymes prepared by molecular imprinting

Atrazine imprinted synthetic polymers were prepared using a combination of methacrylic acid and 2-sulfoethyl methacrylate that bound and converted atrazine and other 6-chlorotriazine herbicides to less toxic compounds. A chloride at the 6-position of the triazines was converted to a methoxy group by the polymer in a methanol-containing solvent, where the imprinting effects enhanced the catalytic activity. Competitive inhibition of the atrazine methanolysis was observed in the presence of a structurally related binder, ametryn, suggesting that the catalytic reaction proceeded in the binding sites generated by the molecular imprinting process.     

Polymerization of trimethylene carbonate in aqueous solutions: Reaction mechanism and characterization

Polymerization of a trimethylene carbonate (TMC) in an aqueous solution was investigated by gel permeation chromatography, Fourier transform infrared spectroscopy, and nuclear magnetic resonance. The polymerization reaction proceeded rapidly in the aqueous solution and high conversion was achieved in a relatively short time. 1,3‐Propanediol (PPD) formed by hydrolysis of TMC was used as the initiator. The TMC oligomer obtained by ring‐opening polymerization had a TMC unit backbone with terminal 3‐hydroxypropyl groups at both chain ends. The oligomer underwent transesterification reaction with elimination of PPD, resulting in a gradual increase in the molecular weight of the product. The molecular weight was affected by the concentration of TMC. The thermal properties of the polymers were investigated by differential scanning calorimetry. Polymers within the molecular weight (M_n) range from 6.0 × 10³ to 2.3 × 10⁴ g/mol crystallized, and endothermic peaks corresponding to the melting temperature were observed. The glass transition temperature increased with the molecular weight of the polymers. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1485–1492, 2010     

Growth of superconducting FeSe0.5Te0.5 thin films by pulsed-laser deposition

FeSe_0.5Te_0.5 thin films with PbO-type structure are successfully grown on MgO(1 0 0) and LaSrAlO₄(0 0 1) substrates from FeSe_0.5Te_0.5 or FeSe_0.5Te_0.75 polycrystalline targets by pulsed-laser deposition. The film deposited on the MgO substrate (film thickness ∼ 55 nm) shows superconductivity at 10.6 K (onset) and 9.2 K (zero resistivity). On the other hand, the film deposited on the LaSrAlO₄ substrate (film thickness ∼ 250 nm) exhibits superconductivity at 5.4 K (onset) and 2.7 K (zero resistivity). This suggests the strong influence of substrate materials and/or the c-axis length to superconducting properties of FeSe_0.5Te_0.5 thin films.     

A hierarchical clustering scheme approach to assessment of IP-network traffic using detrended fluctuation analysis

This paper presents an approach to the assessment of IP-network traffic in terms of the time variation of self-similarity. To get a comprehensive view in analyzing the degree of long-range dependence (LRD) of IP-network traffic, we use a hierarchical clustering scheme, which provides a way to classify high-dimensional data with a tree-like structure. Also, in the LRD-based analysis, we employ detrended fluctuation analysis (DFA), which is applicable to the analysis of long-range power-law correlations or LRD in non-stationary time-series signals. Based on sequential measurements of IP-network traffic at two locations, this paper derives corresponding values for the LRD-related parameter α that reflects the degree of LRD of measured data. In performing the hierarchical clustering scheme, we use three parameters: the α value, average throughput, and the proportion of network traffic that exceeds 80% of network bandwidth for each measured data set. We visually confirm that the traffic data can be classified in accordance with the network traffic properties, resulting in that the combined depiction of the LRD and other factors can give us an effective assessment of network conditions at different times.     

Synthesis of D- and L-selenomethionine double-labeled with deuterium and selenium-82

The synthesis of D- and L-selenomethionine labeled with ?2Se and three deuteriums at Se-methyl group (D- and L-[2H?, ?2Se]selenomethionine) was described. D- And L-[2H?, ?2Se]selenomethionine were prepared by condensation of (R)- and (S)-2-amino-4-bromobutylic acid with lithium [2H?, ?2Se]methaneselenolate, which was prepared from metal (82)Se and [2H?]methyl iodide. The optical purities of D- and L-[2H?, ?2Se]selenomethionine were determined by HPLC with a chiral stationary phase column and were found more than 99% ee. The chemical ionization mass spectra showed that the molecular related ion for N-isobutyloxycarbonyl ethyl ester derivatives of [2H?, ?2Se]selenomethionine did not overlap with the m/z values known from that of non-labeled selenomethionine.     

Thermal behavior of ground mixtures of heptakis (2,6-di-O-methyl)-β-cyclodextrin and benzoic acid

Characterization of an inclusion complex prepared from amorphous ground mixtures of heptakis (2,6-di-O-methyl)--cyclodextrin (DMCD) and benzoic acid was carried out by a sealed heating method. The formation of the crystalline inclusion complex and the variation in physicochemical properties of the ground mixture were investigated as a function of heating temperature. On the basis of X-ray diffractometry and Fourier transform infrared spectroscopy, the crystallization of the ground mixture was confirmed to take place at about 135°C. The crystallization temperature was shifted to lower temperatures and the bound molar ratio of benzoic acid to DMCD increased as the mixing molar ratio of benzoic acid to DMCD was raised.Tsumura & Co., 3586 Yoshiwara, Amimachi, Inashikigun, Ibaraki 300-11, Japan.     

Radiation-induced homogeneous polymerization of ethylene in cyclohexane

The radiation-induced polymerization of ethylene in cyclohexane was carried out in a reactor of 100 ml capacity under a range of temperature of 25–150°C, dose rate of 4.1 × 10⁴–2.9 × 10⁵ rad/hr, pressure of 200 kg/cm², and amount of cyclohexane of 20–90 ml. The polymerization was found to proceed at a steady state from the beginning. The polymerization rate is maximum at ca. 50 ml of cyclohexane. The dose rate exponent of the polymerization rate was 0.6 at every temperature from 25 to 150°C. The polymer molecular weight is in the range of 10³–10⁴, independent of dose rate, and decreases with increasing amount of cyclohexane. The molecular weight distribution is unimodal and narrow. Kinetic analysis of these results indicates that the polymerization proceeds via a simple scheme of homogeneous polymerization and the polymer molecular weight was determined by the chain transfer reaction which takes place mostly with cyclohexane. The unimodal and narrow molecular weight distribution is also consistent with the homogeneous polymerization scheme.