Preparation and characteristics of photocrosslinkable hydrophilic polymer having cinnamate moiety

The reaction of copolymer of N,N-dimethylacrylamide (DMAA) and bromoethyl methacrylate with potassium cinnamate produced water-soluble photosensitive polymers. Photosensitive polyDMAA films were irradiated with a 400 W high-pressure mercury lamp (λ > 280 nm) to produce crosslinked polymers, which were swollen in water. The degree of swelling was controlled by the irradiation time and content of cinnamate moieties in copolymers. Higher cinnamoylation and longer irradiation time resulted in higher yield of crosslinked polymers and less swellability. Partial degelation upon irradiation at λ ～ 254 nm was observed. The advantage of gelation via photodimerization over conventional chemical crosslinking methods is discussed in conjunction with biomedical applications. © 1992 John Wiley & Sons, Inc.     

Enantioselective fluorination mediated by N-fluoroammonium salts of cinchona alkaloids: first enantioselective synthesis of BMS-204352 (MaxiPost)

We have employed a cinchona alkaloid/Selectfluor-mediated enantioselective fluorination of the oxindole 2 to achieve the first enantioslective synthesis of BMS-204352 (MaxiPost, S-1), an effective opener of maxi-K channels. Fluorination occurred to produce S-1 with 84% ee using the bis-cinchona alkaloid (DHQ)(2)AQN. Recrystallization produced enantiomerically pure (>99% ee) product. Quinidine-mediated fluorination of 2 gave the (R)-antipode of 1 with 68% ee.     

Effect of amount of monomer on radiation-induced polymerization of styrene adsorbed on silica gel

The effect of amount of monomer on radiation-induced polymerization of styrene adsorbed on silica gel was investigated with the monomer amounting from less than monolayer adsorption to more than the equilibrium adsorption. The rate of graft polymerization and the molecular weight of the polymer changed with the amount of monomer adsorbed on silica gel. Maximum grafting efficiency was obtained at monolayer adsorption. The molecular weight of graft polymer was higher than that of homopolymer in both radical and cationic polymerizations, and the ratio in molecular weight of graft polymer to that of homopolymer tends to be unity with increasing amount of adsorbed monomer. These results can mainly be explained in terms of the number of initiating species (radical and cation) that change in relation to the amount of adsorbed monomer. Propagation and termination change with amount of adsorbed monomer in relation to the molecular mobility of adsorbed monomer. A very high-molecular-weight graft polymer is formed only with a small amount of adsorbed monomer in the initial stage. The grafting percent with a large amount of adsorbed monomer increased after most of the monomer has been polymerized. Secondary effect of radiation on the graft and homopolymers due to energy transfer from silica gel is suggested from the complicated phenomena in the later stage of the reaction.     

Effects of beta-sheet breaker peptide polymers on scrapie-infected mouse neuroblastoma cells and their affinities to prion protein fragment PrP(81-145)

The effects of Soto's 'beta-sheet breaker peptide' and its polymer on PrPSc formation in ScN2a cells were investigated. Surface plasmon resonance study indicated that direct binding between PrP(81-145) and the 'beta-sheet breaker peptide' is not specific and may not play a major role in the inhibition of PrPSc formation.     

Novel Copolymers of 2-Phenyl-1,1-dicyanoethylene with 4-Fluoro- and Pentafluorostyrene

Copolymerization of 2-phenyl-1,1-dicyanoethylene (PDE) with 4-fluorostyrene and pentafluorostyrene in solution with radical initiation (ABCN) at 70°C yielded random copolymers with PDE alternating units. The composition of the copolymers was calculated from nitrogen analysis and the structure was analyzed by IR, ¹H and ¹³C-NMR. The order of relative reactivity (1/r₁) and the tendency toward alternation of monomer units in the copolymer for these two monomers, is 4-fluorostyrene (1.96) > pentafluorostyrene (0.51). Higher glass transition temperature of the copolymers in comparison with that of homopolymers indicates a decrease in chain mobility of the copolymer due to the high dipolar character of the trisubstituted ethylene monomer unit.     

Novel Copolymers of 4-Fluorostyrene. 9. Some Ring-Disubstituted 2-Phenyl-1,1-dicyanoethylenes

Novel copolymers of trisubstituted ethylene monomers, ring-disubstituted 2-phenyl-1,1-dicyanoethylenes, RC₆H₃CH=C(CN)₂ (where R = 3-Br-4-CH₃O, 5-Br-2-CH₃O, 2-F-5-CH₃, 2-F-6-CH₃, 3-F-2-CH₃, 3-F-4-CH₃, 4-F-2-CH₃, 4-F-3-CH₃) and 4-fluorostyrene were prepared at equimolar monomer feed composition by solution copolymerization in the presence of a radical initiator (ABCN) at 70°C. The composition of the copolymers was calculated from nitrogen analysis, and the structures were analyzed by IR, ¹H and ¹³C-NMR. The order of relative reactivity (1/r ₁) for the monomers is 3-F-4-CH₃(1.64) > 5-Br-2-CH₃O (1.62) > 3-Br-4-CH₃O (1.36) > 4-F-2-CH₃(1.3) > 4-F-3-CH₃(1.26) > 3-F-2-CH₃(1.11) > 2-F-5-CH₃ (0.98) > 2-F-6-CH₃ (0.97). High T_g of the copolymers, in comparison with that of poly(4-fluorostyrene) indicates a substantial decrease in chain mobility of the copolymer due to the high dipolar character of the trisubstituted ethylene monomer unit. Decomposition of the copolymers in nitrogen occurred in two steps, first in the 290–400°C range with residue, which then decomposed in 400–800°C range.     

Radiation-Induced Polymerization and Pressure-Volume Behavior of Acrylonitrile at High Pressure

Radiation-induced polymerization and pressure-volume (P-V) measurements of acrylonitrile (AN) were studied up to 8000 kg/cm² in the temperature range of 6–72°C. P-V isotherms of AN have several small breaks, A phase diagram of AN was obtained from the breaking pressures and temperatures. Liquid phases were named L_I, L_II, and L_III, from low to high pressure. The polymerization behavior and volume contraction on polymerization changed in L_I, L_II, and L_III. The difference in entropy between original and activated states decreased with increasing pressure at the same phase, but increased with phase change in L_I to L_II and L_II to L_III. It was concluded from these results and from IR data on PAN that molecular packing of AN in liquid changed in L_I, L_II, and L_III. In L_II and L_III, AN molecules aligned in a less suitable geometry for polymerization than in L_I.     

Novel Copolymers of 4-Fluorostyrene. 1. Alkyl Ring-Substituted 2-Phenyl-1,1-dicyanoethylenes

Novel copolymers of trisubstituted ethylene monomers, alkyl ring-substituted 2-phenyl-1,1-dicyanoethylenes, RC₆H₄CH = C(CN)₂ (where R is 2-methyl, 3-methyl, 4-methyl, 4-ethyl, 4-i-propyl, 4-butyl, 4-i-butyl, and 4-t-butyl) and 4-fluorostyrene were prepared at equimolar monomer feed composition by solution copolymerization in the presence of a radical initiator (ABCN) at 70°C. The composition of the copolymers was calculated from nitrogen analysis, and the structures were analyzed by IR, ¹H and ¹³C-NMR. The order of relative reactivity (1/r ₁) for the monomers is 4-ethyl (42.6) > 4-butyl (29.4) > 4-t-butyl (26.7) > 4-i-butyl (1.6) > 4-i-propyl (1.29) > 3-methyl (1.26) > 2-methyl (0.8) > 4-methyl (0.4). High T _g of the copolymers, in comparison with that of poly(4-fluorostyrene) indicates a substantial decrease in chain mobility of the copolymer due to the high dipolar character of the trisubstituted ethylene monomer unit. Decomposition of the copolymers in nitrogen occurred in two steps, first in 183–500°C range with residue (5–30% wt.), which then decomposed in the 500–800°C range.     

Novel Copolymers of 4-Fluorostyrene. 3. Some Ring-Substituted 2-Phenyl-1,1-dicyanoethylenes

Novel copolymers of trisubstituted ethylene monomers, ring-substituted 2-phenyl-1,1-dicyanoethylenes, RC₆H₄CH=C(CN)₂ (where R is 4-dimethylamino, 4-diethylamino, 3-phenoxy, 3-benzyloxy, 4-benzyloxy, 4-acetoxy, 2-cyano, 3-cyano, and 4-cyano) and 4-fluorostyrene were prepared at equimolar monomer feed composition by solution copolymerization in the presence of a radical initiator (ABCN) at 70°C. The composition of the copolymers was calculated from nitrogen analysis, and the structures were analyzed by IR, ¹H and ¹³C-NMR. The order of relative reactivity (1/r ₁) for the monomers is 3-benzyloxy (2.9) > 4-cyano (2.7) > 3-phenoxy (1.9) > 4-acetoxy (1.8) > 3-cyano (1.7) > 2-cyano (1.6) > 4-benzyloxy (0.6) > 4-dimethylamino (0.4) = 4-diethylamino (0.4). High T _g of the copolymers, in comparison with that of poly (4-fluorostyrene) indicates a substantial decrease in chain mobility of the copolymer due to the high dipolar character of the trisubstituted ethylene monomer unit. Decomposition of the copolymers in nitrogen occurred in two steps, first in the 290–400°C range with residue, which then decomposition in 400–800°C range.     

Selective hydrogen peroxide oxidation of sulfides to sulfoxides or sulfones with MWW-type titanosilicate zeolite catalyst under organic solvent-free conditions

Selective oxidation of sulfides to sulfoxides and sulfones with hydrogen peroxide under organic solvent-free conditions was demonstrated by the MWW-type titanosilicate zeolite catalyst. Sulfides were oxidized smoothly to give sulfoxides with good selectivities at ambient temperature using 1.0–1.2 equiv of hydrogen peroxide with the MWW-type titanosilicate zeolite catalyst. Especially, the Ti-MWW with an interlayer-expanded structure (Ti-IEZ-MWW) catalyst showed high activity with good chemoselectivity for the oxidation of various sulfides. The catalyst is recyclable for at least five cycles, and the only byproduct is water. Sulfides were directly oxidized to give sulfones in high yields by 2.5 equiv of hydrogen peroxide with the MWW-type titanosilicate zeolite catalyst under organic solvent-free conditions.