Synthesis of nano-polycrystalline diamond from glassy carbon at pressures up to 25 GPa

ABSTRACT

Nano-polycrystalline diamond (NPD) with various grain sizes has been synthesized from glassy carbon at pressures 15–25?GPa and temperatures 1700–2300°C using multianvil apparatus. The minimum temperature for the synthesis of pure NPD, below which a small amount of compressed graphite was formed, significantly increased with pressure from ～1700°C at 15?GPa to ～1900°C at 25?GPa. The NPD having grain sizes less than ～50?nm was synthesized at temperatures below ～2000°C at 15?GPa and ～2300°C at 25?GPa, above which significant grain growth was observed. The grain size of NPD decreases with increasing pressure and decreasing temperature, and the pure NPD with grain sizes less than 10?nm is obtained in a limited temperature range around 1800–2000°C, depending on pressure. The pure NPD from glassy carbon is highly transparent and exhibits a granular nano-texture, whose grain size is tunable by selecting adequate pressure and temperature conditions.     

Surface structures of equimolar mixtures of imidazolium-based ionic liquids using high-resolution Rutherford backscattering spectroscopy

Surface structures of equimolar mixtures of imidazolium-based ionic liquids (ILs) having a common cation (1-butyl-3-methylimidazolium ([C₄MIM]) or 1-hexyl-3-methylimidazolium ([C₆MIM])) and different anions (bis(trifluoromethanesulfonyl)imide ([TFSI]), hexafluorophosphate ([PF₆]) or chlorine) are studied using high-resolution Rutherford backscattering spectroscopy (HRBS). Both cations and anions have the same preferential orientations at the surface as in the pure ILs. In the mixture, the larger anion is located shallower than the smaller anion. The [TFSI] anion is slightly enriched at the surface relative to [PF₆] with coverage of ~ 60% for the equimolar mixtures of [C₄₍₆₎MIM] [TFSI] and [C₄₍₆₎MIM] [PF₆]. No surface segregation is observed for [C₆MIM] [TFSI]_0.5[Cl]_0.5 and [C₆MIM] [PF₆]_0.5[Cl]_0.5. These results are different from the recent TOF-SIMS measurement where very strong surface segregation of [TFSI] was concluded for the mixture of [C₄MIM] [TFSI] and [C₄MIM] [PF₆].     

Influence of Cu electroplating solutions on boron carbon nitride (BCN) film

Cu electroplating is required for the fabrication of Cu/low-k interconnections. The permeation of a plating solution into low-k films during Cu electroplating is a serious challenge for 45-nm nodes and more complex devices. We investigated the influence of Cu electroplating solutions on boron carbon nitride (BCN) as a low-k film. After dipping it into a Cu electroplating solution that contained additives, the BCN film's hydrophilic surface changed to a hydrophobic surface, and the incorporation of water into the BCN film was suppressed by surfactant adsorption. Sulfuric residue was detected on the BCN sample by thermal desorption spectroscopy after treatment in the Cu electroplating solution with additives; however, it was found through electrical measurements that this solution did not affect the leakage current or the dielectric constant of the BCN film. We successfully fabricated an electroplating Cu layer on a BCN film with good adhesion, and we believe that this BCN film is a sufficiently useful material for Cu/BCN integration in LSI.     

Pressure generation to 50 GPa in Kawai-type multianvil apparatus using newly developed tungsten carbide anvils

A pressure generation test for Kawai-type multianvil apparatus (KMA) has been made using second-stage anvils of a newly developed ultra-hard tungsten carbide composite. Superb performance of the new anvil with significantly less plastic deformation was confirmed as compared to those commonly used for the KMA experiments. A maximum pressure of ～48?GPa was achieved using the new anvils with a truncation edge length (TEL) of 1.5?mm, based on in situ X-ray diffraction measurements. Further optimization of materials and sizes of the pressure medium/gasket should lead to pressures even higher than 50?GPa in KMA using this novel tungsten carbide composite, which may also be used for expansion of the pressure ranges in other types of high pressure apparatus operated in large volume press.     

Multiphoton double ionization of Ar in intense extreme ultraviolet laser fields studied by shot-by-shot photoelectron spectroscopy

Photoelectron spectroscopy has been performed to study the multiphoton double ionization of Ar in an intense extreme ultraviolet laser field (hν ～ 21 eV, ～ 5 TW/cm2), by using a free electron laser (FEL). Three distinct peaks identified in the observed photoelectron spectra clearly show that the double ionization proceeds sequentially via the formation of Ar(+): Ar+hν→Ar (+) + e? and Ar2(+) + 2hν→Ar(+) + e?. Shot-by-shot recording of the photoelectron spectra allows simultaneous monitoring of FEL spectrum and the multiphoton process for each FEL pulse, revealing that the two-photon ionization from Ar(+) is significantly enhanced by intermediate resonances in Ar(+).     

Determination of the structure of {31}ne by a fully microscopic framework

We perform the first quantitative analysis of the reaction cross sections of {28-32}Ne by {12}C at 240 MeV/nucleon, using the double-folding model with the Melbourne g matrix and the deformed projectile density calculated by antisymmetrized molecular dynamics. To describe the tail of the last neutron of {31}Ne, we adopt the resonating group method combined with antisymmetrized molecular dynamics. The theoretical prediction excellently reproduces the measured cross sections of {28-32}Ne with no adjustable parameters. The ground state properties of {31}Ne, i.e., strong deformation and a halo structure with spin parity 3/2{-}, are clarified.     

Crystallization and polymorphic transition behavior of chloramphenicol palmitate in 2-hydroxypropyl-β-cyclodextrin matrix

Chloramphenicol palmitate (CPP) was converted to an amorphous complex when spray-dried with 2-hydroxypropyl--cyclodextrin (HP--CyD), and no crystallization of CPP was observed for at least 2 months under the storage condition of 50°C and 50% relative humidity. The dissolution rate of CPP/HP--CyD complex in aqueous HCO-60 solution was much faster than CPP polymorphs (complex > metastable forms (B and subB) > stable form (A)), which was reflected in thein-vivo absorption behavior of CPP following oral administration in dogs.     

New synthetic routes to optically active alpha-quaternary alpha-aryl amino acid derivatives via the diastereoselective Stevens and Sommelet-Hauser rearrangements

The Stevens rearrangement of N-allylic alpha-aryl amino acid-derived ammonium salts and the Sommelet-Hauser rearrangement of N-benzylic alpha-alkyl amino acid-derived ammonium salts are shown to proceed with remarkably high levels of diastereoselectivity. The methods presented in this work provide new routes to optically active alpha-quaternary alpha-aryl amino acid derivatives.