Self-assembled coordination cage derived from small-sized pyridinophane

The dithia[3.3]pyridinophane consisting of two pyridine rings has been found out to assume the syn-structure by the X-ray crystallography, meaning the two nitrogen atoms point in the same direction. From this cyclophane and cis-protected palladium(II), the self-assembled coordination molecular cage has been constructed.     

Pyrolysis—gas chromatographic determination of run numbers in methyl methacrylate--styrene copolymers using the boundary effect

By considering the effect of neighbouring monomer units in depropagating polymer chain radicals on the formation of degradation products, a new boundary effect theory was developed in order to elucidate the sequence distributions in vinyl-type copolymers using the corresponding monomer yields. This theory was applied succesfully to the calculation of the sequence distributions in methyl methacrylate—styrene copolymers in terms of the run numbers. The significance of newly introduced parameters (monomer formation probability constants) is also discussed.     

Edge-Functionalized Nanographenes

Nanographenes (NGs) have recently emerged as new carbon materials. Their nanoscale size results in a size-dependent quantum confinement effect, opening the band gap by a few eV. This energy gap allows NGs to be applied as optical materials. This property has attracted researchers across multiple scientific fields. The photophysical properties of NGs can be manipulated by introducing organic groups onto their basal planes and/or into their edges. In addition, the integration of organic functional groups into NGs results in NG-based hybrid materials. These features make the post-synthetic modification of NGs an active research area. As obtainable information on chemically functionalized NGs is limited owing to their nonstoichiometry and structural uncertainty, their structural characterization requires a combination of multiple spectroscopic methods. Therefore, information on the characterization procedures of recently published chemically functionalized NGs is of value for advancing the field of NG-based hybrid materials. The present review focuses on the structural characterization of chemically functionalized NGs. It is hoped that this review will help to advance this field.     

Spectroscopic and excited-state properties of Tri-9-anthrylborane III: crystal and spectroscopic polymorphisms

We found that tri-9-anthrylborane (TAB) recrystallized from benzene produced both red cubic-like (R-form) and orange hexagon-like crystals (O-form). In both crystal forms, six TAB molecules are arranged in a honeycomb structure in the ab plane and benzene molecules are incorporated in the honeycomb structure, whose spatial geometry and the total number of benzene rings in the unit cell are different between the two forms: polymorphs with a different benzene content. In the R-form crystal, furthermore, interlayer stacking between left- and right-handed helical TAB molecules was observed in the ac plane, while each layer composed of stacked TAB molecules along the c axis was separated by benzene molecules in the O-form crystal, giving rise to more dense packing of TAB in the R-form crystal as compared to that in the O-form. Reflecting the crystal structures of the two forms, the charge transfer (CT) absorption and fluorescence spectra of the R-form crystal were shifted to the longer wavelength as compared to those in the O-form (i.e., crystal and spectroscopic polymorphisms) and, therefore, electronic interactions between TAB were stronger in the R-form as compared to those in the O-form. Furthermore, in addition to the main absorption (lambdamaxa= 499 nm) and fluorescence peaks (lambdamaxf = 570 nm), distinct absorption (lambdaa = approximately 470 nm) and fluorescence bands (lambdaf = approximately 600 nm) were observed for the R-form crystal, while the relevant absorption band in the O-form crystal (lambdaa = approximately 460 nm) or in solution (lambda(a) = approximately 435 nm) was ambiguous. The results were discussed in terms of participation of the higher energy second CT transition in TAB.     

Porous Biodegradable Polyesters, 3. Preparation of Porous Poly(ε‐caprolactone) Films from Blends by Selective Enzymatic Removal of Poly(L‐lactide)

Porous poly(ε‐caprolactone) (PCL) films were prepared by the removal of poly(L ‐lactide) (PLLA) from phase‐separated PLLA/PCL blend films using the selective Proteinase K™‐catalyzed hydrolysis of PLLA and subsequent elution of its water‐soluble oligomers and monomer into the surrounding hydrolysis media. Polarimetry, gravimetry, and differential scanning calorimetry (DSC) confirmed the complete removal of PLLA molecules from the blend films within 5 d of the Proteinase K‐catalyzed hydrolysis and therefore the formation of porous PCL films when the initial PLLA content [X_PLLA(0)(w/w) = PLLA/(PCL + PLLA)] of the blend films was in the range 0.3–0.5. The fragmentation of the blend film with X_PLLA(0) = 0.7 occurred when the Proteinase K‐catalyzed hydrolysis was continued for longer than 5 d. These findings exhibited that both the PLLA‐rich and PCL‐rich phases were continuous in the blend films for X_PLLA(0) ranges of 0.3–0.7 and of 0.3–0.5, respectively, and that the PCL‐rich phase became dispersed when X_PLLA(0) was increased to 0.7. The dependence of enzymatic hydrolysis rate on X_PLLA(0) strongly suggests that the Proteinase K‐catalyzed hydrolysis of the blend films occurs at the interfaces of PLLA‐rich and PCL‐rich phases as well as at the film surfaces.     

Synthesis of quinoline derivatives using ketene dithioacetals

Methyl 3-(N-arylamino)-2-cyano-3-methylthioacrylates 3a-h , which are readily prepared by the reaction of the ketene dithioacetal, methyl 2-cyano-3,3-bis(methylthio)acrylate ( 1 ) with arylamines, was heated at reflux in diphenyl ether to give the corresponding 2-methylthio-4-hydroxyquinoline-3-carbonitriles 4a-h in 14–77% yields. The reaction of 1 with excess aryl amines in diphenyl ether at reflux gave also the corresponding 2-arylamino-4-hydroxyquinoline-3-carbonitriles 6a-d . The 2-methylthioquinoline-3-carbonitriles 4a-h , thus obtained, are useful intermediates for the synthesis of various quinoline derivatives.     

Density functional study on geometrical features and electronic structures of di-mu-oxo-bridged [Mn2O2(H2O)8]q+ with Mn(II), Mn(III), and Mn(IV)

We report the geometrical features and electronic structures of di-mu-oxo-bridged Mn-Mn binuclear complexes with H2O ligands [Mn2O2(H2O)8]q+ in the iso- and mixed-valence oxidation states. All of the combinations among Mn(II), Mn(III), and Mn(IV) ions are considered the oxidation states of the Mn-Mn center, and the changes in molecular structure induced by the different electron configurations of Mn-based orbitals are investigated in relation to the oxygen-evolving complex (OEC) of photosystem II. The stable geometries of complexes are determined by using the hybrid-type density functional theory for both of the highest- and lowest-spin couplings between Mn sites, and the lowest-spin-coupled states are energetically more favorable than the highest-spin-coupled states except in the case of the complexes with the Mn(II) ion. The coordination positions of H2O ligands at the Mn(II) site tend to shift from the octahedral positions in contrast to those at the Mn(III) and Mn(IV) sites. The shape of the Mn2O2 core and the distances between the Mn ions and the H2O ligands vary depending on the electron occupations of the octahedral eg orbitals on the Mn site with an antibonding nature for the Mn-ligand interactions, indicating the trend as Mn(II)-O > Mn(III)-O and Mn(IV)-O, O-Mn(II)-O > O-Mn(III)-O > O-Mn(IV)-O among the iso-valence Mn2O2 cores, and O-Mn(lower)-O < O-Mn(higher)-O within the mixed-valence Mn2O2 core, and as Mn(II)-OH2 and Mn(III)-OH2 > Mn(IV)-OH2 for the axial H2O ligand. The optimized geometries of model complexes are compared with the X-ray structure of the OEC, and it is suggested that the cubane-like Mn cluster of the active site may not contain a Mn(II) ion. The effective exchange integrals are estimated by applying the approximate spin projection to clarify the magnetic coupling between Mn sites, and the superexchange pathways through the di-mu-oxo bridge are examined on the basis of the singly occupied magnetic orbitals derived from the singlet-coupled natural orbitals in the broken-symmetry state. The comparisons of the calculated results between [Mn2O2(H2O)8]q+ in this study and [Mn2O2(NH3)8]q+ reported by McGrady et al. suggest that the symmetric pathways are dominant to the exchange coupling constant, and the crossed pathway would be less important for the former than it would for the latter in the Mn(III)-Mn(III), Mn(IV)-Mn(IV), and Mn(III)-Mn(IV) oxidation states.     

Adsorption of biopolyester depolymerase on silicon wafer and poly[(R)-3-hydroxybutyric acid] single crystal revealed by real-time AFM

The adsorption behavior of PHB depolymerase from R. pickettii T1 on a silicon wafer and on P(3HB) single crystals has been studied by real-time and AFM in air and a buffer solution. First, the morphology of PHB depolymerase adsorbed on a silicon wafer was characterized to show that one molecule of PHB depolymerase has dimensions of 2.2 +/- 0.7 nm height and 16 +/- 5 nm width. The observation of PHB depolymerase adsorbed on a P(3HB) single crystal indicated that the dimensions of enzyme on the crystalline surface in air were 1.2 +/- 0.5 nm high and 28 +/- 7 nm wide, while enzyme molecules with dimensions of 2.1 +/- 0.6 nm height and 16 +/- 7 nm width were detected in a buffer solution. Comparison of the dimensions of PHB depolymerase in air with those in a buffer solution showed that the enzyme was squashed in air, but not in a buffer solution. In addition, the influence of enzymatic adsorption on the molecular state of the P(3HB) crystalline surface was investigated. The AFM images of P(3HB) single crystals after enzymatic adsorption and washing with ethanol indicated that the adhesion of PHB depolymerase changed the molecular state and generated holes on the crystalline surface.     

Characterization of biosynthesized P(3HB-co-3HA)s swellable in organic solvents

Polyhydroxyalkanoate (PHA) copolymers consisting of (R)-3-hydroxybutyrate (3HB) and medium-chain-length (R)-3-hydroxyalkanoate (3HA), P(3HB-co-3HA), are usually solved in chloroform. However, we found that some of the P(3HB-co-3HA) aged for more than 1 month under ambient conditions were not solved in chloroform, but instead swelled when the 3HA fraction was over 14 mol%. On the basis of differential scanning calorimetry and wide-angle x-ray diffraction analyses, we predicted that swellable P(3HB-co-3HA) contained numerous P(3HB) microcrystals, which may form physical crosslinks between adjacent PHA polymer chains.