Nature of nonbonded Se...O interactions characterized by 17O NMR spectroscopy and NBO and AIM analyses

To investigate the nature of nonbonded Se...O interactions, three series of 2-substituted benzeneselenenyl derivatives [2-(CHO)C6H4SeX (1), 2-(CH2OH)C6H4SeX, (2), 2-(CH2OiPr)C6H4SeX (3); X = Cl, Br, CN, SPh, SeAr, Me] were synthesized. The 17O NMR absorption observed for 17O-enriched aldehydes 1 appeared upfield relative to benzaldehyde (PhCHO), while the opposite downfield shifts relative to benzyl alcohol (PhCH2OH) were observed for 17O-enriched alcohols 2 and ethers 3. The magnitude of both the upfield and the downfield shifts became larger as the electron-withdrawing ability of a substituent X increased. Quantum chemical calculations at the B3LYP level revealed that for all model compounds the most stable conformer has an intramolecular nonbonded Se.O interaction. Thus, the relative 17O NMR chemical shifts (DeltadeltaO) for 1-3 would reflect the strengths of the Se...O interactions. The natural bond orbital (NBO) analysis demonstrated that the stabilization energy due to an nO --> sigma Se-X orbital interaction (ESe...O) correlates with the Se...O atomic distance on a single curve irrespective of the type of the O atom. On the other hand, the atoms in molecules (AIM) analysis showed that the nonbonded Se...O interactions can be characterized by the presence of a bond critical point, the total energy density (HSe...O) of which decreases with strengthening of the interaction. The results suggested that Se...O interactions have a dominant covalent character rather than an electrostatic one.     

Molecular interactions between lipid bilayers and a water-soluble polymer

Molecular interactions between lipid bilayers (liposomes) and chondroitin sulfate C (CS), a water soluble polymer, have been investigated in terms of zeta-potential, particle size, microscopic-viscosity, microscopic-polarity of liposomes and permeability of calcein. Microscopic morphology is dramatically changed by the addition of CS to the positively charged liposomes (Pos.L), while it is not changed by the addition to uncharged liposomes (Unc.L) or negatively charged liposomes (Neg.L). The absolute value of the particle size of Pos.L increases with the addition of CS, while the zeta- potential of Pos.L decreases. Permeability of Pos.L decreases with an increase in the concentration of CS. Phase transition temperature of Pos.L is changed after the addition of CS. These values, however, are not changed for the other liposomes by the addition of CS. The results of gel filtration chromatography show that CS is absorbed on the Pos.L surface. Microscopic viscosity is also increased by the addition of CS to Pos.L due to the adsorption of CS.     

An improved catalyst for the asymmetric arylation of ketone enolates

A new catalyst system for the enantioselective alpha-arylation of ketones is reported. This catalyst, prepared from Pd(2)(dba)(3) and a bulky dialkylphosphino-binaphthyl ligand, is able to effect the asymmetric arylation of ketone enolates with aryl bromides utilizing NaO(t)()Bu as base. These new catalysts enjoy much higher reactivity than previous systems; arylation reactions could be effected at room temperature with only 2 mol % of the Pd catalyst. The coupling of alpha-alkyl-alpha'-protected cyclopentanones proceeded in high yield, and the resulting quaternary stereogenic center was installed in up to 94% ee.     

Evaluation of interfacial toughness curve of bimaterial in submicron scale

A novel method combining the experimental data at only two different mixed mode fractures and an empirical interface toughness function has been proposed to establish the interfacial toughness function of a bimaterial in submicron scale. The modified four-point bend specimen was used in experiment to evaluate the first type of mixed mode fracture, while the sandwiched cantilever specimen was employed to get the second one. An empirical interface toughness function reflecting quite accurately the delamination behavior was adopted as a typical one. The obtained results investigated that the proposed method could be used to calibrate not only the interfacial fracture criteria at pure modes but also at any mixed mode fracture of bimaterials in submicron scale.     

Fine Tunable,Redox Active Octapalladium Chains Supported by Linear Tetraphosphines,Leading to Dynamically 1D Self-Assembled Coordination Polymers

A series of the octapalladium chains supported by meso-Ph₂PCH₂P(Ph)CH₂P(Ph)CH₂PPh₂ (meso-dpmppm) ligands, [Pd₈(meso-dpmppm)₄(L)₂](BF₄)₄ (L=none ( 1 ), solvents: CH₃CN ( 2 a ), dmf ( 2 b ), dmso ( 2 c ), RN≡C: R=Xyl ( 3 a ), Mes ( 3 b ), Dip ( 3 c ), ^tBu ( 3 d ), Cy ( 3 e ), CH₃(CH₂)₇ ( 3 f ), CH₃(CH₂)₁₁ ( 3 g ), CH₃(CH₂)₁₇ ( 3 h )) and [Pd₈(meso-dpmppm)₄(X)₂](BF₄)₂ (X=Cl ( 4 a ), N₃ ( 4 b ), CN ( 4 c ), SCN ( 4 d )), were synthesized by using 2 a as a stable good precursor, and characterized by spectroscopic (IR, ¹H and ³¹P NMR, UV-vis-NIR, ESI-MS) measurements and X-ray crystallographic analyses (for 1 , 2 a , b , 3 a , b , e , f , 4 a – d ). On the basis of DFT calculations on the X-ray determined structure of 2 b ( [2b-Pd₈]⁴⁺ ) and the optimized models [Pd₈(meso-Ph₂PCH₂P(H)CH₂P(H)CH₂PH₂)₄(CH₃CN)₂]⁴⁺ ( [Pd₈Ph₈]⁴⁺ ) and [Pd₈(meso-H₂PCH₂P(H)CH₂P(H)CH₂PH₂)₄(CH₃CN)₂]⁴⁺ ( [Pd₈H₈]⁴⁺ ), with and without empirically calculating dispersion force stabilization energy (B3LYP-D3, B3LYP), the formation energy between the two Pd₄ fragments is assumed to involve mainly noncovalent interactions (ca. −70 kcal/mol) with four sets of interligand C−H/π interactions and Pd⋅⋅⋅Pd metallophilic one, while electron shared covalent interactions are almost canceled out within the Pd₈ chain. All the compounds isolated are stable in solution and exhibit characteristic absorption at ∼900 nm, which is assignable to a spin allowed HOMO to LUMO transition, and shows temperature dependent intensity change with variable absorption coefficients presumably due to coupling with some thermal vibrations. The structures and electronic states of the Pd₈ chains are found finely tunable by varying the terminal capping ligands. In particular, theoretical calculations elucidated that the HOMO-LUMO energy gap is systematically related to the central Pd−Pd distance (2.7319(6)–2.7575(6) Å) by two ways with neutral ligands L ( 1 , 2 , 3 ) and with anionic ligands X ( 4 ), which are reflected on the NIR absorption energy of 867–954 nm. The isocyanide terminated Pd₈ complexes ( 3 ) further reacted with excess of RNC (6 eq) to afford the Pd₄ complexes, [Pd₄(meso-dpmppm)₂(RNC)₂](BF₄)₂ ( 13 ), and the cyclic voltammograms of 2 a (L=CH₃CN), 3 , and 13 (R=Xyl, Mes, ^tBu, Cy) demonstrated wide range redox behaviors from 2{Pd₄}⁴⁺ to 2{Pd₄}⁰ through 2{Pd₄}²⁺↔{Pd₈}⁴⁺, {Pd₈}³⁺, and {Pd₈}²⁺ strings. The oxidized complexes, [Pd₄(meso-dpmppm)₂(RNC)₃](BF₄)₄ ( 16 ), were characterized by X-ray analyses, and the two-electron reduced chain of [Pd₈(meso-dpmppm)₄](BF₄)₂ ( 7 ) was analyzed by spectroscopic and electrochemical techniques and DFT calculations. Reactions of 2 a with 1 equiv. of aromatic linear bisisocyanide (BI) in CH₂Cl₂ deposited insoluble coordination polymers, {[Pd₈(meso-dpmppm)₄(BI)](BF₄)₄}_n ( 5 ), and interestingly, they were soluble in acetonitrile, ³¹P{¹H} and ¹H DOSY NMR spectra as well as SAXS curves suggesting that the coordination polymers may exist in acetonitrile as dynamically 1D self-assembled coordination polymers comprising ca. 50 units of the Pd₈ rod averaged within the timescale.     

Identification of conjugation positions of urinary glucuronidated vitamin D3 metabolites by LC/ESI–MS/MS after conversion to MS/MS‐fragmentable derivatives

A liquid chromatography/electrospray ionization–tandem mass spectrometry‐based method was developed for the identification of the conjugation positions of the monoglucuronides of 25‐hydroxyvitamin D₃ [25(OH)D₃] and 24,25‐dihydroxyvitamin D₃ [24,25(OH)₂D₃] in human urine. The method employed derivatization with 4‐(4‐dimethylaminophenyl)‐1,2,4‐triazoline‐3,5‐dione to convert the glucuronides into fragmentable derivatives, which provided useful product ions for identifying the conjugation positions during the MS/MS. The derivatization also enhanced the assay sensitivity and specificity for urine sample analysis. The positional isomeric monoglucuronides, 25(OH)D₃‐3‐ and ‐25‐glucuronides, or 24,25(OH)₂D₃‐3‐, ‐24‐ and ‐25‐glucuronides, were completely separated from each other under the optimized LC conditions. Using this method, the conjugation positions were successfully determined to be the C3 and C24 positions for the glucuronidated 25(OH)D₃ and 24,25(OH)₂D₃, respectively. The 3‐glucuronide was not present for 24,25(OH)₂D₃, unlike 25(OH)D₃, thus we found that selective glucuronidation occurs at the C24‐hydroxy group for 24,25(OH)₂D₃.     

Cyclic sample pooling using two‐dimensional liquid chromatography system enhances coverage in shotgun proteomics

We report a cyclic sample pooling technique devised in two‐dimensional liquid chromatography–electrospray ionization mass spectrometry (LC‐ESI‐MS) shotgun proteomics that renders deeper proteome coverage; we combined low pH reversed‐phase (RP) LC in trifluoroacetic acid in the first dimension, followed by cyclic sample pooling of the eluate and low‐pH RP‐LC in formic acid in the second dimension. The new protocol has a significantly higher resolving power suitable for LC‐ESI‐MS/MS shotgun proteomics. Copyright © 2013 John Wiley & Sons, Ltd.     

Birefringence control by hydrogen bonding on compatible polymer pair composed of hydrogenated ring‐opening polymer and modified polystyrene

A new polymer blend composed of a hydrogenated ring‐opening polymer (HROP) with an ester group and hydroxyl functionalized polystyrene (HFP) produced the excellent transparent materials which enabled a precise birefringence control in keeping with the other physical properties for optical film use. The blend with a composition from 0.28 to 0.35 for the HFP weight fraction showed an extraordinary wavelength dispersion, transmitting through a zero birefringence point at the critical fraction of 0.45, while each polymer showed an ordinary wavelength dispersion. The observed excellent transparency even above those of the glass transition temperature was attributed to a depressed phase separation that resulted from strong hydrogen bond between the ester and hydroxyl groups. An IR analysis of the film demonstrated a remarkable red‐shift in the carbonyl peak with an increase of the hydroxylated polystyrene content, indicating a strong hydrogen bond between those groups. This new polymer blend provides a useful design to achieve practical demands for film use, both optical and mechanical under the fabrication conditions using the melt extrusion technique. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 3132–3143     

Dissipative structure for symmetric hyperbolic systems with memory

We study symmetric hyperbolic systems with memory-type dissipation and investigate their dissipative structures. We treat two cases: memory-type diffusion and memory-type relaxation, and observe that the dissipative structures of these two cases are essentially different. Namely, we show that the dissipative structure of the system with memory-type diffusion is of the standard type, while that of the system with memory-type relaxation is of the regularity-loss type.