Synthesis of substituted polymethylenes by radical polymerization of N,N,N′,N′-tetraalkylfumaramides and their characterization

Radical polymerization of N,N,N′,N′-tetraalkylfumaramides (TRFAm) bearing methyl, ethyl, n-propyl, isopropyl, and isobutyl groups as N-substituents (TMFAm, TEFAm, TnPFAm, TIPFAm, and TIBFAm, respectively) was investigated. In the polymerization of TEFAm initiated with 1,1′-azobiscyclohexane-1-carbonitrile (ACN) in benzene, the polymerization rate (R_p) was expressed as follows: R_p = k [ACN]^0.28 [TEFAm]^1.26, and the overall activation energy was 102.1 kJ/mol. The introduction of a bulky alkyl group into N-substituent of TRFAm decreased the R_p in the following order: TMFAm > TEFAm > TnPFAm > TIBFAm > TIPFAm ～ 0. The relative reactivities of these monomers were also investigated in radical copolymerization with styrene (St) and methyl methacrylate (MMA). In copolymerization of TRFAm (M₂) with St (M₁), monomer reactivity ratios were determined to be r₁ = 1.07 and r₂ = 0.20 for St–TMFAm, and r₁ = 1.88 and r₂ = 0.11 for St–TEFAm, from which Q₂ and e₂ values were estimated to be 0.35 and 0.44 for TMFAm, and 0.19 and 0.47 for TEFAm, respectively. The other TRFAm were also copolymerized with St, but copolymerization with MMA gave polymers containing a small amount of TRFAm units. The polymer from TRFAm consists of a less-flexible poly(N,N-dialkylaminocarbonylmethylene) structure. The solubility and thermal property of the polymers were also investigated.     

Highly diastereoselective chemoenzymatic synthesis of (2′R)- and (2′S)-2′-deoxy[2′-H]guanosines

In an effort to develop an efficient synthetic method of highly diastereoselective (2′R)- and (2′S)-2′-deoxy[2′-²H]guanosines, chemoenzymatic conversion was investigated. The synthesis of (2′R > 98% de)-2′-deoxy[2′-²H]guanosine was achieved by biological transdeoxyribosylation using (2′R > 98% de)-2′-deoxy[2′-²H]uridine, 2,6-diaminopurine, and Enterobacter aerogenes AJ-11125, followed by treatment with adenosine deaminase. (2′S > 98% de)-2′-Deoxy[2′-²H]guanosine was synthesized from (2′S > 98% de)-2′-deoxy[2′-²H]uridine and 2,6-diaminopurine using thymidine phosphorylase and purine nucleoside phosphorylase instead of E. aerogenes AJ-11125.     

Molecular metamagnet [Ni(4ImNNH)(2)(NO(3))(2)] (4ImNNH = 4-imidazolyl nitronyl nitroxide) and the related compounds showing supramolecular H-bonding interactions

A new chelating radical ligand 4ImNNH (2-(4-imidazolyl)-4,4,5,5-tetramethylimidazolin-1-oxyl 3-oxide) was prepared, and complexation with divalent transition metal salts gave complexes, [M(4ImNNH)(2)X(2)], which showed intermolecular ferromagnetic interaction in high probability (7 out of 10 paramagnetic compounds investigated here). The nitrate complexes (X = NO(3); M = Mn (1), Co (2), Ni (3), Cu (4)) crystallize isomorphously in monoclinic space group P2(1)/a. The equatorial positions are occupied with two 4ImNNH chelates and the nitrate oxygen atoms are located at the axial positions. Magnetic measurements revealed that the intramolecular exchange couplings in 1, 2, and 4 were antiferromagnetic, while that in 3 was ferromagnetic with 2J/k(B) = +85 K, where the spin Hamiltonian is defined as H = -2J(S(1).S(2) + S(2).S(3)) based on the molecular structures determined as the linear radical-metal-radical triads. The intramolecular ferromagnetic interaction in 3 is interpreted in terms of orthogonality between the radical pi and metal dsigma orbitals. Compounds 1-3 exhibited intermolecular ferromagnetic interaction ascribable to a two-dimensional hydrogen bond network parallel to the crystallographic ab plane. Complex 3 became an antiferromagnet below 3.4 K and exhibited a metamagnetic transition on applying a magnetic field of 5.5 kOe at 1.8 K. The complexes prepared from metal halides, [M(4ImNNH)(2)X(2)] (X = Cl, Br; M = Mn, Co, Ni, Cu), showed intramolecular antiferromagnetic interactions, which are successfully analyzed based on the radical-metal-radical system. The crystal structures determined here on 1-4, [Mn(4ImNNH)(2)Cl(2)], and [Cu(4ImNNH)(2)Br(2)] always have intermolecular hydrogen bonds of H(imidazole).X(axial ligand)-M, where X = NO(3), Cl, Br. This interaction seems to play an important role in molecular packing and presumably also in magnetic coupling.     

Classification of Simple Oxides: A Polarizability Approach

A simple oxide classification has been proposed on the basis of correlation between electronic polarizabilities of the ions and their binding energies determined by XPS. Three groups of oxides have been considered taking into account the values obtained on refractive-index- or energy-gap-based oxide ion polarizability, cation polarizability, optical basicity, O 1s binding energy, metal (or nonmetal) binding energy, and Yamashita-Kurosawa's interaction parameter of the oxides. The group of semicovalent predominantly acidic oxides includes BeO, B₂O₃, P₂O₅, SiO₂, Al₂O₃, GeO₂, and Ga₂O₃ with low oxide ion polarizability, high O 1s binding energy, low cation polarizability, high metal (or nonmetal) outermost binding energy, comparatively low optical basicity, and strong interionic interaction, leading to the formation of strong covalent bonds. Some main group oxides so-called ionic or basic such as CaO, In₂O₃, SnO₂, and TeO₂ and most transition metal oxides show relatively high oxide ion polarizability, O 1s binding energy in a very narrow medium range, high cation polarizability, and low metal (or nonmetal) binding energy. Their optical basicity varies in a narrow range and it is close to that of CaO. The group of very ionic or very basic oxides includes CdO, SrO, and BaO as well as PbO, Sb₂O₃, and Bi₂O₃, which possess very high oxide ion polarizability, low O 1s binding energy, very high cation polarizability, and very low metal (or nonmetal) binding energy. Their optical basicity is higher than that of CaO and the interionic interaction is very weak, giving rise to the formation of very ionic chemical bonds.     

X-ray scattering by water molecules studied by using synchrotron radiation

The energy spectra of free water molecules were measured at scattering angles 2θ ranging from 10.5° to 75.7°, using an angle-dispersive-type diffractometer and synchrotron radiation as an X-ray source. A silicon (111) monochrometer was used to obtain incident X-rays with the wavelengths of (1.543/n) Å (n = 1,3,4,5). Observed inelastic scattering peaks are clearly separated from eleastic ones at s values [s = (4π/λ) sin Å] larger than 8 Å^?1. The increase of the separation with an increasing s value was consistent with the classical theory of the Compton shift. The total (elastic plus inelastic) intensities were obtained over a range of s = 0.74–5.0 Å^?1. Experimental difference intensities Δσ_ee and Δσ_ne were obtained separately by combining the X-ray and high-energy electron scattering data. The experimental results are in reasonable agreement with the theoretical intensities calculated from SCF and CI molecular wave functions with a basis set of double-zeta plus polarization functions. © 1994 John Wiley & Sons, Inc.     

Flow-injection determination of copper(II) based on its catalysis on the redox reaction of cysteine with iron(III) in the presence of 1,10-phenanthroline

A redox reaction of cysteine with iron(III) proceeds slowly in the presence of 1,10-phenanthroline (phen). However, this reaction is accelerated in the presence of copper(II) as a catalyst, producing an iron(II)-phen complex (lambda(max)=510 nm). A sensitive spectrophotometric flow-injection method is proposed for the determination of copper(II) based on its catalytic action on this redox reaction. The dynamic range was 0.1-10 ng ml(-1) of copper(II) with a relative standard deviation of 1.0% (n=10) for 1.0 ng ml(-1) of copper(II) at a sampling rate of 30 h(-1). The detection limit (S/N=3) is 0.04 ng ml(-1). The proposed method was successfully applied to the determination of copper in river water as a certified reference material.     

Synthesis of [5'-13C]ribonucleosides and 2'-deoxy[5'-13C]ribonucleosides

The present efficient synthesis of [5'-13C]ribonucleosides and 2'-deoxy[5'-13C]ribonucleosides is characterized by the synthesis of the D-[5-13C]ribose derivative as an intermediate via the Wittig reaction of 4-aldehydo-D-erythrose dialkyl acetals with Ph3P13CH3I-BuLi to introduce the 13C label at the 5-position of a pentose. This was followed by the highly diastereoselective osmium dihydroxylation for the preparation of 2,3-di-O-benzyl-D-[5-13C]ribose dialkyl acetal and the cyclization from D-[5-13C]ribose dialkyl acetal derivatives to the alkyl D-[5-13C]ribofuranoside derivative by the use of LiBF(4). The obtained D-[5-13C]ribose derivative was converted into [5'-13C]ribonucleosides and subsequently into the corresponding 2'-deoxynucleosides.     

Kinetic-catalytic determination of traces of iron by the oxidative coupling reaction of 3-methyl-2-benzothiazolinone hydrazone with N,N-dimethylaniline

A new kinetic-catalytic method by the initial rate procedure for the determination of nanogram level of iron(III) is developed, which is based on its catalytic effect on the oxidative coupling of 3-methyl-2-benzothiazolinone hydrazone (MBTH) with N,N-dimethylaniline (DMA) to form an indamine dye (λ_max=590 nm) in the presence of hydrogen peroxide. Iron(II) is also determined, being oxidized to iron(III) by hydrogen peroxide. Calibration graphs obtained by the initial rate method are linear in the range 1–1000 ng ml⁻¹ Fe and as low as 10⁻⁸ M Fe(II, III) can easily be determined. The relative standard deviations are 6.6, 2.5 and 1.5% for ten determinations of 1, 20 and 60 ng ml⁻¹ of Fe(III), respectively. The method is applicable to the determination of iron in natural waters without preconcentration and separation.     

Effects of ortho-substituents on reactivities,tacticities, and ceiling temperatures of radical polymerizations of phenyl methacrylates

Radical polymerization and copolymerization of some o-alkylphenyl methacrylates were carried out and the effect of the ortho-substituents on the ability to homopolymerize, on the monomer reactivities, and on the ceiling temperatures of the monomers was studied. The effect of the substituent on tacticities and thermal stabilities of the polymers formed was also discussed. The ability to honiopolymerize and the monomer reactivity were considerably decreased by the introduction of the o-substituent. 2,6-Di-tert-butylphenyl methacrylate formed no methanol-insoluble polymer at 60°C. On the basis of the tacticity determined it was noted that the o-substituted phenyl methacrylates preferred syndiotactic addition in the propagation reaction less than did phenyl methacrylate or methyl methacrylate. The polymers formed from the o-substituted monomers were thermally less stable than poly(phenyl methacrylate), and, consistent with this finding, ceiling temperatures of the o-substituted phenyl methacrylates seemed to be lower than that of phenyl methacrylate. The effects observed were characteristic of the o-substituents conformationally close to the carbon-carbon double bond of the monomer or the carbon carrying the unpaired electron of the polymer radical.     

Combined analysis of microwave and infrared spectra of methyl iodide: rotational and l-type doubling constants of the v5, v3+v6 and v2 states

The rotational constant B and the l-type doubling constant q were determined for the v₅, v₃+v₆ and v₂, states of CH₂I from the microwave transition frequencies, in combination with the infrared data previously reported. Since these vibrational states were coupled through the Fermi resonance and the xy-type E-E and A₁-E Coriolis resonances, the analysis was made by setting up and solving the complete form of the secular determinants of the energy matrices. The rotational and l-type doubling constants were determined as B₅, = 0.250 173 cm^?1, B₃₆ = 0.247 600 cm^?1, B₂ = 0.249 369 cm^?1, q₅ = ?0.000 027 cm^?1 and q₃₆ = ?0.000 179 cm^?1, which are unperturbed by Fermi and Coriolis interactions. Other band constants for v₅ and v₃+v₆ were also refined in accordance with the new values of B₅ and B₃₆. The present study indicated that the combined analysis of microwave and infrared spectral data was useful for the precise determination of vibration-rotation, levels in the perturbed system.