Curdlan as a Polymeric Starting Material to Access C6-Modified Glucose Derivatives

We evaluated the potential of a linear β-1,3-glucan (curdlan) as a starting material to access C6-modified glucose derivatives and found that 6-bromo-6-deoxyglucose, 6-azide-6-deoxyglucose, and 6-acetamido-6-deoxyglucose could be readily prepared from curdlan through its C6-selective and quantitative modifications and subsequent acid-catalyzed hydrolysis.     

An improved catalyst for the asymmetric arylation of ketone enolates

A new catalyst system for the enantioselective alpha-arylation of ketones is reported. This catalyst, prepared from Pd(2)(dba)(3) and a bulky dialkylphosphino-binaphthyl ligand, is able to effect the asymmetric arylation of ketone enolates with aryl bromides utilizing NaO(t)()Bu as base. These new catalysts enjoy much higher reactivity than previous systems; arylation reactions could be effected at room temperature with only 2 mol % of the Pd catalyst. The coupling of alpha-alkyl-alpha'-protected cyclopentanones proceeded in high yield, and the resulting quaternary stereogenic center was installed in up to 94% ee.     

Synthesis and Polymerization of (S)-4-Methyl-2-N,N-dimethylaminopentyl Methacrylate

(S)-4-Methyl-2-N,N-dimethylaminopentyl methacrylate (DMAPM) was synthesized from the reaction of N,N-dimethyl-L-leucinol with methacryl chloride, and its radical polymerization was investigated. It was found that DMAPM readily polymerized by α,α¹-azobisisobutyronitrile (AIBN) as an initiator to give poly-DMAPM. The copolymerization of DMAPM(M₁) with styrene(Mz) was also studied in various solvents with AIBN as an initiator at 60°C. From the result obtained in benzene, Q and e values of DMAPM were determined to be 0.64 and -0.04, respectively. Specific rotations of the copolymers of DMAPM with styrene were not proportional to the weight percent of the DMAPM unit incorporated, but the observed relation gave a downward curve. The copolymerizations DMAPM with α, β-disubstituted monomers such as maleic acid, maleimide, and N-phenylmaleimide were carried out in order to induce asymmetric center in the polymer chain. After hydrolysis of the copolymers obtained, the hydrolyzed polymers were found to be optically active, suggesting an induction of asymmetric center into the polymer chain.     

Titanosilicate molecular sieve for size-screening photocatalytic conversion

Titanosilicate molecular sieves, when activated by ultraviolet light irradiation in water in the presence of molecular oxygen, catalyze a conversion of molecules having a size close to the pore of the catalysts but are inactive for molecules having much larger or smaller size. This unprecedented size-screening photocatalytic activity is triggered by a combination of H2O-induced shortened lifetime of active species (charge-transfer excited state of tetrahedrally coordinated titanium oxide) and restricted diffusion of a molecule inside the pore. This catalytic property demonstrates a potential utility of the catalyst for selective transformation of molecules that is associated with a size reduction of molecules, so-labeled "molecular shave" transformation.     

Quantitative estimation of NH3 partial pressure in H2 desorbed from the Li-N-H system by Raman spectroscopy

The partial pressure of NH3 gas estimated by Raman spectroscopy indicates that approximately 0.1% NH3 inevitably contaminates the H2 desorbed from a hydrogen storage material composed of LiH and LiNH2 at any temperature up to 400 degrees C in a closed system.     

Preparation of Sr2CeO4:Eu3+,Dy3+ white luminescence phosphor particles and thin films by using an emulsion liquid membrane system

Sr(2)CeO(4) and Sr(2)CeO(4):Eu(3+),Dy(3+) phosphor particles and thin films were prepared by using an emulsion liquid membrane (ELM, water-in-oil-in-water (W/O/W) emulsion) system, containing VA-10 (2-methyl-2-ethylheptanoic acid) as extractant (cation carrier). A two-step extraction enabled efficient extraction for Sr(3+) and rare earth ions, and the resulting precursor metal oxalate particles produced in the internal water phase of the ELM system were about 60 nm in diameter. Calcination of the oxalate particles in air gave submicrometer-sized Sr(2)CeO(4) and Sr(2)CeO(4):Eu(3+),Dy(3+) particles, which showed blue and white luminescence, respectively, by UV excitation. Blue and white luminescence phosphor thin films were also prepared by soaking alumina substrates into the W/O emulsion containing precursor oxalate particles, followed by calcination in air.     

Supramolecular triangular and linear arrays of metal-radical solids using pyrazolato-silver(I) motifs

New chelating radical ligands pzNNH, pzINH, and pzbisINH (3-pyrazolyl nitronyl nitroxide, 3-pyrazolyl imino nitroxide, and pyrazole-3,5-diyl bis(imino nitroxide), respectively) were prepared. Complexation of these ligands with Ag+ gave [Ag(pzNN)]n, [Ag(pzIN)]6, and [Ag(pzbisIN)]n containing the corresponding anionic forms of the ligands. From the X-ray crystal structure analysis, [Ag(pzIN)]6 was characterized as a dimer of almost planar triangular moieties where the pyrazolate worked as a bridge, and metal-metal bonds brought about dimerization of triangles. [Ag(pzbisIN)]n was characterized as a uniform zigzag chain consisting of pyrazolate bridges and Ag ions with a cis-Npz-Ag-Npz coordination structure. Antiferromagnetic interactions observed could be analyzed based on the structures determined for both compounds. Ferromagnetic coupling was observed in [Ag(pzNN)]n, and a polymeric structure was assumed although the crystal structure could not be determined. Novel supramolecular architectures using pyrazolate-substituted imino nitroxides have been developed, using the unique coordinative versatility of the pyrazolate derivatives     

Micro-thermal analysis of thermal conductance distribution in advanced silicon nitrides

A micro-thermal analysis technique was applied to investigate advanced silicon nitride materials, which exhibit high thermal conductivity. Local thermal properties in the microstructure were evaluated, and the grain boundaries were observed to have lower thermal conductance than the Si₃N₄ grains. It was found that thermal conductance both in the grains and boundaries was lowered by the addition of the sintering aid Al₂O₃, which is soluble in Si₃N₄ grains. This indicates that high thermal conductivity in silicon nitride ceramics is achieved both by grain growth, leading to a reduction in boundary density, and by eliminating soluble elements in silicon nitride grains. This revised version was published online in August 2006 with corrections to the Cover Date.     

Aqueous Titanate Sols from Ti Alkoxide-α-Hydroxycarboxylic Acid System and Preparation of Titania Films from the Sols

Aqueous titanate sols were prepared by reactions of titanium tetraisopropoxide (TIP) with -hydroxycarboxylic acids in water. IR and Raman spectra, and elemental analyses of the precipitates obtained from the sols revealed that the carboxylates were chelated to titanium but the Ti species were polymerized to form a cluster that had a colloidal nature. Spin-coating of titania (TiO₂) thin films from these sols was also examined. Interestingly, it was found that (004) preferentially oriented anatase films with refractive index of 2.54 were obtained from TIP-lactic acid-NH₃ (1:1:1, molar ratio) aqueous sol. This crystallographic orientation was characteristic of the TIP-lactic acid-NH₃ (1:1:1) system, and was not affected by the kinds of substrates used and the heating rate of the film. TEM observation indicated that small anatase grains had already formed at 200°C. Therefore, the crystallographic orientation might depend strongly on the structure of the chemical species of the precursor solutions.