Concentration dependences of dielectric properties at 105 Hz and 106 Hz for aqueous solutions of hydroxypropyl cellulose

The concentration dependences of dielectric properties measured at 10⁵ Hz and 10⁶ Hz are reported for aqueous solutions of hydroxypropyl cellulose. Phase behaviour of the solutions was also observed with a polarizing optical microscope. For solutions with concentrations well above 40 wt %, polydomain textures, including the banded texture, were observed after a prehistory of deformation. No significant discontinuous changes in the dielectric constant, ε_r′, and loss factor, ε_r″, were found at the concentrations around the onset of the isotropic–cholesteric phase transition and in the biphasic region. In contrast, the steeper changes in ε_r′ and ε_r″ were found at the critical concentration for the fully developed cholesteric phase transition with the polydomain textures.     

NMR analysis of lignins in CAD-deficient plants. Part 1. Incorporation of hydroxycinnamaldehydes and hydroxybenzaldehydes into lignins

Peroxidase/H2O2-mediated radical coupling of 4-hydroxycinnamaldehydes produces 8-O-4-, 8-5-, and 8-8-coupled dehydrodimers as has been documented earlier, as well as the 5-5-coupled dehydrodimer. The 8-5-dehydrodimer is however produced kinetically in its cyclic phenylcoumaran form at neutral pH. Synthetic polymers produced from mixtures of hydroxycinnamaldehydes and normal monolignols provide the next level of complexity. Spectral data from dimers, oligomers, and synthetic polymers have allowed a more substantive assignment of aldehyde components in lignins isolated from a CAD-deficient pine mutant and an antisense-CAD-downregulated transgenic tobacco. CAD-deficient pine lignin shows enhanced levels of the typical benzaldehyde and cinnamaldehyde end-groups, along with evidence for two types of 8-O-4-coupled coniferaldehyde units. The CAD-downregulated tobacco also has higher levels of hydroxycinnamaldehyde and hydroxybenzaldehyde (mainly syringaldehyde) incorporation, but the analogous two types of 8-O-4-coupled products are the dominant features. 8-8-Coupled units are also clearly evident. There is clear evidence for coupling of hydroxycinnamaldehydes to each other and then incorporation into the lignin, as well as for the incorporation of hydroxycinnamaldehyde monomers into the growing lignin polymer. Coniferaldehyde and sinapaldehyde (as well as vanillin and syringaldehyde) co-polymerize with the traditional monolignols into lignins and do so at enhanced levels when CAD-deficiency has an impact on the normal monolignol production. The implication is that, particularly in angiosperms, the aldehydes behave like the traditional monolignols and should probably be regarded as authentic lignin monomers in normal and CAD-deficient plants.     

The Pt-catalyzed carboselenation of alkynes by selenoesters

[reaction: see text] The Pt-catalyzed carboselenation of terminal alkynes with selenoesters provided vinylselenides regio- and stereoselectively in moderate yields.     

Rapid determination of sulphonamides in milk using liquid chromatographic separation and fluorescamine derivatization.

A simple and selective method is presented for the multiple residue determination of eight sulphonamides in consumers' milk. The drugs are sulphisomidine (ID), sulphadiazine (DZ), sulphamerazine, sulphadimidine, sulphamonomethoxine, sulphamethoxazole, sulphadimethoxine and sulphaquinoxaline (SQ). The milk sample was deproteinized with the same volume of 2 M hydrochloric acid and filtered. A 1-ml volume of the filtrate was mixed with 1 ml each of 1.25 M sodium acetate solution and a buffer (pH 3.0) for derivatization with 0.6 ml of 0.02% fluorescamine solution in acetone. A high-performance liquid chromatographic analysis was carried out on a C18 column with a mobile phase of acetonitrile-2% acetic acid (3:5) at 55 degrees C using a fluorescence detector at an excitation wavelength of 405 nm and an emission wavelength of 495 nm. Average recoveries at fortification levels of 2, 5 and 10 ng/ml were 114%, 109% and 106%, respectively. Relative standard deviations were 1-4% at 10 ng/ml for ID, 5 ng/ml for DZ and SQ and 2.5 ng/ml for the other five sulphonamides. The method was applied to 25 milk samples and all appeared to be free from the drugs.     

Free radical copolymerization of sulfur dioxide with phenylacetylene

Free radical copolymerization of sulfur dioxide with phenylacetylene (PA) in o-dichlorobenzene was studied in a range of temperatures from 30 to 80^oC as a function of total monomer concentration ([SO₂] + [PA]). PA content in the copolymers increases with decreasing total monomer concentration and increasing temperature. M _w/M _n becomes sharper with decreasing the total monomer concentration, but does not depend upon feed compositions which are changed keeping total monomer concentration constant at 2, 4, and 6 mol/L, respectively. These results strongly indicate the existence of depropagation. Thermal decomposition of the copolymers happens more easily than PA homopolymer and the carbon-centered free radicals are detected during the decomposition. Reactivity of ～ CH??(Ph) free radical (～ PA · ) is also discussed.     

Unique Thermal Structural Phase Transitions Exhibited by Unsymmetrical Organometallic Gold(III)-Dithiolene Complexes with Pentylthio and Hexylthio Groups

Unsymmetrical gold(III)-dithiolene complexes are potential candidates for molecular materials that exhibit thermal structural phase transitions. In this study, unsymmetrical ppy-gold(III) (ppy⁻=C-deprotonated-2-phenylpyridine(−)) complexes [AuC5] and [AuC6] coordinated by dithiolene ligands containing tetrathiafulvalene (TTF) skeletons with pentylthio (2-{bis(pentylthio)-1,3-dithiol-2-ylidene}-1,3-dithiol-4,5-dithiolate(2−)) and hexylthio groups (2-{bis(hexylthio)-1,3-dithiol-2-ylidene}-1,3-dithiol-4,5-dithiolate(2−)) were synthesized. Both complexes exhibited a large absorption band at approximately 508 nm, owing to intramolecular ligand-to-ligand charge transfer. One-dimensional columnar structures with head-to-tail molecular arrangements around the metal ions were constructed in the crystals. The flexible alkylthio groups were intercalated into crystalline spaces between dithiolene ligands in the columns. [AuC5] exhibits a simple phase transition at 198 °C between crystalline and isotropic phases irreversibly. The crystalline phase of [AuC6] observed at 25 °C melted at 148 °C. Another crystalline phase grew above 148 °C with a very slow crystallization rate from the liquid phase and was completely transformed into an isotropic phase at 200 °C.     

Synthetic studies of vitamin D analogues. IX. Synthesis and differentiation-inducing activity of 1 alpha,25-dihydroxy-23-oxa-, thia-, and azavitamin D3.

Three vitamin D3 analogues, 1 alpha,25-dihydroxy-23-oxavitamin D3 (3), 1 alpha,25-dihydroxy-23-thiavitamin D3 (4) and 1 alpha,25-dihydroxy-23-azavitamin D3 (5) were synthesized. In the differentiation-inducing activity of human myeloid leukemia cells into macrophages in vitro, the 23-aza analogue (5) showed the least activity, while no remarkable differences were observed between the 23-oxa analogue (3) and the 23-thia analogue (4), which were less active than 1 alpha,25-dihydroxyvitamin D3 (1).     

Synthesis and healing properties of poly(arylether sulfone)–poly(alkylthioether) multiblock copolymers containing disulfide bonds

Thermoplastic elastomers composed of soft and hard segments are important elastic and processable synthetic polymers. The microphase‐separated soft domains show low glass transition temperature and possess sufficient chain mobility at room temperature. In this study, we report the synthesis and healing properties of multiblock copolymers containing disulfide bonds as dynamic covalent bonds. The multiblock copolymers composed of poly(arylether sulfone) and poly(alkylthioether) segments were synthesized by oxidative coupling polymerization of the corresponding thiol‐terminated oligomers. Atomic force microscopy phase images, differential scanning calorimetry, and dynamic mechanical analysis curves indicated the microphase‐separated morphology of the multiblock copolymer. Self‐healing properties of the polymer were evaluated by changes in the elongation at break of the cut/adhered samples. The elongation recovery increased with UV irradiation time, and the multiblock copolymer showed a 93% recovery after UV irradiation for 5 h. The healing efficiency induced by UV irradiation, determined by subtracting the recovery without UV irradiation, was calculated to be 51%. According to the UV spectra and solubility changes after UV irradiation, the main healing factor in this study was the crosslinking reactions caused by thiyl radicals generated from UV irradiation instead of disulfide exchange reactions. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 3545–3553     

Novel syntheses of 2,3-dihydro-5H-1,4-benzoxathiepins and 1,2,3,5-tetrahydro-4,1-benzothiazepines

2,3-Dihydro-5H-1,4-benzoxathiepins were prepared by intramolecular Friedel-Crafts reactions of ethyl α-[2-(aryloxy)ethylthio]-α-chloroacetates or by acid-catalyzed cyclizations of ethyl α-[2-(aryloxy)ethylsulfinyl]-acetate. 1,2,3,5-Tetrahydro-4,1-benzothiazepines were similarly prepared.