Morphological change of crystalline polymer films by annealing: substrate‐ and heating/cooling‐rate‐dependent surface roughness

We study the morphological change of crystalline polymer films by annealing using atomic force microscope, X‐ray diffraction, and Fourier transform infrared spectroscopy techniques. As typical samples, we employ high‐density and low‐density polyethylene films prepared by the cast method. After annealing at 135 °C for 4 h, the surface roughness of polyethylene films by the atomic force microscope significantly increases, and the crystallite size by the X‐ray diffraction also shows some increase, while the Fourier transform infrared spectroscopy spectrum hardly exhibits any change. This can be well explained as a result of the growth of crystal structure by recrystallization during annealing. More interestingly, we find that the choice of the substrate and also the heating/cooling rates for annealing significantly influences the surface roughness of the films. Copyright © 2017 John Wiley & Sons, Ltd.     

Enthalpies of mixing of ethanol solution of chiral limonenes at 298.15 K

Enthalpies of mixing of ethanol solution of R- and S-enantiomers of limonene in large concentration have been measured at 298.15 K. The enthalpies of mixing were negligibly small for all concentrations. Enthalpies of mixing showed negative in less than 30 mol%, but positive in more than the high concentration of limonenes. The heterochiral solutions were more stable than each of the homochiral solutions in dilute solutions. The concentration dependence on enthalpies of mixing in dilute concentration of less than 10 mol% was much sharper in inclination than the dense solutions limonene.     

Excess enthalpies of binary mixtures of <Emphasis Type="Italic">ortho</Emphasis>-, <Emphasis Type="Italic">meta</Emphasis>-, and <Emphasis Type="Italic">para</Emphasis>-structural isomers

The excess molar enthalpies of 8 binary mixtures for the o-, m-, and p-isomers of fluoroiodobenzene, fluoromethoxybenzene, bromofluorobenzene, chlorofluoro-benzene, difluorobenzene, fluoromethylbenzene, fluoronitrobenzene, and aminofluoro-benzene were measured at 298.15 K. The changes of the measured enthalpies were very small. The experimental results revealed that the isomers containing two electron-acceptor groups showed the most positive excess enthalpy change, while isomers containing both one electron donor and one electron acceptor group, such as aminofluorobenzene, showed more stable and always the most negative results.     

Characterization of Ultra‐Thin Temperature‐Responsive Polymer Layer and Its Polymer Thickness Dependency on Cell Attachment/Detachment Properties

Ultra thin poly(N‐isopropylacrylamide) (PIPAAm) modified glass coverslips (PIAPAm‐CS) using electron beam irradiation exhibited a clear relationship between the polymer thickness and thermal cell adhesion/detachment behavior. The polymer thickness dependency and the characteristic of ultra thin PIPAAm layer, has been illustrated in terms of the molecular motion of the modified PIPAAm chains. PIPAAm‐CSs surfaces with various area‐polymer densities and thicknesses were characterized by AFM and protein adsorption assay. The newly obtained results gave a further insight into the illustration. Finally, the future application of intelligent surfaces was discussed for fabricating tissue and organ.

     

Preparation and certification of arsenate [As(V)] reference material, NMIJ CRM 7912-a

Arsenate [As(V)] solution reference material, National Metrology Institute of Japan (NMIJ) certified reference material (CRM) 7912-a, for speciation of arsenic species was developed and certified by NMIJ, the National Institute of Advanced Industrial Science and Technology. High-purity As₂O₃ reagent powder was dissolved in 0.8 M HNO₃ solution and As(III) was oxidized to As(V) with HNO₃ to prepare 100 mg kg^-1 of As(V) candidate CRM solution. The solution was bottled in 400 bottles (50 mL each). The concentration of As(V) was determined by four independent analytical techniques—inductively coupled plasma mass spectrometry, inductively coupled plasma optical emission spectrometry, graphite furnace atomic absorption spectrometry, and liquid chromatography inductively coupled plasma mass spectrometry—according to As(V) calibration solutions, which were prepared from the arsenic standard of the Japan Calibration Service system and whose species was guaranteed to be As(V) by NMIJ. The uncertainties of all the measurements and preparation procedures were evaluated. The certified value of As(V) in the CRM is (99.53 ± 1.67) mg kg^-1 (k = 2).     

4-(cyanomethyl)anilinium perchlorate: a new displacive-type molecular ferroelectric

A new organic ferroelectric compound, 4-(cyanomethyl)anilinium perchlorate, proceeds a second-order phase transition from a paraelectric phase (P2(1)/m) to a ferroelectric phase (P2(1)) at 184 K. A perfect ferroelectric hysteresis loop was observed even at 10 KHz. It is the first example of a molecule-based organic ferroelectric whose polarization can be switched at such a high frequency. The temperature dependent second harmonic generation effect shows that the second-order nonlinear coefficient is nearly zero above T(c) and proportional to the spontaneous polarization below T(c), suggesting the occurrence of symmetry breaking, in good agreement with crystal structural determination. The origin of ferroelectricity was ascribed to the displacements of -NH(3)(+) cations and ClO(4)(-) anions from the symmetric positions including a small part of the order-disorder behaviors of the ClO(4)(-) anions.     

Search for a standard model Higgs boson in the H→ZZ→ℓ(+)ℓ(-)νν decay channel with the ATLAS detector

A search for a heavy standard model Higgs boson decaying via H→ZZ→→?(+)?(-)νν, where ?=e, μ, is presented. It is based on proton-proton collision data at √s=7 TeV, collected by the ATLAS experiment at the LHC in the first half of 2011 and corresponding to an integrated luminosity of 1.04 fb(-1). The data are compared to the expected standard model backgrounds. The data and the background expectations are found to be in agreement and upper limits are placed on the Higgs boson production cross section over the entire mass window considered; in particular, the production of a standard model Higgs boson is excluded in the region 340相似文献   

Octave-spanning carrier-envelope phase stabilized visible pulse with sub-3-fs pulse duration

The visible second harmonic of the idler output from a noncollinear optical parametric amplifier was compressed using adaptive dispersion control with a deformable mirror. The amplifier was pumped by and seeded in the signal path by a common 400 nm second-harmonic pulse from a Ti:sapphire regenerative amplifier. Thus, both the idler output and the second harmonic of the idler were passively carrier-envelope phase stabilized. The shortest pulse duration achieved was below 3 fs.     

Synthesis and healing properties of poly(arylether sulfone)–poly(alkylthioether) multiblock copolymers containing disulfide bonds

Thermoplastic elastomers composed of soft and hard segments are important elastic and processable synthetic polymers. The microphase‐separated soft domains show low glass transition temperature and possess sufficient chain mobility at room temperature. In this study, we report the synthesis and healing properties of multiblock copolymers containing disulfide bonds as dynamic covalent bonds. The multiblock copolymers composed of poly(arylether sulfone) and poly(alkylthioether) segments were synthesized by oxidative coupling polymerization of the corresponding thiol‐terminated oligomers. Atomic force microscopy phase images, differential scanning calorimetry, and dynamic mechanical analysis curves indicated the microphase‐separated morphology of the multiblock copolymer. Self‐healing properties of the polymer were evaluated by changes in the elongation at break of the cut/adhered samples. The elongation recovery increased with UV irradiation time, and the multiblock copolymer showed a 93% recovery after UV irradiation for 5 h. The healing efficiency induced by UV irradiation, determined by subtracting the recovery without UV irradiation, was calculated to be 51%. According to the UV spectra and solubility changes after UV irradiation, the main healing factor in this study was the crosslinking reactions caused by thiyl radicals generated from UV irradiation instead of disulfide exchange reactions. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 3545–3553