Gravitational compression dynamics of charged colloidal crystals

We examine the compression of charged colloidal crystals under the influence of gravitational force by monitoring the spatiotemporal variations of Bragg diffraction from the crystal lattice. We use the dilute aqueous dispersions of colloidal silica particles (diameter=216 nm, charge number=733, a particle volume fraction φ=0.06) in the presence of 5-15 μM sodium chloride. The sedimentation profiles of the colloidal crystals along the crystal height are determined by in situ fiber optics reflection spectroscopy. The time evolutions of the sedimentation profiles are calculated by numerical simulations based on a phenomenological continuum model that explicitly incorporates the electrostatic interparticle interactions. The simulation results correctly describe the experiments at sufficiently high ionic strength.     

Charge ordering and carrier generation by air oxidation of a nickel complex with selenium-containing extended-tetrathiafulvalenedithiolate ligands

The structures and electrical properties of ((n)Bu(4)N)[Ni(dmstfdt)(2)] (1), ((n)Bu(4)N)(2)[Ni(dmstfdt)(2)] (2), and ((n)Bu(4)N)(3)[Ni(dmstfdt)(2)](2) (3), where dmstfdt = extended-tetrathiafulvalenedithiolate ligand, were examined. The fresh crystal of 1 was found to be a Mott insulator, but the crystal gradually became highly conducting because of air oxidation. Compound 3 exhibited a semiconducting charge-ordering state.     

Experimental study of internal flow structures in cylindrical rotating detonation engines

The internal flow structures of detonation wave were experimentally analyzed in an optically accessible hollow rotating detonation combustor with multiple chamber lengths. The cylindrical RDC has a glass chamber wall, 20 mm in diameter, which allowed us to capture the combustion self-luminescence. A chamber 70 mm in length was first tested using C₂H₄O₂ and H₂–O₂ as propellants. Images with a strong self-luminescence region near the bottom were obtained, confirming the small extent of the region where most of the heat release occurs as found in our previous research. Based on the visualization experiments, we tested RDCs with shorter chamber walls of 40 and 20 mm. The detonation wave was also observed in the shorter chambers, and its velocity was not affected by the difference in chamber length. Thrust performance was also maintained compared to the longer chamber, and the short cylindrical RDC had the same specific impulse tendency as the cylindrical (hollow) or annular 70-mm chamber RDC. Finally, we calculated the pressure distributions of various chamber lengths, and found they were also consistent with the measured pressure at the bottom and exit. We concluded that the short-chamber cylindrical RDC with equal length and diameter maintained thrust performance similar to the longer annular RDC, further expanding the potential of compact RDCs.     

Daphmanidins C and D, novel pentacyclic alkaloids from Daphniphyllum teijsmanii

[structure: see text] Two novel alkaloids with an unprecedented fused-pentacyclic skeleton, daphmanidins C (1) and D (2), have been isolated from the leaves of Daphniphyllum teijsmanii, and the structures were elucidated on the basis of spectroscopic data. The relative stereochemistry of 1 and 2 was assigned by combination of NOESY correlations and a simulation analysis. Daphmanidin C (1) elevated activity of NGF biosynthesis.     

Photocontrol of cell adhesion and proliferation by a photoinduced cationic polymer surface

In this study photoinduced cation generation, based on the photochemical properties of malachite green (MG), was used for the surface design and in vitro photochemical control of cell adhesion and proliferation. The MG-derivatized surface was prepared by coating a photoreactive polymer as a substrate onto a poly(ethylene terephthalate) (PET) sheet. The photoreactive polymer was radical copolymer of styrene with the MG-derivatized monomer diphenyl(4-vinylphenyl)methane leucohydroxide (degree of substitution of MG unit: 12.4 mol%). Water contact angle measurements and X-ray photoelectron spectroscopy revealed high hydrophobicity and homogeneous distribution of the MG groups on the outermost surface of the coated film, respectively. When the coated film was exposed to ultraviolet light (UV) irradiation at wavelengths of 290-410 nm, a time-dependent color change of the film was observed from pale yellow, before irradiation, to green. These results indicated generation of cations on the film surface by photochemical cation generation of the MG groups, which was quantitatively characterized by force versus distance curves measurements in atomic force microscopic (AFM) observation using a carboxylated AFM tip. The seeding and culture of endothelial cells showed a marked reduction in adhesion on the nonirradiated coated film surface, whereas the UV-irradiated surface promoted cell adhesion and proliferation except for incubation in serum-free medium, which was similar to commercial tissue culture PET sheet. These observations may be due to adsorption of cell adhesive proteins, typified by fibronectin, in serum-containing medium onto the cationized photoreactive copolymer surface by electrostatic interactions.     

Cobalt-catalyzed benzyl-alkynyl coupling

Benzylic halides coupled with 1-alkynylmagnesium halides in the presence of a catalytic amount of Co(acac)₃ to provide 1-aryl-2-alkynes in moderate to good yield.     

Functionalized arylzinc compounds in ethereal solvent: direct synthesis from aryl iodides and zinc powder and application to Pd-catalyzed reaction with allylic halides

Arylzinc compounds, ArZnX, were conveniently prepared in high yields by the reaction of zinc powder with aryl iodides, which contain electron-withdrawing groups such as CO(2)CH(3), CN, Br, or CF(3) at the ortho-, meta- or para-position, or electron-donating groups such as CH(3), OCH(3), or H, at 70 degrees C in THF, at 100 degrees C, or at 130 degrees C in diglyme, respectively. Pd(dba)(2) exhibited an outstanding efficient catalytic effect for the cross-coupling of these ethereal solutions of ArZnX with allylic halides to afford a variety of functionalized allylbenzenes in high yields; the reactions were mostly carried out at 0 degrees C for 5-30 min in the presence of 5 mol % of catalyst. The conversion of the aryl iodides to allylbenzenes via two reactions could be accomplished in one pot.     

Determination of ethanol in alcoholic beverages by high-performance liquid chromatography-flame ionization detection using pure water as mobile phase

A method for the determination of ethanol in alcoholic beverages by high-performance liquid chromatography-flame ionization detection (HPLC-FID) was developed. An FID system could be directly connected to an HPLC system using pure water as a mobile phase. In a durability test using triacontylsilyl (C30)-silica gel stationary phase for 96 h, no significant change in the retention time of four alcohol compounds was observed. So the HPLC separation of alcoholic beverages was carried out on the C30-silica gel stationary phase. On application to the analysis of six kinds of alcoholic beverages, ethanol could be determined accurately by the proposed method.     

Generation of an abasic site in an oligonucleotide by using acid-labile 1-deaza-2'-deoxyguanosine and its application to postsynthetic modification

We developed a new convenient method for generation of an abasic site at the 3'-terminus of an oligonucleotide. This method uses a 1-deaza-2'-deoxyguanosine residue, which easily undergoes depurination under acidic conditions. The abasic site of the oligonucleotide can be further modified with external functional groups. We report herein the chemical stability of 1-deaza-2'-deoxyguanosine in the oligodeoxynucleotide and the application to the postsynthetic modification of an oligonucleotide by utilizing the chemical property of 1-deaza-2'-deoxyguanosine. [Structure: see text]