Thermal stability of ZnO thin film prepared by RF-magnetron sputtering evaluated by thermal desorption spectroscopy

Thermal stability of sputter deposited ZnO thin films was evaluated by thermal desorption spectroscopy (TDS). Desorption of Zn was mainly observed from the films deposited at low O₂/Ar gas ratio and low RF power. In contrast, O₂ desorption was mainly observed from the films deposited at high O₂/Ar gas ratio and high RF power. The amount of desorbed O₂ from the film increased with increasing the O₂/Ar gas flow ratio and the RF power. Furthermore, the desorption temperature of O₂ increased with increasing the RF power during the deposition. Thermal stability of the ZnO films was controlled not only by the O₂/Ar gas flow ratio, but also applied RF power to the target.     

Characterization of Si-added aluminum oxide (AlSiO) films for power devices

Synthesis of Si-added aluminum oxide (AlSiO) films is attempted as an insulating film with both a wide bandgap and a high dielectric constant. Electrical characteristics of AlSiO films are investigated. Leakage current of the AlO film is suppressed by Si addition and is minimized with Si composition ratio of 12%. Capacitance versus voltage (C-V) measurements are carried out for Au/AlSiO/Si MIS structure. Both flat band shift and hysteresis of the C-V characteristics are suppressed by Si addition. A low leakage current is demonstrated for Au/AlSiO/n-SiC MIS structure.     

Low temperature fabrication of 5-10 nm SiO2/Si structure using advanced nitric acid oxidation of silicon (NAOS) method

We have developed the advanced nitric acid oxidation of Si (NAOS) method to form relatively thick (5-10 nm) SiO₂/Si structure with good electrical characteristics. This method simply involves immersion of Si in 68 wt% nitric acid aqueous solutions at 120 °C with polysilazane films. Fourier transform infrared absorption (FT-IR) measurements show that the atomic density of the NAOS SiO₂ layer is considerably high even without post-oxidation anneal (POA), i.e., 2.28 × 10²² atoms/cm², and it increases by POA at 400 °C in wet-oxygen (2.32 × 10²² atoms/cm²) or dry-oxygen (2.30 × 10²² atoms/cm²). The leakage current density is considerably low (e.g., 10⁻⁵ A/cm² at 8 MV/cm) and it is greatly decreased (10⁻⁸ A/cm² at 8 MV/cm) by POA at 400 °C in wet-oxygen. POA in wet-oxygen increases the atomic density of the SiO₂ layer, and decreases the density of oxide fixed positive charges.     

Effect of particle size and shape on nonresonant random laser action of dye-doped polymer random media

We present an experimental study of the light emission from dye-doped polymer random media dispersed with TiO₂ particles of various sizes, shapes, and structures. Random lasing with nonresonant feedback, similar to that for spherically shaped particles that are used for conventional random lasers, is observed for almost all types of particles and aggregates. The efficiency of random lasing for each medium is analyzed using the relationship between the emission spectrum and the transport mean free path (TMFP), which is measured by enhanced backscattering experiments. Results show that the peak emission intensity depends strongly on the particle shape and structure, whereas the spectral linewidth is governed by the TMFP.     

Color Conversion Method for Multiprimary Display Using Matrix Switching

The range of reproducible color, i.e., color gamut, of conventional three-primary display devices is sometimes insufficient for reproducing the natural color of an object through color imaging systems. A multiprimary display is being developed for the purpose of reproducing an expanded color gamut using more than three primary colors. In this paper, a color conversion method is proposed to reproduce the natural color by additive mixture of multiprimary colors. The multiprimary color signal in this conversion method is calculated from the three-dimensional color coordinates CIE-XYZ, considering the dynamic range of each primary color. Divided into some linear elements from the polyhedral color solid of the multiprimary display, the conversion considering the constraint of the dynamic range can be performed by simple calculation without iterative calculation or a huge three-dimensional look up table. A fast computation method with a two-dimensional look-up-table is also presented. Using the proposed method, the result of the color reproduction is experimentally demonstrated by a six-primary projection display.     

Helicity suppression mechanism of decay amplitudes in relativistic quark model

Structures of the matrix elements of two-and four-quark operators are investigated in connection with the argument of “helicity suppression” in the decay amplitudes. The analysis is made by expanding the quark operators in terms of the constituentquark modes in a relativistic way. It is shown that the naive consideration of helicity suppression can be applied to the case of two-quark operators. The situation is quite different in the case of four-quark operators; sometimes we find maximum value of the decay amplitude, which is suppressed according to the naive helicity suppression. It is made clear which aspects of the constituent-quark picture are essential to cause the difference between our results and those from the free quark picture. Remarks are given on nonleptonic decays ofK-andD-mesons.     

Effect of temporal resolution on the estimation of left ventricular function by cardiac MR imaging

The aim of this study was to investigate the effect of temporal resolution on the estimation of left ventricular (LV) function by cardiac magnetic resonance (MR) imaging using a steady-state free precession (SSFP) sequence. Left ventricular function was assessed by cine MR imaging using a segmented SSFP sequence in 10 healthy volunteers. Views per segment (VPS) were set at 8 and 20, resulting in high and low true temporal resolution, respectively. Irrespective of VPS, images were reconstructed at 40 cardiac phases, providing high apparent temporal resolution. Data were analyzed using 40, 20 and 10 phases to simulate different apparent temporal resolutions. Increasing the cardiac phases used for analysis slightly decreased mean end-systolic volume (ESV) and slightly increased mean ejection fraction (EF). No substantial difference in estimates of end-diastolic volume (EDV) was found between VPSs of 8 and 20. Imaging with a VPS of 20 yielded a larger ESV and smaller EF than imaging with a VPS of 8 when 40 phases were used. In conclusion, low true temporal resolution causes overestimation of ESV and underestimation of EF. Improvement of apparent temporal resolution mildly reduces but does not eliminate the errors caused by low true temporal resolution.     

Dual-wavelength injection-locked pulsed laser

An injection-locked pulsed Ti:sapphire laser oscillating at dual wavelengths is demonstrated for the first time to our knowledge. By use of two feedback loops, seeds of two independent master lasers are locked on specific longitudinal modes of a power oscillator, leading to a stable dual-wavelength oscillation over a long time scale. The two injection-locked pulsed outputs completely overlap in time, with spectral purities reaching a Fourier-transform limit. The dual-wavelength oscillation is controlled by the master lasers only, allowing for flexible selectivity of the two wavelengths and full controllability of the relative two-wavelength pulsed energies.