Total synthesis and evaluation of the actin-binding properties of microcarpalide and a focused library of analogues

A comparative investigation shows that hydroxylated 10-membered lactones modeled around the fungal metabolites microcarpalide (1) and pinolidoxin (2) are endowed with selective actin-binding properties. Although less potent than the marine natural product latrunculin A, which represents the standard in the field, nonenolides of this type are significantly less toxic and accommodate substantial structural editing. Most notable is the fact that even an intramolecular transesterification with formation of a hydroxylated butanolide skeleton does not annihilate their microfilament disrupting capacity. This finding calls for a reinvestigation of the biological profile of other fungal metabolites that embody a similar motif. Microcarpalide (1) serving as the calibration point for this comparative study was prepared by total synthesis based on ring-closing metathesis (RCM) as the key step. The chosen route favorably compares to previous approaches to this target and provides further support for the notion that the (E,Z)-configuration of a medium-sized cycloalkene can be controlled by proper choice of the catalyst as previously outlined by our group. 9-epi-Microcarpalide 26 and furanone 27 as representative examples of the "natural productlike" compounds investigated herein have been characterized by crystal structure analysis.     

Mechanistic study of a Pd/C-catalyzed reduction of aryl sulfonates using the Mg-MeOH-NH(4)OAc system

A method for the deoxygenation of phenolic hydroxy groups via aryl triflates or mesylates has been established by using a combination of Pd/C-Mg-MeOH. The addition of NH(4)OAc to the system markedly accelerated the reaction rate and expanded the scope of the reaction. Mechanistic studies suggested that a single-electron transfer process from the Pd(0) center to the benzene ring is involved in the reduction of aryl sulfonates and that NH(4)OAc works as a solubilization reagent of the Mg salt and as an accelerator of the electron transfer, thus enhancing the reaction process. Our method was also applicable to the regioselective deuteration of benzene derivatives with CH(3)OD as the solvent and deuterium source: the original hydroxy group could be efficiently replaced with a deuterium atom.     

Specific isolation of N-terminal fragments from proteins and their high-fidelity de novo sequencing

A new method to determine N-terminal amino acid sequences of multiple proteins at low pmol level by a parallel processing has been developed. The method contains the following five steps: (1) reduction, S-alkylation and guanidination for targeted proteins; (2) coupling with sulfosucccimidyl-2-(biotinamido)ethyl-1,3-dithiopropionate(sulfo-NHS-SS-biotin) to N(alpha)-amino groups of proteins; (3) digestion of the modified proteins by an appropriate protease; (4) specific isolation of N-terminal fragments of proteins by affinity capture using the biotin-avidin system; (5) de novo sequence analysis of peptides by MALDI-TOF-/MALDI-TOF-PSD mass spectrometry with effective utilization of the CAF (chemically assisted fragmentation) method.1 This method is also effective for N-terminal sequencing of each protein in a mixture of several proteins, and for sequencing components of a multiprotein complex. It is expected to become an essential proteomics tool for identifying proteins, especially when used in combination with a C-terminal sequencing method.     

Simultaneous detection of N-terminal fragment ions in a protein mixture using a ruthenium(II) complex

Use of a bis(terpyridine)ruthenium(II) derivative as an N-terminal labeling reagent resulted in the simultaneous detection and individual determination of all the N-terminal fragments of the proteins in a mixture without requiring any separation. All of the N-termini of the guanidinated proteins were labeled selectively by the ruthenium complex (-CO-labeling). After chymotryptic digestion, the fragments were analyzed by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS) and post-source decay (PSD). The -CO moiety exclusively enhanced N-terminal fragment ions in mass spectra and enabled easy N-terminal sequencing. In a mixture containing three different proteins (lysozyme, ubiquitin, and insulin), all of the N-terminal fragment ions labeled with the ruthenium complex were found to produce uniformly intense peaks without the detection of the other unlabeled fragments. The N-terminal sequences of these ions were determined individually by PSD analysis. Application to unknown proteins from Thermus thermophilus HB8 with two-dimensional electrophoretic separation resulted in the successful determination of the N-terminal sequence and easy identification of the target protein.     

Antiferromagnetic or canted antiferromagnetic orderings of Fe(III) d spins of FeX4- ions in BEDT-TTFVO(S).FeX4 (X = Cl, Br) [BEDT-TTFVO(S) = bis(ethylenedithio)tetrathiafulvalenoquinone(-thioquinone)-1,3-dithiolemethide

By the reaction of new donor molecules, bis(ethylenedithio)tetrathiafulvalenoquinone(-thioquinone)-1,3-dithiolemethides [BEDT-TTFVO (1) and BEDT-TTFVS (2)] with FeX3 (X = Cl, Br) in CS2/CH3CN, 1:1 salts of 1 or 2 with an FeX4- ion (1.FeX4 and 2.FeX4) were obtained as black needle crystals. Their crystal structures are very similar to each other, in which the donor molecules are strongly dimerized and the dimers construct a one-dimensional uniform chain along the a axis, while the FeX4- ions are located at an open space surrounded by the neighboring donor molecules and also construct a one-dimensional uniform chain along the a axis. There are close contacts between the donor molecules and the FeX4- ions and significant differences in the contact distances among the four salts. All of the salts are semiconductors with room-temperature electrical conductivities of 10-4-10-2 S cm-1. The Fe(III) d spins of the FeX4- ions are subject to dominant ferromagnetic interaction through the participation of one of the singlet pi spins to form a short-range ferromagnetic d-spin chain. Such neighboring chains interact antiferromagnetically with each other through the singlet pi spins and are ordered at 1.0, 2.4, and 0.8 K for 1.FeCl4, 1.FeBr4, and 2.FeCl4, respectively. On the other hand, the antiferromagnetic ordering occurred with some canted angle at 1.9 K to leave a small magnetization for 2.FeBr4.     

Square-planar N2S2NiII complexes with an extended pi-conjugated system

The reaction of a mixture of 2-(1-naphthyl)benzothiazoline (HL1) and 2,6-diphenylbenzo[1,2-d:4,5-d']bisthiazoline (H3L2) with nickel(II) acetate tetrahydrate yielded three kinds of square-planar nickel(II) complexes: one nickel(II) complex with innocent ligands ([Ni(L1)2] (1c)) and two nickel(II) complexes with non-innocent ligands ([Ni(L1-L1)] (1a) and [Ni(L1-L2)] (1b)). The complex 1c has two bidentate-N,S ligands, which are formed via ring opening of HL1. On the other hand, the two complexes 1a and 1b contain a tetradentate-N2S2 ligand, which is created via ring opening of HL1 and H3L2, followed by bond formation between imino carbon atoms. Complexes 1a and 1b show very intense absorptions in the near-infrared (NIR) region, characteristic of square-planar complexes with non-innocent ligands. The third nickel(II) complex having a non-innocent tetradentate-N2S2 ligand ([Ni(L2-L2)] (2)) was prepared from H3L2 and nickel(II) acetate tetrahydrate. The electronic spectrum of 2 exhibits a very intense absorption at 981 nm (epsilon = 3.6 x 10(4) M-1 cm-1), which is significantly red-shifted compared with those of 1a (837 nm and 4.4 x 10(4) M-1 cm-1) and 1b (885 nm and 4.5 x 10(4) M-1 cm-1), indicating the presence of an extended pi delocalization. The reaction of 2,6-bis(3,5-dichlorophenyl)benzo[1,2-d:4,5-d']bisthiazoline (H3L3) with nickel(II) acetate tetrahydrate also led to the formation of a nickel(II) complex with a non-innocent ligand ([Ni(L3-L3)] (3)). While complex 3 is analogous to 2, its electrical conductivity is much higher than that of 2. The molecular structures of 1b, 1c, 2, and 3 were determined by X-ray crystallography.     

Reaction of the Mo3S4 cluster with dimethylacetylenedicarboxylate: an ESR-active cluster and an organometallic cluster formed by alpha,beta-conjugate addition

A seven-electron cluster [Mo3(mu3-S){mu3-SC(CO(2)CH(3))=C(CO(2)CH(3))S}{mu-SC(CO(2)CH(3))=CH(CO(2)CH(3))}(dtp)3(mu-OAc)] [2, S2P(OC(2)H(5))2-; dtp = diethyldithiophosphate] and an organometallic cluster [Mo3(mu3-S){mu3-SC(CO(2)CH(3))=C(CO(2)CH(3))S}{mu-SC(CO(2)CH(3))CH(OCH(3))(CO2)}(dtp)2(CH(3)OH)(mu-OAc)](Mo-C) (3) were obtained by reaction in methanol of the sulfur-bridged trinuclear complex [Mo3(mu3-S)(mu-S)3(dtp)3(CH(3)CN)(mu-OAc)] (1) with dimethylacetylenedicarboxylate (DMAD). The X-ray structures of 2 and 3 revealed the adduct formation of two DMAD molecules to the respective Mo(3)S(4) cores. 2 is paramagnetic and obeys the Curie-Weiss law: the mu(eff) value at 300 K is 1.90 muB. The electron spin resonance signal was observed at 173 K. The density functional theory calculation of 2 demonstrated that the main components of the singly occupied molecular orbitals of alpha and beta spins are Mo d electrons and the main components of lowest unoccupied molecular orbitals are of Mo and the olefin moiety with one C-S bond. A one-electron reversible oxidation process of 2 was observed at E1/2 = -0.11 V vs Fc/Fc+. The electronic spectrum of 2 has a peak at 468 nm (epsilon = 2170 M(-1) cm(-1)) and shoulders at 640 (918) and 797 (605) nm, and 3 has shoulders at 441 (1740) and 578 (625) nm and a distinct peak at 840 (467) nm. An intermediate [Mo3(mu3-S){mu3-SC(CO(2)CH(3))=C(CO(2)CH(3))S}{mu-SC(CO(2)CH(3))=CH(CO(2)CH(3))}(dtp)3(mu-OAc)]+ (4) is tentatively suggested: a one-electron reduction of 4 gives 2, and a nucleophilic conjugate addition of CH(3)O- to the alpha,beta-unsaturated carbonyl group of 4 gives 3.     

Hybrid molecular material exhibiting single-molecule magnet behavior and molecular conductivity

Two unique materials based on Mn4 single-molecule magnet (SMM) clusters (ST=9) and integer or non-integer average valent platinum maleonitriledithiolate (mnt2-) complexes, [{MnII2MnIII2(hmp)6(MeCN)2}{Pt(mnt)2}2][Pt(mnt)2]2.2MeCN (1) and [{MnII2MnIII2(hmp)6(MeCN)2}{Pt(mnt)2}4][Pt(mnt)2]2 (2), were synthesized by the material diffusion method and electrochemical oxidation, respectively (hmp-=2-hydroxymethylpyridinate). 1 and 2 are comprised of four and six [Pt(mnt)2]n- units, respectively, in addition to a common MnII2MnIII2 double-cuboidal unit, [MnII2MnIII2(hmp)6(MeCN)2]4+ (hereinafter [Mn4]4+). Among the [Pt(mnt)2]n- units, two units in 1 and four units in 2 are coordinated with the [Mn4]4+ unit, forming a 1D chain of {-[Mn4]-[Pt(mnt)2]2-} for 1 and a discrete subunit of {[Pt(mnt)2]2-[Mn4]-[Pt(mnt)2]2} for 2. The other two [Pt(mnt)2]n- units, occupying void space of the packing, form a stacking column with the coordinating [Pt(mnt)2]n- units, finally constructing hybrid frames of aggregates consisting of [Mn4]4+ units and [Pt(mnt)2]n- units. Electronic conductivity measurements revealed that 1 is an insulator and 2 is a semiconductor with sigma=0.22 S.cm(-1) at room temperature and an activation energy of 136 meV. Detailed magnetic measurements proved that the [Mn4]4+ units in 1 and 2 behave as SMMs with an ST=9 ground state at low temperatures. There is no significant interaction between [Mn4]4+ units and [Pt(mnt)2]n- units, but interactions between localized spins of [Pt(mnt)2]n- were detected even in 2 at low temperatures where the conductivity is electronically insulated. 2 is the first example of a hybridized material exhibiting SMM behavior and electronic conductivity.     

Sequential injection chemiluminescence immunoassay for nonionic surfactants by using magnetic microbeads

A rapid and sensitive immunoassay based on a sequential injection analysis (SIA) using magnetic microbeads for the determination of alkylphenol polyethoxylates (APnEOs) is described. An SIA system was constructed from a syringe pump, a switching valve, a flow-through type immunoreaction cell equipped with a photon counting unit and a neodymium magnet. Magnetic beads, to which an anti-APnEOs monoclonal antibody was immobilized, were used as a solid support in an immunoassay. The introduction, trapping and release of the magnetic beads in and from the immunoreaction cell were controlled by means of a neodymium magnet and adjusting the flow of a carrier solution. The immunoassay was based on an indirect competitive immunoreaction of an anti-APnEOs monoclonal antibody immobilized on the magnetic beads with a sample APnEOs and a horseradish peroxidase (HRP)-labeled APnEOs in the same sample solution, and was based on the subsequent chemiluminscence reaction of HRP on the magnetic microbeads with a luminol solution containing hydrogen peroxide and p-iodophenol. The anti-APnEOs antibody was immobilized on the magnetic microbeads by coupling the antibody with the magnetic beads after activation of a carboxylate moiety on the surface of the magnetic beads that had been coated with a polylactic acid film. The antibody immobilized magnetic beads were introduced in the immunoreaction cell and trapped in it by the neodymium magnet, which was equipped beneath the immunoreaction cell. An APnEOs sample solution containing the HRP-labeled APnEOs at a constant concentration, and a luminol solution containing hydrogen peroxide and p-iodophenol were sequentially introduced into the immunoreaction cell, according to an SIA programmed sequence. Chemiluminescence emission was monitored by means of a photon counting unit located at the upper side of the immunoreaction cell by collecting the emitted light with a lens. A typical sigmoidal calibration curve was obtained, when the logarithm of the concentration of APnEOs was plotted against the chemiluminescence intensity as the number of photons in 100 ms using standard APnEOs sample solutions at various concentrations (0–1000 ppb) under optimum conditions. The lower detection limit defined as IC₈₀ is ca 10 ppb. The time required for analysis is less than 15 min per a sample. The present method was successfully applied to the determination of APnEOs in river water.     

Physicochemical characterization of tamoxifen citrate pseudopolymorphs, methanolate and ethanolate

Two novel pseudopolymorphs, methanolate and ethanolate of tamoxifen [(Z)-2-[4-(1,2-diphenyl-1-butenyl)phenoxy]-N,N-dimethylethylamine]citrate, were prepared in addition to forms A and B reported previously. Their crystalline forms were identified and characterized by powder and single crystal X-ray diffractometry, differential scanning calorimetry, thermogravimetric analysis, hot-stage microscopy, scanning electron microscopy and diffuse reflectance infrared Fourier-transform spectroscopy, and their physicochemical stability was also evaluated. The results of single crystal X-ray analysis and thermogravimetric analysis of methanolate and ethanolate suggested that the stoichiometry of tamoxifen citrate : methanol and tamoxifen citrate : ethanol could be composed of a 1 : 1 molecular ratio for both solvates. The results of physicochemical stability evaluations at 75 and 97% RH at 40 and 60 degrees C indicated that the metastable form A was quite stable for at least 2 months even under severe storage conditions, whereas methanolate immediately transformed to a crystalline mixture of forms A and B, and subsequently changed to the stable form B.