Recent progress of high-power negative ion beam development for fusion plasma heating

A negative-ion-based neutral beam injector (N-NBI) has been constructed for JT-60U. The N-NBI is designed to inject 500 keV, 10 MW neutral beams using two ion sources, each producing a 500 keV, 22 A D⁻ ion beam. In the preliminary experiment using one ion source, a D⁻ ion beam of 13.5 A has been successfully accelerated with an energy of 400 keV (5.4 MW) for 0.12 s at an operating pressure of 0.22 Pa. This is the highest D⁻ beam current and power in the world. Co-extracted electron current was effectively suppressed to the ratio of Ie/I_D⁻ < 1. The highest energy beam of 460 keV, 2.4 A, 0.44 s has also been obtained. To realize 1 MeV class NBI system for ITER (International Thermonuclear Experimental Reactor), demonstration of ampere class negative ion beam acceleration up to 1 MeV is an important mile stone. To achieve the mile stone, a prototype accelerator and a 1 MV, 1 A test facility called MeV Test Facility (MTF) were constructed. Up to now, an H⁻ ion beam was accelerated up to the energy of 805 keV with an acceleration drain current of 150 mA for 1 s in a five stage electrostatic multi-aperture accelerator.     

Highly chemoselective hydrogenation method using novel finely dispersed palladium catalyst on silk-fibroin: its preparation and activity

A palladium-fibroin complex (Pd/Fib) was prepared by soaking silk-fibroin in MeOH solution of Pd(OAc)₂ for 2 days (under Ar atmosphere)—4 days (under air). Pd(OAc)₂ was gradually absorbed by fibroin and the rapid reduction of fibroin conjugated Pd(OAc)₂ proceeded with MeOH as a reductant at room temperature to be the Pd(0) complex. Pd/Fib catalyzed chemoselective hydrogenation of acetylenes, olefins and azides in the presence of aromatic ketones and aldehydes, halides, N-Cbz protective groups and benzyl esters which are readily hydrogenated using Pd/C or Pd/C(en) as a catalyst.     

Synthesis of α-hydroxy-γ-butyrolactones from acrylates and 1,3-dioxolanes using N-hydroxyphthalimide (NHPI) as a key catalyst

A new route to α-hydroxy-γ-butyrolactones through three-component radical coupling of 1,3-dioxoranes, acrylates, and molecular oxygen using N-hydroxyphthalimide (NHPI) as a key catalyst has been developed. For example, the addition of 1,3-dioxarane to methyl acrylate under dioxygen by NHPI followed by catalytic hydrogenation of the resulting adduct on Pd/C afforded α-hydroxy-γ-butyrolactone in good yield. This method provides a facile approach to α-hydroxy-γ-butyrolactones, which are difficult to synthesize by conventional methods.     

Partial molar volume of proteins studied by the three-dimensional reference interaction site model theory

The three-dimensional reference interaction site model (3D-RISM) theory is applied to the analysis of hydration effects on the partial molar volume of proteins. For the native structure of some proteins, the partial molar volume is decomposed into geometric and hydration contributions using the 3D-RISM theory combined with the geometric volume calculation. The hydration contributions are correlated with the surface properties of the protein. The thermal volume, which is the volume of voids around the protein induced by the thermal fluctuation of water molecules, is directly proportional to the accessible surface area of the protein. The interaction volume, which is the contribution of electrostatic interactions between the protein and water molecules, is apparently governed by the charged atomic groups on the protein surface. The polar atomic groups do not make any contribution to the interaction volume. The volume differences between low- and high-pressure structures of lysozyme are also analyzed by the present method.     

Synthesis of dehydroxy-trans-resorcylide by intramolecular alkylation of the protected cyanohydrin using a butadiene telomer as a building block

Dehydrroxy-trans-resorcylide ($\text{15}$) was synthesized by efficient intramolecular alkylation of the protected cyanohydrin. The butadiene telomer obtained by the palladium catalyzed reaction of butadiene with acetic acid was used as a suitable block of the carbocycle.     

Laser-induced fluorescence microscopic system using an optical parametric oscillator for tunable detection in microchip analysis

A laser-induced fluorescence microscopic system based on optical parametric oscillation has been constructed as a tunable detector for microchip analysis. The detection limit of sulforhodamine B (Ex. 520 nm, Em. 570 nm) was 0.2 mol, which was approximately eight orders of magnitude better than with a conventional fluorophotometer. The system was applied to the determination of fluorescence-labeled DNA (Ex. 494 nm, Em. 519 nm) in a microchannel and the detection limit reached a single molecule. These results showed the feasibility of this system as a highly sensitive and tunable fluorescence detector for microchip analysis.     

Direct targeting of human plasma for matrix-assisted laser desorption/ionization and analysis of plasma proteins by time of flight-mass spectrometry

A method to analyze human plasma proteins without fractionation, directly applying a plasma-matrix mixture on the target plate of a matrix-assisted laser desorption/ionization-time of flight-mass spectrometer (MALDI-TOF-MS), has been described. Peaks of ionized plasma proteins could not be detected applying a mixture of an undiluted plasma sample and a matrix solution, but they appeared when the plasma was diluted before mixing with the matrix. Tenfold diluted plasma provided well-resolved protein peaks in the m/z range from 4000 to 30,000. The addition of a simple post-crystallization washing procedure performed on the target plate further improved the quality of mass spectra. We numbered 58 peaks in the range of 4-160 kDa and 32 out of which were assigned to the plasma protein species which have been reported. Especially high sensitivity and resolution were obtained in the region < 30 kDa, where multiple isoforms of apolipoprotein A-I, apolipoprotein A-II, apolipoprotein C-I, apolipoprotein C-II, apolipoprotein C-III, and transthyretin could be assigned. Various post-translational modifications are involved in the isoforms, e.g., proteolytic cleavage, glycosylation and chemical modifications. This method will become complementary with the present electrophoretic techniques, especially for the analysis of low-molecular-mass proteins.     

Multipoint recognition of catecholamines by hydrindacene-based receptors accompanied by the complexation-induced conformational switching

The molecular recognition of catecholamines by hydrindacene-based receptors 1 and 2, as well as the durene-based receptor 3, and the guest-induced conformational changes are reported. These receptors selectively bind adrenaline and dopamine salts through the guests' ammonium group and 3-hydroxyl group on the aromatic ring. In the case of adrenaline, an additional hydrogen bond with a benzylic hydroxyl group is formed. In 2 % CD3CN/CDCl3, the association constants are of the order of 10(4) M(-1), which is much larger than with guests without the 3-hydroxyl groups (10(3) M(-1)). The two amide groups of receptor 1 can rotate freely around the C(aromatic)--C(amide) bond, whereas the tert-amide in 2 changes between two stable conformations at a slow enough rate to allow detection by (1)H NMR spectroscopy. In the absence of a guest molecule, the syn-conformer is less stable than the anti-conformer. On complex formation with adrenaline, the syn-conformer becomes dominant due to an intramolecular dipole-reversal effect in addition to multipoint hydrogen bonding.     

Extraction—spectrophotometric determination of trace amounts of iron in waters with pyrogallol red and zephiramine

The simple removal of excess of co-extracted reagent in the solvent extraction of metal complex anions with a quaternary ammonium salt greatly improves the determination of iron(II) with pyrogallol red and zephiramine. The method with pyrogallol red is suitable for the determination of trace amounts of iron in natural waters. The apparent molar absorptivities of the iron(II) complex in chloroform are 7.5×10⁴ and 10.3×10⁴ 1 mol^-1 cm^-1 at 560 and 298 nm, respectively. A large excess of reagent can be added, and the ternary complex can be completely extracted over the pH range 8.5–10. Masking agents allow most interferences to be suppressed. The method is suitable for the analysis of potable, river and sea waters.     

Polyhydroxy pregnanes from Dregea volubilis

Three new polyhydroxy pregnanes named dregealol (1), volubilogenone (2) and volubilol (3) were isolated from the flowers of Dregea volubilis, and their structures elucidated from extensive 2D NMR analysis. The structure of volubilol (3) was confirmed by X-ray crystallographic studies. The known pregnane derivatives drevogenin D, iso-drevogenin P and 17α-marsdenin were also isolated.