Vibronic interactions and possible electron pairing in the photoinduced excited electronic States in molecular systems: a theoretical study

Electron-phonon interactions in the photoinduced excited electronic states in molecular systems such as phenanthrene-edge-type hydrocarbons are discussed and compared with those in the monoanions and cations. The complete phase patterns difference between the highest occupied molecular orbitals (HOMO) and the lowest unoccupied molecular orbitals (LUMO) (the atomic orbitals between two neighboring carbon atoms combined in phase (out of phase) in the HOMO are combined out of phase (in phase) in the LUMO) are the main reason that the C-C stretching modes around 1500 cm(-1) afford much larger electron-phonon coupling constants in the excited electronic states than in the charged electronic states. The frequencies of the vibrational modes that play an essential role in the electron-phonon interactions for the excited electronic states are similar to those for the monoanions and cations in phenanthrene-edge-type hydrocarbons. Possible electron pairing and Bose-Einstein condensation in the photoinduced excited electronic states as well as those in the monoanions and cations in molecular systems such as phenanthrene-edge-type hydrocarbons are also discussed.     

Recent progress of high-power negative ion beam development for fusion plasma heating

A negative-ion-based neutral beam injector (N-NBI) has been constructed for JT-60U. The N-NBI is designed to inject 500 keV, 10 MW neutral beams using two ion sources, each producing a 500 keV, 22 A D⁻ ion beam. In the preliminary experiment using one ion source, a D⁻ ion beam of 13.5 A has been successfully accelerated with an energy of 400 keV (5.4 MW) for 0.12 s at an operating pressure of 0.22 Pa. This is the highest D⁻ beam current and power in the world. Co-extracted electron current was effectively suppressed to the ratio of Ie/I_D⁻ < 1. The highest energy beam of 460 keV, 2.4 A, 0.44 s has also been obtained. To realize 1 MeV class NBI system for ITER (International Thermonuclear Experimental Reactor), demonstration of ampere class negative ion beam acceleration up to 1 MeV is an important mile stone. To achieve the mile stone, a prototype accelerator and a 1 MV, 1 A test facility called MeV Test Facility (MTF) were constructed. Up to now, an H⁻ ion beam was accelerated up to the energy of 805 keV with an acceleration drain current of 150 mA for 1 s in a five stage electrostatic multi-aperture accelerator.     

Highly chemoselective hydrogenation method using novel finely dispersed palladium catalyst on silk-fibroin: its preparation and activity

A palladium-fibroin complex (Pd/Fib) was prepared by soaking silk-fibroin in MeOH solution of Pd(OAc)₂ for 2 days (under Ar atmosphere)—4 days (under air). Pd(OAc)₂ was gradually absorbed by fibroin and the rapid reduction of fibroin conjugated Pd(OAc)₂ proceeded with MeOH as a reductant at room temperature to be the Pd(0) complex. Pd/Fib catalyzed chemoselective hydrogenation of acetylenes, olefins and azides in the presence of aromatic ketones and aldehydes, halides, N-Cbz protective groups and benzyl esters which are readily hydrogenated using Pd/C or Pd/C(en) as a catalyst.     

Formulation design of ointment base suitable for healing of lesions in treatment of bedsores

We intended to develop a desired ointment base suitable for treatment of bedsores including the proliferation of granulation and epidermis. The main bedsore bacteria detected in our hospital were S. aureus in gram-positive coccus and P. aeruginosa in gram-negative bacillus. As the macrogol ointment (MO) was found to have bactericidal effects on these bacteria, MO was adopted as the base for the objective ointment. To improve the properties of the ointment base such as regulating the humidity of the exudation and controlling the release of antibiotics formulated in the ointment, co-formulating effects of various additives to MO were evaluated. The sustained release function of the ointment base was obtained by adding hydrophilic petrolatum (HP) to MO. However, the resultant ointment was found to have a poor humidity regulating property. On the other hand, MO containing 5% of hydroxypropyl cellulose (HPC) showed both the humidity regulating and the controlled drug releasing properties. It was considered that HPC particles dispersed in the ointment could be swelled by absorbing water to form a gel network. The curd tension meter tests for the ointments prepared with the various polymers showed that the MO-HPC base, which showed the highest sustained drug releasing property, was found to have the highest hardness. This result means that HPC formulated into the base forms the most rigid gel structure to resist the erosion of the ointment and to control the drug release.     

Synthesis of α-hydroxy-γ-butyrolactones from acrylates and 1,3-dioxolanes using N-hydroxyphthalimide (NHPI) as a key catalyst

A new route to α-hydroxy-γ-butyrolactones through three-component radical coupling of 1,3-dioxoranes, acrylates, and molecular oxygen using N-hydroxyphthalimide (NHPI) as a key catalyst has been developed. For example, the addition of 1,3-dioxarane to methyl acrylate under dioxygen by NHPI followed by catalytic hydrogenation of the resulting adduct on Pd/C afforded α-hydroxy-γ-butyrolactone in good yield. This method provides a facile approach to α-hydroxy-γ-butyrolactones, which are difficult to synthesize by conventional methods.     

Raman spectroscopic studies on methane + tetrafluoromethane mixed-gas hydrate system

Raman spectra of intramolecular vibration mode for each guest species in the methane + tetrafluoromethane (CF₄) mixed-gas hydrate crystal have been measured at 291.1 K. Both of pure guest species generate the structure-I hydrate in the present pressure ranges. Isothermal phase-equilibrium curve exhibits two discontinuous points around the equilibrium methane compositions (water-free) in the gas phase of 0.3 and 0.8. At the above points, the Raman spectra of both guest molecules have been drastically changed. One of the most important findings is that the crystal of methane + tetrafluoromethane mixed-gas hydrate shows the structural phase-transition (from the structure-I to the structure-II and back to the structure-I) caused by composition changes.     

Indomethacin sustained-release suppositories containing sugar ester in polyethylene glycol base

Indomethacin (IM) sustained-release suppositories were prepared by the fusion method using sugar ester and polyethylene glycol 4000 (PEG). The suppositories were evaluated by in vitro release testing, X-ray analysis and in vivo absorption testing in rabbits. X-ray analysis showed that IM was amorphous in PEG-base suppositories. In a release test, slow-release was obtained when the sugar ester content of a suppository was 60%. The IM plasma level following the administration of the suppository was well sustained in the absorption test. The main slow-release mechanism is considered to be the release of IM from the matrix composed of sugar ester and PEG, which is represented by the Higuchi equation. A good correlation between the release test and the absorption test was obtained. It is considered that the amorphous state of IM in this type of sustained-release suppository would enhance the release and absorption of IM in the rectum of the rabbit, whose rectal fluid volume is small.     

Supramolecular triangular and linear arrays of metal-radical solids using pyrazolato-silver(I) motifs

New chelating radical ligands pzNNH, pzINH, and pzbisINH (3-pyrazolyl nitronyl nitroxide, 3-pyrazolyl imino nitroxide, and pyrazole-3,5-diyl bis(imino nitroxide), respectively) were prepared. Complexation of these ligands with Ag+ gave [Ag(pzNN)]n, [Ag(pzIN)]6, and [Ag(pzbisIN)]n containing the corresponding anionic forms of the ligands. From the X-ray crystal structure analysis, [Ag(pzIN)]6 was characterized as a dimer of almost planar triangular moieties where the pyrazolate worked as a bridge, and metal-metal bonds brought about dimerization of triangles. [Ag(pzbisIN)]n was characterized as a uniform zigzag chain consisting of pyrazolate bridges and Ag ions with a cis-Npz-Ag-Npz coordination structure. Antiferromagnetic interactions observed could be analyzed based on the structures determined for both compounds. Ferromagnetic coupling was observed in [Ag(pzNN)]n, and a polymeric structure was assumed although the crystal structure could not be determined. Novel supramolecular architectures using pyrazolate-substituted imino nitroxides have been developed, using the unique coordinative versatility of the pyrazolate derivatives     

Partial molar volume of proteins studied by the three-dimensional reference interaction site model theory

The three-dimensional reference interaction site model (3D-RISM) theory is applied to the analysis of hydration effects on the partial molar volume of proteins. For the native structure of some proteins, the partial molar volume is decomposed into geometric and hydration contributions using the 3D-RISM theory combined with the geometric volume calculation. The hydration contributions are correlated with the surface properties of the protein. The thermal volume, which is the volume of voids around the protein induced by the thermal fluctuation of water molecules, is directly proportional to the accessible surface area of the protein. The interaction volume, which is the contribution of electrostatic interactions between the protein and water molecules, is apparently governed by the charged atomic groups on the protein surface. The polar atomic groups do not make any contribution to the interaction volume. The volume differences between low- and high-pressure structures of lysozyme are also analyzed by the present method.     

Synthesis of dehydroxy-trans-resorcylide by intramolecular alkylation of the protected cyanohydrin using a butadiene telomer as a building block

Dehydrroxy-trans-resorcylide ($\text{15}$) was synthesized by efficient intramolecular alkylation of the protected cyanohydrin. The butadiene telomer obtained by the palladium catalyzed reaction of butadiene with acetic acid was used as a suitable block of the carbocycle.