Behavior of zirconium in the ZrOW(100) system at high temperature, studied by ISS, AES and work-function measurements

The behavior of zirconium atoms at the W(100) surface associated with oxygen adsorption at different sample temperatures has been studied by Auger electron spectroscopy (AES), ion scattering spectroscopy (ISS), and the relative change of the work function (Δф) measured by the onset of the secondary electron energy distribution. The results have revealed: (i) adsorption of zirconium onto the W(100) surface followed by the elevation of the sample temperature up to 1710 K in an oxygen partial pressure of 2.7 × 10⁻⁴ induces complete diffusion of zirconium atoms into the W(100) substrate; (ii) further exposure of oxygen induces co-existence of oxygen and tungsten on the surface at 1710 K, resulting in a work function of 4.37 eV; (iii) keeping the sample temperature at 1710 K, simple evacuation of the system has resulted in surface segregation of zirconium atoms to the surface to form a zirconium atomic layer on the top-most surface, reducing the work function to 2.7 eV. The results have revealed that this specific behavior of zirconium atoms at high temperature assures, with very good reproducibility, the highly stable performance and long service life of Zr---O/W(100)-emitters in practical use, even in a low vacuum of 10⁻⁶ Pa.     

TM–TE hybridization and tunable refraction in magnetophotonic crystals

In the present work we study the photonic band structure (PBS) and the polarization state of the Bloch eigenmodes of a two-dimensional magnetophotonic crystal (MPC) with square lattice formed from magneto-optically (MO) active cylinders. The refraction of light at the boundary of the MPC is analyzed. We found that both—the PBS and eigenmodes of the MPC—are most significantly altered by the MO activity in the vicinity of the degeneracies. For this case we demonstrated the possibility of an abrupt change in the propagation direction of light by the application of a magnetic field. For the Bloch wave vectors and frequencies corresponding to non-degenerate branches, the alteration of the PBS is shown to be negligible and eigenmodes almost completely coincide with linearly TE- and/or TM-polarized eigenmodes of the non-magnetic photonic crystal.     

Living anionic polymerization of N‐methoxymethyl‐N‐isopropylacrylamide: Synthesis of well‐defined poly(N‐isopropylacrylamide) having various stereoregularity

Anionic polymerization of N‐methoxymethyl‐N‐isopropylacrylamide ( 1 ) was carried out with 1,1‐diphenyl‐3‐methylpentyllithium and diphenylmethyllithium, ‐potassium, and ‐cesium in THF at ?78 °C for 2 h in the presence of Et₂Zn. The poly( 1 )s were quantitatively obtained and possessed the predicted molecular weights based on the feed molar ratios between monomer to initiators and narrow molecular weight distributions (M_w/M_n = 1.1). The living character of propagating carbanion of poly( 1 ) either at 0 or ?78 °C was confirmed by the quantitative efficiency of the sequential block copolymerization using N,N‐diethylacrylamide as a second monomer. The methoxymethyl group of the resulting poly( 1 ) was completely removed to give a well‐defined poly(N‐isopropylacrylamide), poly(NIPAM), via the acidic hydrolysis. The racemo diad contents in the poly(NIPAM)s could be widely changed from 15 to 83% by choosing the initiator systems for 1 . The poly(NIPAM)s obtained with Li⁺/Et₂Zn initiator system possessed syndiotactic‐rich configurations (r = 75–83%), while either atactic (r = 50%) or isotactic poly(NIPAM) (r = 15–22%) was generated with K⁺/Et₂Zn or Li⁺/LiCl initiator system, respectively. Atactic and syndiotactic poly(NIPAM)s (42 < r < 83%) were water‐soluble, whereas isotactic‐rich one (r < 31%) was insoluble in water. The cloud points of the aqueous solution of poly(NIPAM)s increased from 32 to 37 °C with the r‐contents. These indicated the significant effect of stereoregularity of the poly(NIPAM) on the water‐solubility and the cloud point in water © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4832–4845, 2006     

Viscoelasticity and birefringence of polyisoprene

The complex Young's modulus, E^*(ω), and the complex strain-optical coefficient, O^*(ω), which is the ratio of the birefringence to the strain, were measured for polyisoprene (PIP) over a frequency range of 1 ～ 130 Hz and a temperature range of 22 ～ ?100°C. The imaginary part of O^*, O″, was positive at low frequencies and negative at high frequencies. The real part, O′, was always positive and showed a maximum. The complicated behavior of O^* could be understood by the assumption that E^* = E_R^* + E_G^* and O^* = C_RE_R^* + C_GE_G^*, where E_R^* and E_G^* were complex quantities and C_R and C_G were constants. The C_R value, equal to the ordinary stress-optical coefficient measured in the rubbery plateau zone, was 2.0 × 10^?9 Pa^?1. The C_G value, defined as the ratio O″/E″ in the glassy zone, was ?1.1 × 10^?11 Pa^?1. The E_G^*, which was the major component of E^* in the glassy zone, showed almost the same frequency dependence as that of polystyrene and polycarbonate. The E_R^*, which was dominant in the rubbery zone, was described well by the bead-spring theory. The temperature dependence of the E_G^* was stronger than that of the E_R^*. This difference caused the breakdown of the thermorheological simplicity for E^* and O^* around the glass-to-rubber transition zone. © 1995 John Wiley & Sons, Inc.     

A note on unit and class number of real quadratic fields

Letp be an odd prime withp1 (mod 4) andQ(p) be the real quadratic field. Also let andh denote the fundamental unit and the class number of Q(p), respectively. The main purpose of this paper is to study the explicit expressions of ^h and ^2h , and to discuss the problems related to the conjecture of Ankeny-Artin-Chowla.     

Highly regio- and stereocontrolled SN2′ reactions of gem-difluorinated vinyloxiranes with monoalkylcopper reagents

Reaction of gem-difluorinated vinyloxiranes with RCu(X)Li allowed us to introduce the R group regioselectively at the fluorine-attached terminal carbon atom in an S_N2′ manner to afford (E)-allylic alcohols exclusively, while homoallylic alcohols with anti stereochemical relationship were found to be obtained selectively from higher-ordered cuprates derived from CuCl and RMgBr in a ratio of 1:3.     

Fluorescence spectra,fluorescence quantum yields and fluorescence lifetimes of polymers having trans-1,2-dicarbazolylyclobutane or carbazolyl group

Quantum yields, lifetimes and shapes of fluorescence from polymers containing the trans-1,2-dicarbazolylcyclobutane (DCZB) or carbazolyl structures were studied in N,N-dimethylformamide. No sandwich-type excimer formation was observed for DCZB polymers. The so-called second excimer observed in poly(9-vinylcarbazole) might also be produced in poly(9-ethyl-3-vinylcarbazole).     

Simple and rapid spectrophotometric determination of iron after preconcentration as its 1,10-phenanthroline complex on the natural polymer "chitin"

Preconcentration by collection of metal complexes on chitin has been applied to the spectrophotometric determination of iron in water. The iron is collected as its 1,10-phenanthroline (phen) complex on a column of chitin in the presence of tetraphenylborate as counter-ion. The iron(II)-phen complex retained on the chitin is eluted with an acetone-1M acetic acid mixture (8:2 v/v), and the absorbance of the eluate is measured at 512 nm. Beer's law is obeyed over the concentration range 1.1-11.2 mug of iron in 10 ml of eluate. In the presence of EDTA as masking agent, Ca, Mg, Al, Mn, Zn, Cd and Pb do not interfere in concentrations up to 100 times that of iron(II) and Co, Ni and Cu do not interfere in concentrations up to 20 times that of iron(II). Common inorganic anions do not interfere in concentrations up to 10,000 times that of iron(II). The proposed method has been applied to determination of iron in tap water.