Highly chemoselective hydrogenation method using novel finely dispersed palladium catalyst on silk-fibroin: its preparation and activity

A palladium-fibroin complex (Pd/Fib) was prepared by soaking silk-fibroin in MeOH solution of Pd(OAc)₂ for 2 days (under Ar atmosphere)—4 days (under air). Pd(OAc)₂ was gradually absorbed by fibroin and the rapid reduction of fibroin conjugated Pd(OAc)₂ proceeded with MeOH as a reductant at room temperature to be the Pd(0) complex. Pd/Fib catalyzed chemoselective hydrogenation of acetylenes, olefins and azides in the presence of aromatic ketones and aldehydes, halides, N-Cbz protective groups and benzyl esters which are readily hydrogenated using Pd/C or Pd/C(en) as a catalyst.     

On the selection of the optimal plasticizer for calix[n]arene-based ion-selective electrodes: Possible correlation between the ion selectivity and the ‘softness’ of the plasticizer

A criterion for the selection of a suitable plasticizer for calix[n]arene-based ion-selective electrodes is discussed. The cation selectivity of plasticized membranes without the ligand was first measured as a reference. The membranes can be roughly classified into two groups. The first group shows cation selectivity in the order Cs⁺+>K⁺>Na⁺>Li⁺. The membranes in the second group are made of phosphorus plasticizers, which show a selectivity in the reverse order. The plasticizers in the first group featured a linear relationship between the dipole moment of the plasticizer (calculated by a PM3 method) and the ratio of cesium selectivity to lithium selectivity. The linear relationship supports the view that the polar membrane which includes a soft plasticizer with a large dipole moment shows selectivity for Cs⁺, whereas the nonpolar membrane including the soft plasticizer with the small dipole moment shows much lower selectivity for Cs⁺. Next, 2-fluorphenyl-2-nitrophenyl ether (FPNPE) which showed the highest Cs⁺ selectivity and tris(2-ethylhexyl)phosphate (TEHP) which showed the highest Li⁺ selectivity were mixed in an appropriate ratio to make membranes with a different affinity for hard ions. The metal selectivities of several crown-based and calixarene-based ionophores were examined in these membranes. Although a few exceptions exist, the polar soft membrane is favorable when the interfering metal ion is hard, whereas the hard membrane is favorable when the interfering metal ion is soft.     

Effect of mono-CDNP substitution of lysine residues on the redox reaction of cytochrome c electrostatically adsorbed on a mercaptoheptanoic acid modified Au(111) surface

The effect of charge-inverting modification of single surface lysine residue on the electron transfer (ET) reaction of horse heart cytochrome c (cyt c) is examined for 12 different types of mono-4-chloro-2,5-dinitrobenzoic acid substituted cyt c (mCDNPc) adsorbed on a Au(111) electrode modified with a self-assembled monolayer (SAM) of 7-mercapto-heptanoic acid (MHA). A negative shift in the redox potential by 10-35 mV as compared to that of native cyt c and a monolayer coverage in the range of 13-17 pmol cm(-2) are observed for electroactive mCDNPc's. The magnitude of the decrease in the ET rate constant (k(et)) of mCDNPc's compared with that of native cyt c depends on the position of the CDNP substitution. For mCDNPc's in which the modified lysine residue is outside of the interaction domain of cyt c with the SAM, the ratio of the k(et) of mCDNPc to that of native cyt c is correlated to the change in the dipole moment vector of cyt c due to the CDNP modification. This correlation suggests that the dipole moment of cyt c determines its orientation of adsorption on the SAM of MHA and significantly affects the rate of the ET. The CDNP modification of lysine residues at the interaction domain significantly decreases the rate, demonstrating the importance of the local charge environment in determining the rate of ET.     

Highly regio- and stereoselective hydrometallation reactions of fluorine-containing internal alkynes: Novel approaches to fluoroalkylated alkenes

Hydroalumination, hydrocupration, and hydroboration reactions of various fluorine-containing alkynes were investigated. The alkyne reacted smoothly with 2.0 equiv. of Red-Al at −78 °C to give the hydroaluminated adduct in a highly regio- and stereoselective manner, which was treated with iodine, the corresponding vinyliodide being produced in moderate yield. Hydrocupration of the alkynes also took place, but the resulting vinylmetal reacted with various electrophiles sluggishly. In sharp contrast, the reaction with dicyclohexylborane proceeded smoothly to afford the cis-addition products preferentially, which were subjected to Suzuki-Miyaura cross-coupling reaction, leading to trisubstituted alkenes in high yields.     

Synthesis of α-hydroxy-γ-butyrolactones from acrylates and 1,3-dioxolanes using N-hydroxyphthalimide (NHPI) as a key catalyst

A new route to α-hydroxy-γ-butyrolactones through three-component radical coupling of 1,3-dioxoranes, acrylates, and molecular oxygen using N-hydroxyphthalimide (NHPI) as a key catalyst has been developed. For example, the addition of 1,3-dioxarane to methyl acrylate under dioxygen by NHPI followed by catalytic hydrogenation of the resulting adduct on Pd/C afforded α-hydroxy-γ-butyrolactone in good yield. This method provides a facile approach to α-hydroxy-γ-butyrolactones, which are difficult to synthesize by conventional methods.     

Association behavior of a nitrilotriacetic-acid-modified dye in a poly(vinyl alcohol) film containing Ni(II)-adsorbed gold nanoparticles.

The association behavior of the dyes 5(6)-carboxyfluorescein and nitrilotriacetic acid (NTA)-modified 5(6)-carboxyfluorescein (F-NTA) in a poly(vinyl alcohol) (PVA) film and in a PVA film containing metal nanoparticles is investigated. Well-dispersed gold nanoparticles (AuNps) and Ni(II)-adsorbed AuNps are formed in the PVA film using in situ photochemical fabrication method. 5(6)-carboxyfluorescein and F-NTA are doped into the films. The F-NTA forms an H-aggregate in the PVA film containing Ni(II)-adsorbed AuNps. It is suggested that the interaction between NTA and Ni(II) adsorbed on the AuNps promotes the formation of the H-aggregate.     

Raman spectroscopic studies on methane + tetrafluoromethane mixed-gas hydrate system

Raman spectra of intramolecular vibration mode for each guest species in the methane + tetrafluoromethane (CF₄) mixed-gas hydrate crystal have been measured at 291.1 K. Both of pure guest species generate the structure-I hydrate in the present pressure ranges. Isothermal phase-equilibrium curve exhibits two discontinuous points around the equilibrium methane compositions (water-free) in the gas phase of 0.3 and 0.8. At the above points, the Raman spectra of both guest molecules have been drastically changed. One of the most important findings is that the crystal of methane + tetrafluoromethane mixed-gas hydrate shows the structural phase-transition (from the structure-I to the structure-II and back to the structure-I) caused by composition changes.     

Preparation of monodisperse SiO2 nanoparticles by membrane emulsification using ideally ordered anodic porous alumina

Monodisperse SiO2 particles of nanometer dimensions were fabricated by membrane emulsification using ideally ordered anodic porous alumina. For the preparation of monodisperse emulsion droplets, the dispersed phase was pressed through a porous alumina membrane into the continuous phase. After solidification treatment of the emulsion droplets, prepared spherical SiO2 nanoparticles with uniform sizes were obtained. From scanning electron microscope observation of the obtained particles, it was confirmed that the size distribution of SiO2 nanoparticles is relatively narrow.     

Supramolecular triangular and linear arrays of metal-radical solids using pyrazolato-silver(I) motifs

New chelating radical ligands pzNNH, pzINH, and pzbisINH (3-pyrazolyl nitronyl nitroxide, 3-pyrazolyl imino nitroxide, and pyrazole-3,5-diyl bis(imino nitroxide), respectively) were prepared. Complexation of these ligands with Ag+ gave [Ag(pzNN)]n, [Ag(pzIN)]6, and [Ag(pzbisIN)]n containing the corresponding anionic forms of the ligands. From the X-ray crystal structure analysis, [Ag(pzIN)]6 was characterized as a dimer of almost planar triangular moieties where the pyrazolate worked as a bridge, and metal-metal bonds brought about dimerization of triangles. [Ag(pzbisIN)]n was characterized as a uniform zigzag chain consisting of pyrazolate bridges and Ag ions with a cis-Npz-Ag-Npz coordination structure. Antiferromagnetic interactions observed could be analyzed based on the structures determined for both compounds. Ferromagnetic coupling was observed in [Ag(pzNN)]n, and a polymeric structure was assumed although the crystal structure could not be determined. Novel supramolecular architectures using pyrazolate-substituted imino nitroxides have been developed, using the unique coordinative versatility of the pyrazolate derivatives     

Improvement of chemical analysis of antibiotics. X. Determination of eight tetracyclines using thin-layer and high-performance liquid chromatography

Analytical methods for eight tetracyclines (TCs) were established using silica gel high-performance thin-layer chromatography (HPTLC), reversed-phase thin-layer chromatography (RP-TLC) and high-performance liquid chromatography (HPLC). Good separations of eight TCs were obtained using chloroform-methanol-5% disodium ethylenediaminetetraacetate solution (65:20:5) (lower layer) and methanol acetonitrile 0.5 M oxalic acid solution (1:1:4) (pH 3.0) on silica gel HPTLC and C8 TLC plates, respectively. A combination of HPTLC and RP-TLC made possible the identification of the eight TCs. Each calibration graph was linear between 0.1 and 1.0 microgram using UV densitometry except for rolitetracycline. For detection reagents, the diazonium salts including Fast Violet B gave variously coloured spots with the eight TCs and good sensitivities were obtained except with minocycline. In HPLC, the simultaneous analysis of the eight TCs on a C8 column was possible using methanol-acetonitrile-0.01 M oxalic acid solution (1:1.5:7) adjusted to pH 3.0 as the mobile phase. A linear relationship was obtained between 1.0 and 10 ng using the usual sample preparation except for rolitetracycline. The direct determination of rolitetracycline was possible using tetrahydrofuran, dimethyl sulphoxide and the mobile phase as solvents for preparation of the sample. For the determination of residual rolitetracycline, it was effective to measure the amount of rolitetracycline as tetracycline by HPLC, HPTLC and RP-TLC after conversion of rolitetracycline to tetracycline by incubating for 5 min in methanol at 50 degrees C.