A study of embolizing materials for chemo-embolization therapy of hepatocellular carcinoma: embolic effect of cisplatin albumin microspheres using chitin and chitosan in dogs, and changes of cisplatin content in blood and tissue.

Hepatic artery of dogs was embolized with cisplatin (CDDP) albumin microspheres containing chitin and chitosan to investigate the in vivo CDDP release kinetics from CDDP albumin microspheres, the CDDP cumulative characteristics in the liver, and the influence of microsphere administration on hepatic tissue. Results showed that changes in blood CDDP content were dependent on CDDP albumin microsphere type and that release kinetics were better sustained when chitin was added to the microspheres or when the microspheres were treated with chitosan. In particular, the administration of CDDP in the chitin-containing CDDP chitosan albumin microspheres showed a blood CDDP content of approximately 0.26 micrograms Pt/ml 14 d after administration. The administration of chitin-containing or chitosan treated CDDP microspheres showed a CDDP content in the hepatic tissue of 0.14 to 0.23 micrograms Pt/g 28 d after administration. They also showed better control of CDDP release than those without chitin or chitosan treatment. No CDDP influence on hepatic tissue was observed. We conclude that, even in vivo, chitin and chitosan are effective embolic materials.     

Thermal latency of novel chelating borate catalysts as latent catalysts for epoxy–phenolic resins

Novel quaternary ammonium bis(2‐oxybenzoyloxy)borate salts ( 1a – 1c ) or quaternary ammonium bis(1,2‐benzenedioxy)borate salts ( 2a and 2b ) with tetra‐n‐butylammonium (TBA⁺), tetra‐n‐octylammonium (TOA⁺), or bis(triphenylphosphoranylidene)ammonium (PNP⁺) cations were synthesized as latent catalysts of epoxy/phenol–novolac resins by the complexation between boric acid and salicylic acid or catechol, followed by neutralization with quaternary ammonium hydroxide. Polyaddition reactions of diglycidyl ether of bisphenol A (DGEBA) and 4,4′‐bisphenol F (44BPF) or bisphenol F (BPF‐D) with the ammonium borates were investigated as model reactions of epoxy/phenol–novolac resin systems with respect to the thermal latency and storage stability of the catalyst. The polyaddition of DGEBA/44BPF with 1a – 1c in diglyme at 150 °C for 6 h proceeded up to 85–96% conversions and gave polymers with number‐average molecular weights of 4180–10,500, whereas the polyaddition at 80 °C for 6 h gave less than 8% conversions. However, the polyaddition with 2a containing TBA⁺ cation proceeded to only a 32% conversion at 150 °C for 6 h in diglyme and to a 64% conversion even at 180 °C for 6 h in triglyme and only gave low molecular weight oligomers, and no reaction proceeded in the polyaddition at 80 °C. However, polyaddition with 2b containing PNP⁺ cation proceeded up to a 96% conversion at 150 °C for 6 h in diglyme and gave a higher molecular weight polymer with a number‐average molecular weight of 8050, whereas the polyaddition at 80 °C for 6 h gave only a 5% conversion. The catalytic activity of ammonium borates 1a – 1c and 2a and 2b depended on the borate anion structure: 1a and 1c with bis(2‐oxybenzoyloxy)borate anion revealed higher activity than 2a and 2b with bis(1,2‐benzenedioxy)borate anion, respectively. In comparison with tetra‐n‐butylammonium bromide (TBAB) as a conventional ammonium salt or tetra‐n‐butylammonium tetrakis(benzoyloxy)borate (TBA‐TBB), 1a – 1c and 2b revealed better thermal latency. The catalytic activity of ammonium borates also depended on the bulkiness of the ammonium cation, and the order of activity was 1c (PNP⁺) > 1b (TOA⁺) ≧ 1a (TBA⁺) and 2b (PNP⁺) > 2a (TBA⁺). The storage stability of DGEBA/BPF‐D with the ammonium borate catalysts 1a – 1c and 2a and 2b in bulk at 40 °C was much better than that with TBAB and TBA‐TBB. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2702–2716, 2002     

Synthesis and properties of polydiene and polypentenamer having formyl or hydroxymethyl groups and their photosensitive derivatives

cis-1,4-Polybutadiene and polypentenamer having pendant functional groups such as formyl, aldoxime, hydroxymethyl, or cinnamoyloxymethyl groups have been prepared, and some of their properties were investigated in terms of structural effect on physical properties of these polymers. cis-1, 4-Polybutadiene and polypentenamer having a different content of formyl group were prepared by the hydroformylation reaction with rhodium catalyst under mild conditions. The pendant formyl group was reduced to a hydroxymethyl group by using various reducing agents such as sodium borohydride or sodium trimethoxyborohydride which were effective to avoid a crosslinking reaction among the formyl groups. Glass transition temperature of polypentenamer having hydroxymethyl groups increased with increasing the content of the hydroxymethyl groups in the polymer. Cinnamoyl group was introduced into the polypentenamer having hydroxymethyl groups by reacting with cinnamoyl chloride so as to prepare a photosensitive rubber. The relationships between the photosensitivity of the cinnamoylated polypentenamer and the mobility of polymer main chains have been elucidated. A linear relationship between the photodimerization rate constant and the difference between ultraviolet (UV) irradiation temperature and the glass transition temperature of the polymer was found. It has become apparent that the photosensitivity of cinnamoylated polypentenamer can be estimated by the glass transition temperature of the original polymer, UV irradiation temperature, activation energy of the dimerization, and γ, which is a coefficient of the relationship between the photosensitive group concentration and the glass transition temperature of the polymer.     

Nonlinear optical property calculations by the long-range-corrected coupled-perturbed Kohn-Sham method

The long-range correction (LC) scheme for the exchange functional of density-functional theory (DFT) was combined with the coupled-perturbed Kohn-Sham (CPKS) method to calculate nonlinear optical response properties. By using this LC-CPKS method, we calculated the hyperpolarizabilities of typical molecules and the dipole moments, polarizabilities, and hyperpolarizabilities of push-pull pi-conjugated systems: p-nitroaniline, 4-amino-4'-nitrostilbene, and alpha,omega-nitroaminopolyenes. It was found that the LC scheme clearly improved the calculation of these optical properties for all of these systems, which have been significantly overestimated by conventional DFTs. We therefore concluded that the long-range exchange interaction played an important role in calculating the optical properties using the DFT formalism.     

Determination of molecular weight of native proteins by polyacrylamide gradient gel electrophoresis

An improved method for the estimation of molecular weights of native proteins by polyacrylamide gel electrophoresis, in 9 cm x 9 cm x 0.05 mm 4-20% T fabric reinforced gradient gels, is described. Plotting the logarithm of the relative mobilities of proteins versus gel concentrations produces lines whose slopes are related to molecular weights.     

A theoretical (DFT, GIAO-NMR, NICS) study of the carbocations and oxidation dications from azulenes, homoazulene, benzazulenes, benzohomoazulenes, and the isomeric azulenoazulenes

Protonation of parent azulene (1), homoazulene (8), representative isomeric benzazulenes (9, 9A, and 9B), and benzohomoazulenes (10, 10A, and 10B) as well as the mono- and diprotonation of isomeric azulenoazulenes (11-16) were studied by DFT at the B3LYP/6-31G(d) level. The most likely carbocations were identified based on relative protonation energies. For comparison, complete experimental 13C NMR data were obtained for parent azulenium ion 1H+ and guaiazulenium ion 2H+ in TFA. The oxidation dications derived from benzazulenes (9, 9A, and 9B), benzohomoazulenes (10, 10A, and 10B) and azulenoazulenes (11, 16) were also investigated. For azulenoazulene dications the singlet and triplet states are both minima, but except for 11(2+) and 13(2+), the triplet states are higher in energy. Structural/geometrical changes in the carbocations were examined. GIAO-NMR, NPA charges (and changes in charges), and NICS (and delta NICS) were employed to compute the NMR chemical shifts (delta delta 13C values) in order to derive charge delocalization maps and to gauge relative aromaticitylantiaromaticity in the energetically most favored carbocations and oxidation dications. The emerging trends are discussed and compared. Creation of tropylium or homotropylium entities in the carbocations (monoprotonated) and carbodications (diprotonated) is identified as an important driving force governing the protonation outcomes. Consideration of the AM1-derived delta delta Hf values (and the DFT-derived delta delta G values) suggests that the two-electron oxidation of azulenoazulenes should be experimentally feasible. Given their antiaromatic (paratropic) character, azulenoazulene dications represent interesting targets for NMR study. GIAO-derived charge delocalization mapping allows the most likely sites for nucleophilic attack on the dications to be identified.     

NMR studies on the stereospecific polymerization of methyl vinyl ether. Part I. Polymerization by metal halides: Penultimate effect

Methyl vinyl ether (MVE) was polymerized under various conditions by BF₃·O(C₂H₅)₂ and SnCl₄·CCl₃CO₂H catalysts. The effect of polymerization conditions on the steric structure of poly(methyl vinyl ether) (PMVE) was studied by NMR spectra. It was found that the triad isotacticity of PMVE decreased and the syndiotacticity and heterotacticity increased with increasing polarity of the solvent and increasing polymerization temperature. This result coincided with the qualitative conclusion estimated from softening point and infrared spectra. However, the variation of tacticity by the change of the polarity of a solvent was not so large as expected. There was no large difference between the behavior of BF₃·O(C₂H₅)₂ and SnCl₄·CCl₃CO₂H as catalysts. From the relation between the difference of free energy of monomer addition due to the steric structure of the polymer and the polymerization temperature, it was concluded that the penultimate effect really existed and was due to only the difference in enthalpy in the MVE–BF₃. O(C₂H₅)₂ or MVE–SnCl₄·CCl₃CO₂H systems. The penultimate effect was not greatly changed by the polymerization conditions in these systems.     

A new class of C1-symmetric monosulfoximine ligands for enantioselective hetero Diels-Alder reactions

Quinoline-based C1-symmetric sulfoximines have been used as chiral ligands in copper-catalyzed asymmetric hetero Diels-Alder reactions leading to cycloadducts with up to 96% ee.     

Synthesis and NMR studies of (13)C-labeled vitamin D metabolites

Isotope-labeled drug molecules may be useful for probing by NMR spectroscopy the conformation of ligand associated with biological hosts such as membranes and proteins. Triple-labeled [7,9,19-(13)C(3)]-vitamin D(3) (56), its 25-hydroxylated and 1 alpha,25-dihydroxylated metabolites (58 and 68, respectively), and other labeled materials have been synthesized via coupling of [9-(13)C]-Grundmann's ketone 39 or its protected 25-hydroxy derivative 43 with labeled A ring enyne fragments 25 or 26. The labeled CD-ring fragment 39 was prepared by a sequence involving Grignard addition of [(13)C]-methylmagnesium iodide to Grundmann's enone 28, oxidative cleavage, functional group modifications leading to seco-iodide 38, and finally a kinetic enolate S(N)2 cycloalkylation. The C-7,19 double labeling of the A-ring enyne was achieved by the Corey-Fuchs/Wittig processes on keto aldehyde 11. By employing these labeled fragments in the Wilson-Mazur route, the C-7,9,19 triple-(13)C-labeled metabolites 56, 58, and 68 as well as other (13)C-labeled metabolites have been prepared. In an initial NMR investigation of one of the labeled metabolites prepared in this study, namely [7,9,19-(13)C(3)]-25-hydroxyvitamin D(3) (58), the three (13)C-labeled carbons of the otherwise water insoluble steroid could be clearly detected by (13)C NMR analysis at 0.1 mM in a mixture of CD(3)OD/D(2)O (60/40) or in aqueous dimethylcyclodextrin solution and at 2 mM in 20 mM sodium dodecyl sulfate (SDS) aqueous micellar solution. In the SDS micellar solution, a double half-filter NOESY experiment revealed that the distance between the H(19Z) and H(7) protons is significantly shorter than that of the corresponding distance calculated from the solid state (X-ray) structure of the free ligand. The NMR data in micelles reveals that 58 exists essentially completely in the alpha-conformer with the 3 beta-hydroxyl equatorially oriented, just as in the solid state. The shortened distance (H(19Z))-H(7)) in micellar solutions as compared to that in the solid state is most easily rationalized on the basis that the 5(10)-torsion angle in 58 is decreased in micellar solutions as compared to that in the solid state.     

Rapid racemization of chiral non-racemic sec-alcohols catalyzed by (η-C5(CH3)5)Ru complexes bearing tertiary phosphine-primary amine chelate ligands

A ternary catalyst system of Cp*RuCl(cod)-2-diphenylphosphinoethylamine-KOt-Bu (Cp*=η⁵-C₅(CH₃)₅, cod=1,5-cyclooctadiene) causes rapid racemization of chiral non-racemic sec-alcohols, which results from the reversible hydrogen transfer between sec-alcohols and ketones. Both tertiary phosphine and primary amine functionalities in the ligand are responsible for the high rate.