An electrically conductive metallocycle: densely packed molecular hexagons with π-stacked radicals

Electrical conduction among metallocycles has been unexplored because of the difficulty in creating electronic transport pathways. In this work, we present an electrocrystallization strategy for synthesizing an intrinsically electron-conductive metallocycle, [Ni₆(NDI-Hpz)₆(dma)₁₂(NO₃)₆]·5DMA·nH₂O (PMC-hexagon) (NDI-Hpz = N,N′-di(1H-pyrazol-4-yl)-1,4,5,8-naphthalenetetracarboxdiimide). The hexagonal metallocycle units are assembled into a densely packed ABCABC… sequence (like the fcc geometry) to construct one-dimensional (1D) helical π-stacked columns and 1D pore channels, which were maintained under the liberation of H₂O molecules. The NDI cores were partially reduced to form radicals as charge carriers, resulting in a room-temperature conductivity of (1.2–2.1) × 10⁻⁴ S cm⁻¹ (pressed pellet), which is superior to that of most NDI-based conductors including metal–organic frameworks and organic crystals. These findings open up the use of metallocycles as building blocks for fabricating conductive porous molecular materials.

Intrinsically electron-conductive metallocycle was synthesized. π-Radicals play a key role in constructing π-stacked columns among molecular hexagons and achieving high electrical conductivity over 10⁻⁴ S cm⁻¹ in polycrystalline pellet.     

Synthesis and light‐emitting properties of carbazole‐based copolymers bearing cyano‐substituted arylenevinylene chromophore

Two arylenevinylene compounds bearing the cyano group at α‐position ( 6 ) and β‐position ( 9 ) from the dialkoxylphenylene unit were synthesized, in which the molecular termini were functionalized with 3‐bromocarbazole. The Suzuki coupling copolymerization of these compounds with 1,4‐bis[(3′‐bromocarbazole‐9′‐yl)methylene]‐2,5‐didecyloxybenzene and 9,9‐dihexylfluorene‐2,7‐bis(boronic acid) was carried out to obtain copolymers ( cp67 and cp97 ) containing the cyano‐substituted arylenevinylene fluorophore of 7 mol %. Model compounds ( 6 ′ and 9 ′) corresponding to the arylenevinylene fluorophore were also prepared. The UV spectra of copolymers resembled that of homopolymer hp with no arylenevinylene segment in both CHCl₃ solution and thin film. The emission maxima of copolymers in CHCl₃ (394 nm) agreed with that of homopolymer indicating that the emission bands originated from the carbazole‐fluorene‐carbazole segment. The emission maximum wavelength of copolymer cp67 in thin film (477 nm) indicated fluorescence from the cyano‐substituted arylenevinylene fluorophore because of the occurrence of fluorescence resonance electron transfer. In contrast, copolymer cp97 showed fluorescence at 528 nm to suggest the formation of a new emissive species such as a charge‐transfer complex (exciplex). © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 91–98, 2010     

Nine new secoiridoid glucosides from Jasminum nudiflorum

Phytochemical study of the leaves of Jasminum nudiflorum has led to the isolation of nine new secoiridoid glucosides, jasnudiflosides F-L (1-7), nudifloside D (8) and isooleoacteoside (9). The structures of these compounds were elucidated on the basis of chemical and spectroscopic evidence.     

New mu-opioid receptor agonists with phenoxyacetic acid moiety

New muq-opioid receptor (MOR) agonists containing 4-hydroxypiperidine, piperidine and piperazine moieties were synthesized and evaluated to find a peripheral opioid analgesic. Among the synthesized compounds, 12-[1-[3-(N,N-dimethylcarbamoyl)-3,3-diphenylpropyl]-4-hydroxypiperidin-4-yl]phenoxy]acetic acid (8: SS620) having phenoxyacetic acid and 4-hydroxypiperidine moieties showed the highest agonist potency on the MOR in an isolated guinea-pig ileum preparation, and it also had selectivity to the human MOR expressed in Chinese hamster ovary (CHO)-K1 cells compared with the same types of delta- and kappa-opioid receptors (DOR and KOR). In addition, compound 8 showed a 10 times more potent MOR agonist activity than loperamide. Furthermore, compound 8 showed a peripheral analgesic activity in vivo screening on rat.     

Relationship between apparent diffusion coefficient and signal intensity in endometrial and other pelvic cysts

We evaluated whether apparent diffusion coefficient (ADC) value is more useful than signal intensity for differentiating endometrial cysts from other pelvic cysts. In an in vitro study, signal intensity and diffusion coefficients were measured in whole blood phantoms in which blood oxidation was gradually increased and concentration subsequently diluted. Although both signal intensity and diffusion value were largely affected by blood concentration, diffusion value was almost independent of blood oxidation and red blood cell lysis-related diminution of magnetic nonhomogeneity, both factors greatly affecting signal intensity on T1- and T2-weighted images. In an in vivo study, differentiation between endometrial and other pelvic cysts was attempted by means of ADC values and signal ratios of cysts to muscles on T1- and T2-weighted images (T1- and T2-ratios). Endometrial cysts tended to show lower T2-ratios, higher T1-ratios, and lower ADC values than other pelvic cysts (p < 0.001). However, ADC values were not correlated with T1- and T2-ratios (p < /0.15/). The ability of ADC value to discriminate between these two groups (discriminant rate, 91.4%) was higher than that of T2-ratio (71.4%) or T1-ratio (88.6%). If combined, ADC and T1-ratio (or T2-ratio) showed higher discriminant rate (94.3%) than the combination of T1- and T2 ratios (88.6%). ADC value might be useful for evaluating the blood concentration of a cystic lesion, because diffusion value is more closely related to blood concentration and almost independent of blood oxidation and red blood cell lysis that largely affect signal intensity.     

Homogeneous ZnO Nanoparticles by Flame Spray Pyrolysis

Zinc oxide (ZnO) nanoparticles were made by flame spray pyrolysis (FSP) of zinc acrylate–methanol–acetic acid solution. The effect of solution feed rate on particle specific surface area (SSA) and crystalline size was examined. The average primary particle diameter can be controlled from 10 to 20nm by the solution feed rate. All powders were crystalline zincite. The primary particle diameter observed by transmission electron microscopy (TEM) was in agreement with the equivalent average primary particle diameter calculated from the SSA as well as with the crystalline size calculated from the X-ray diffraction (XRD) patterns for all powders, indicating that the primary particles were rather uniform in diameter and single crystals. Increasing the solution feed rate increases the flame height, and therefore coalescence and/or surface growth was enhanced, resulting in larger primary particles. Compared with ZnO nanoparticles made by other processes, the FSP-made powder exhibits some of the smallest and most homogeneous primary particles. Furthermore, the FSP-made powder has comparable BET equivalent primary particle diameter with but higher crystallinity than sol–gel derived ZnO powders.     

The Relation of Generalized Scalar-Tensor Theory with the 5D Space-Time-Matter Theory

The relationship between cosmological solutionsof five-dimensional Space-Time-Matter (STM) theory anda Generalized Scalar-Tensor (GST) theory is investigatedin which the cosmological term Lambda depends not only on a scalar field but also onits time derivative .Identification of these solutions allows us to solve forthe functional form of the cosmological term, and mayhave relevance for the early Universe.     

On Swan conductors for Brauer groups of curves over local fields

For an element of the Brauer group of a curve over a local field, we define the ``Swan conductor' of , which measures the wildness of the ramification of . We give a relation between and Swan conductors for Brauer groups of henselian discrete valuation fields defined by Kato.

     

G. Martens′ Dimension Theorem for Curves of Odd Gonality

For a smooth projective irreducible algebraic curve C of odd gonality, the maximal possible dimension of the variety of special linear systems W _d ^r (C) is d-3r by a result of M. Coppens et al. Furthermore it is known that if the maximum dimension of W(C) for a curve C of odd gonality is attained then C is of very special type of curves by the recent progress made by G. Martens. The purpose of this paper is to chase an extension of the result of G. Martens; if dim W(C)=d-3r-1 for a curve C of odd gonality for some dg-4 and r1, then C must be either a smooth plane sextic, a pentagonal curve of bounded genus or a smooth plane octic.