Cyclopropanation and carbonyl olefination utilizing 2-(Alk-1-yn-1-yl)-2-(trialkylsilyl)-1,3-dithianes via regioselective generation of titanium alkynylcarbene complexes

Cp(2)Ti[P(OEt)(3)](2)-promoted reactions of 2-(alk-1-yn-1-yl)-2-(trialkylsilyl)-1,3-dithianes (RS)(2)C(Si)CCR with terminal olefins and carbonyl compounds produced (trialkylsilylethynyl)cyclopropanes and 1-(trialkylsilyl)alk-3-en-1-ynes, respectively. These compounds were suggest to be produced via the formation of intermediary titanium alpha-(trialkylsilylethynyl)carbene complexes Cp(2)Ti=C(R)CCSi in preference to their regioisomers, alpha-(trialkylsilyl)alkynylcarbene complexes Cp(2)Ti=C(Si)CCR.     

A novel synthesis of α-hydroxy- and α,α′-dihydroxyketone from α-iodo and α,α′-diiodo ketone using photoirradiation

A novel reaction of α-iodo ketone (α-iodocycloalkanone, α-iodo-β-alkoxy ester, and α-iodoacyclicketone) with irradiation under a high-pressure mercury lamp gave the corresponding α-hydroxyketone in good yields. In the case of α,α′-diiodo ketone, α,α′-dihydroxyketone which little has been reported until now was obtained. This reaction affords a new, clean and convenient synthetic method for α-hydroxy- and α,α′-dihydroxyketone.     

Effect of omega-hydrogenation on the adsorption of fluorononanols at the hexane/water interface: pressure effect on the adsorption of fluorononanols

The interfacial tension gamma of the hexane solution of 1H,1H-perfluorononanol (FDFC(9)OH) and its omega-hydrogenated analogue, 1H,1H,9H-perfluorononanol (HDFC(9)OH), against water was measured as a function of pressure and concentration at 298.15 K in order to clarify the effect of omega-dipole on the orientation of fluorononanol molecules from the viewpoint of volume. The adsorbed films of both alcohols exhibit two kinds of phase transitions among three different states: the gaseous, expanded, and condensed states. The partial molar volume changes of adsorption - in the expanded and condensed states were evaluated and compared between the two systems. The - values of both alcohols are negative, and thus the alcohol molecules have smaller volume in the adsorbed film than in the bulk solution. Furthermore, the value was obtained through the evaluation of by the density measurement of the bulk hexane solution. It was found that the value of HDFC(9)OH is smaller than that of FDFC(9)OH in the condensed state. On the basis of three matters concerning the molecular structure of alcohols, the occupied area at the interface, and the orientation of FDFC(9)OH in the adsorbed film deduced from the earlier results of X-ray reflectivity measurement, the mean tilt angle of HDFC(9)OH from the interface normal in the condensed film was estimated to be 15 degrees . The thermodynamic estimation demonstrated here is highly valuable one to provide structure information on an adsorbed film.     

High-performance liquid chromatography of biogenic amines in the corpus cardiacum of the American cockroach, Periplaneta americana

The simultaneous determination of biogenic amines in the corpus cardiacum of the American cockroach, Periplaneta americana, was carried out using high-performance liquid chromatography with a Neurochem neurochemical analyser. Vanillic acid, dopamine, octopamine and tyramine were detected. Tyrosine and tryptophan were also detected at high levels. Octopamine levels in the corpus cardiacum were increased on injection of an acetone solution. The biological function of the biogenic amines detected is discussed.     

Synthesis and properties of the first stable silylene-isocyanide complexes

The first stable silylene-isocyanide complexes, [Tbt(Mes)SiCNAr] (5 c: Ar=Tip, 5 d: Ar=Tbt, 5 e: Ar=Mes*; Tbt=2,4,6-tris[bis(trimethylsilyl)methyl]phenyl, Mes=mesityl, Tip=2,4,6-triisopropylphenyl, Mes*=2,4,6-tri-tert-butylphenyl) were successfully synthesized by the reaction of a kinetically stabilized disilene, [Tbt(Mes)Si=Si(Mes)Tbt] (1), with bulky isocyanides, ArNC (3c-e). The spectroscopic data of 5 c-e and theoretical calculations for a model molecule indicated that 5 c-e are not classical cumulative compounds but the first stable silylene-Lewis base complexes. The reactions of 5 c-e with triethylsilane and 1,3-dienes gave the corresponding silylene adducts, and they underwent isocyanide-exchange reactions in the presence of another isocyanide at room temperature. These results indicate dissociation of complexes 5 c-e to the corresponding silylene 2 and isocyanides 3 c-e under very mild conditions. The reaction of 5 c with methanol gave the MeOH adduct 16, [Tbt(Mes)SiHC(OMe)NTip], which has a hydrogen atom on the silicon atom. This regioselectivity can be explained in terms of the contribution of zwitterionic resonance structures D and E, which have an anion on the silicon atom. This result indicates that 5 c is not a classical cumulene having Si=C double bonds that should react with methanol to give adducts bearing a methoxyl group on the silicon atom. Although the reactions of 5 c-e with electrophilic reagents such as methanol, hydrogen chloride, and methyl iodide gave the formal silylene adducts, the studies on the reaction mechanism by trapping experiments and the observation of the intermediate suggested that the reaction mainly or partially proceeds by initial nucleophilic attack of the silicon atom, as is the case in the formation of 16 in the reaction of 5 c with methanol. It was revealed that 5 c-e show the nucleophilicity of the silicon atom, most likely resulting from the contribution of the zwitterionic resonance structures D and E.     

Structures and stabilities of 3d-transition metal-benzene organometallic clusters

In the gas phase, we have successfully synthesized organometallic clusters, M_n(benzene)_m (M=3d transition metal atoms), by using a laser vaporization method. The measurements of mass spectra and ionization energies (E_i) have revealed that the organometallic clusters can take two types of structures; layered sandwich structures (m = n + 1) and metal clusters saturatedly covered with benzenes. For early transition metals of Sc, Ti, and V, only the multiple decker sandwich structure clusters were preferentially produced, in which benzene and metal atoms are alternately piled up. For late transition metals of Co and Ni, the metal clusters saturatedly surrounded by benzenes were also produced as well as the sandwich clusters. Furthermore, the E_is of M₁(benzene)₂ (M = Sc-Ni) were systematically measured and their electronic properties will be discussed.     

Tetraalkylammonium Picrates in the Dichloromethane–Water System: Ion-Pair Formation and Liquid–Liquid Distribution of Free Ions and Ion Pairs

Equilibria concerning picrates of tetraalkylammonium ions (Me₄N⁺, Et₄N⁺, Pr₄N⁺, Bu₄N⁺, Bu₃MeN⁺) in a dichloromethane−water system have been investigated at 25 ^∘C. The 1:1 ion-pair formation constants (K _IP,o ^o) in dichloromethane at infinite dilution were conductometrically determined. The distribution constants (K _D ^o) of the ion pairs and the free cations between the solvents were determined by a batch-extraction method. The K _IP,o ^o value varies in the cation sequence, Bu₄N⁺ ≈ Pr₄N⁺ ≈ Et₄N⁺ < Bu₃MeN⁺ < < Me₄N⁺; this trend is explained by the electrostatic cation−anion interaction taking into account the structures of the ion pairs determined by density functional theory calculations. For the ion pairs of the symmetric R₄N⁺ cations, there is a linear positive relationship between log₁₀ K _D ^o and the number of methylene groups in the cation (N _{CH 2}). The ion pair of asymmetric Bu₃MeN⁺ has a higher distribution constant than that expected from the above log₁₀ K _D ^o versus N _{CH 2} relationship. These cation dependencies of log₁₀ K _D ^o for the ion pairs are explained theoretically by using the Hildebrand-Scatchard equation. For all the cations, the log₁₀ K _D ^o value of the free cation increases linearly with N _{CH 2}; the variation of log₁₀ K _D ^o is discussed by decomposing the distribution constant into the Born-type electrostatic contribution and the non-Born one, and attributed to the latter that is governed by the differences in the molar volumes of the cations. The cation dependencies of the ion-pair extractability and ion pairing in water are also discussed. An erratum to this article can be found at     

Synthesis of the common left-half part of pectenotoxins

The common left-half [C31-C33(OC1-C7)-C40] part of pectenotoxins has been synthesized convergently from the C31-C35, C36-C40, and C1-C7 parts. The C31-C35 part, prepared via a new route shorter than our previous route, was coupled with the C36-C40 part through reductive lithiation and addition reactions to give an adduct stereoselectively, which was converted to a cyclic acetal corresponding to the C31-C40 part. The left-half was synthesized by a three-step process including esterification of the C31-C40 part with the C1-C7 part.     

Extraction of sodium and potassium perchlorates with benzo-18-crown-6 into various organic solvents. Quantitative elucidation of anion effects on the extraction-ability and -selectivity for Na(+) and K(+)

To investigate quantitatively the anion effect on the extraction-ability and -selectivity of benzo-18-crown-6 (B18C6) for alkali metal ions, the constants for overall extraction into various diluents having low dielectric constants (K(ex)) and aqueous ion-pair formation (K(MLA)) of B18C6-sodium and potassium perchlorate 1:1:1 complexes (MLA) were determined at 25 degrees C. The K(ex) value was analyzed by the four fundamental equilibrium constants. The K(MLA) values were determined by applying our established method to this perchlorate extraction system. The K(M(B18C6)A) value of the perchlorate is much larger for K(+) than for Na(+), and is much smaller than that of the picrate. The K(M(B18C6)A) value makes a minor contribution to the magnitude of K(ex) for the perchlorate system, but a major contribution to that for the picrate one. The distribution behavior of the B18C6 1:1:1 complexes with the alkali metal perchlorates follows the regular solution theory. For the diluent with a high dipole moment, however, the 1:1:1 complexes somewhat undergo the dipole-dipole interaction. B18C6 always shows very high extraction selectivity for KClO(4) over NaClO(4), which is determined mostly by the much greater log/(log K(MLA)) value for K(+) than for Na(+). The extraction-ability and -selectivity of B18C6 for Na(+) and K(+) ions with a perchlorate ion were compared with those with a picrate ion in terms of the fundamental equilibrium constants. The K(+) extraction-selectivity of B18C6 over Na(+) for the perchlorate system is superior to that for the picrate one, which is caused largely by the greater log/(log K(K(B18C6)A))-log/(log K(Na(B18C6)A)) value for the perchlorate than for the picrate. The perchlorate system is recommended for extraction separation of K(+) from Na(+).