Hydrophobic switching nature of methylcellulose ultra-thin films: thickness and annealing effects

We have studied the thermosensitive property of methylcellulose (MC) thin films supported on Si substrate by static sessile drop contact angle measurements, and their surface properties and thin film structure by x-ray reflectivity (XRR) and atomic force microscopy (AFM) techniques. From the static sessile drop contact angle measurements, the MC thin films showed the characteristic hydrophilic-to-hydrophobic transition at ～70?°C, which is the lower critical solution temperature of the bulk solution volume phase separation transition. For films with thickness d ≤ R(g), the onset of such a transition is affected by the film thickness while very thick films, d ? R(g), yielded higher contact angles. Annealing the MC thin films with thicknesses ～200 ? (near the radius of gyration, R(g), of the polymer) below the bulk glass transition temperature (T(g) ～ 195?° C) would not change the hydrophobic switch nature of the film but annealing 'at' and above the bulk T(g) would change its surface property. From surface topography images by AFM, there were no significant changes in either the roughness or the film texture before and after annealing. With XRR data, we were able to determine that such changes in the surface properties are highly correlated to the film thickness changes after the annealing process. This study, we believe, is the first to examine the thermal annealing affects on the thermal response function of a thermoresponsive polymer and is important for researching how to tailor the hydrophobic switching property of MC thin films for future sensing applications.     

Vibrational spectroscopy studies of a pressure-induced disproportionation reaction of LaH2

The pressure-induced disproportionation reaction of LaH₂ was investigated by infrared reflection and Raman measurements at ambient temperature. The relative reflection intensity in the 4000-6000 cm⁻¹ region began to decrease significantly at a pressure of about 12 GPa and fell to 10% of the initial value at 20 GPa. Absorption peaks, which appeared around 1200 and 700 cm⁻¹ at pressures above 14 GPa, were assigned to the hydrogen vibrations at the tetrahedral and octahedral sites of the fcc metal lattice, respectively. The peak frequencies measured in the 14-30 GPa range were similar to those observed in LaH₃. These infrared results indicated insulating LaH₃ precipitated from metallic LaH₂. Above 20 GPa, a Raman peak related to the hydrogen vibration in the octahedral sites appeared around 700 cm⁻¹, and was likely due to lattice distortion. The disproportionation reaction of LaH₂ into and solid solution LaH_x (x<1) was confirmed.     

Beta-1,3-glucan polysaccharides as novel one-dimensional hosts for DNA/RNA, conjugated polymers and nanoparticles

Beta-1,3-glucan polysaccharides have triple-stranded helical structures whose sense and pitch are comparable to those of polynucleotides. We recently revealed that the beta-1,3-glucans could interact with certain polynucleotides to form triple-stranded and helical macromolecular complexes consisting of two polysaccharide-strands and one polynucleotide-strand. This unique property of the beta-1,3-glucans has made it possible to utilize these polysaccharides as potential carriers for various functional polynucleotides. In particular, cell-uptake efficiency of the resultant polysaccharide/polynucleotide complexes was remarkably enhanced when functional groups recognized in a biological system were introduced as pendent groups. The beta-1,3-glucans can also interact with various one-dimensional architectures, such as single-walled carbon nanotubes, to produce unique nanocomposites, in which the single-walled carbon nanotubes are entrapped within the helical superstructure of beta-1,3-glucans. Various conductive polymers and gold nanoparticles are also entrapped within the helical superstructure in a similar manner. In addition, diacetylene monomers entrapped within the helical superstructure can be photo-polymerized to afford the corresponding poly(diacetylene)-nanofibers with a uniform diameter. These findings indicate that the beta-1,3-glucans are very attractive and useful materials not only in biotechnology but also in nanotechnology. These unique properties of the beta-1,3-glucans undoubtedly originate from their inherent, very strong helix-forming character which has never been observed for other polysaccharides.     

Isothermal differential scanning calorimetry on an exothermic phenomenon during thermal decomposition of hydromagnesite 4 MgCO3 · Mg(OH)2 · 4 H2O

An exothermic phenomenon and a simultaneous rapid evolution of a small amount of carbon dioxide at ?500°C during thermal decomposition of hydromagnesite 4 MgCO₃ · Mg(OH)₂ · 4 H₂O was studied by isothermal DSCTG in a carbon dioxide atmosphere. It was quantitatively confirmed that the exothermic phenomenon was due to crystallization of MgCO₃ from the amorphous phase and that the evolution of carbon dioxide was due to decomposition of the MgCO₃ by the heat of crystallization (?3.4 kcal mole^?1.     

Photochemical generation of tetramethyldisilene and photoinduced 1,2-silyl-migration

Described herein is the first clear evidence of the photochemical generation of tetramethyldisilene which can be efficiently trapped by dienes. An intriguing 1,2-photo-induced silyl migration is also reported.     

New tridentate cyclometalated platinum(II) and palladium(II) complexes of N,2-diphenyl-8-quinolinamine: syntheses, crystal structures, and photophysical properties

A new tridentate cyclometalated platinum(II) complex derived from N,2-diphenyl-8-quinolinamine, which consists of two crystallographic independent molecules with two intermolecular N-H-Cl-Pt hydrogen bonds forming a dimer, exhibited a low-energy luminescence at ca. 740 nm in a 1 × 10⁻³ M dichloromethane solution and a strong emission centered at 670 nm in a solid state, but the analogous palladium(II) complex was nonemissive at room temperature.     

Swelling of poly(N-isopropylacrylamide) gels in water-aprotic solvent mixtures

The swelling volume of poly(N-isopropylacrylamide) (PIPAAm) gel in aprotic solvents (acetonitrile (AcN)-, tetrahydrofuran (THF)-, 1,4-dioxane (DO)- and dimethylsulfoxide (DMSO))-water mixtures was measured at 25°C. The gel swollen in water shrank first and then reswelled with addition of the aprotic solvents. At an intermediate mole fraction (XDMSO) range of DMSO-water mixtures, the gel demonstrated a reentrant swelling phenomenon the hydrated gel shrank first on addition of a small amount of solvent, showed a typical wide reentrant transition, and gradually reswelled in the range near pure solvent. On the other hand, the gels in AcN-, THF-, and DO-water mixtures demonstrated a reentrant-convex swelling phenomenon: the gels reswelled after a reentrant phase transition in low Xorg (XAcN, XTHF and XDO), showed a maximum swelling in the intermediate Xorg region, and shrank again gradually in the high Xorg region. Such a swelling behavior of the gel was interpreted by correlating with solution properties of the aqueous aprotic solvent mixtures.The strength of hydrogen bonding around amide groups of the homopolymer was examined in pure solvents (water, THF, and DMSO) and in all proportion of aqueous THF to observe the relation with swelling behavior of gel by spectrum analysis of the amide I and II bands of Fourier Transform Infrared Spectroscopy (FT-IR). The swelling properties of gels in solvents and the aqueous mixtures were well correlated with the peak shifts of amide groups of the homopolymer.     

A study of surface reproducibility and impurity segregation using ion neutralization and photoemission spectroscopies

We have studied the reproducibility of electron spectra obtained from a series of Si(111) surfaces on lightly doped crystals that were subjected to a common sputtering procedure but different subsequent heat treatments. Each of the surfaces displayed a sharp 7 × 7 LEED pattern and showed no impurities above the minimum detection limit of our Auger electron spectrograph. Ion neutralization spectroscopy (INS) and photoemission (UPS) at ?ω = 16.8 and 21.2 eV were used to obtain the electron spectra. From the observed differences in the electron spectra, the known characteristics of these spectroscopies, and a comparison with theory we conclude that these surfaces had small and differing amounts of impurity located principally in the selvedge or near-surface bulk rather than directly on or in the surface monolayer. The surface was cleaner than the near surface bulk. Longer heating of one sample to higher temperatures brought to the surface detectable amounts of Mo impurity that had diffused into the crystal from the Mo mounting clamps, changing the LEED pattern to √3 × √3(R 30°) and producing large modifications of both the INS and UPS spectra.     

Ion‐Free and Ion‐Pairing Assemblies of Anion‐Responsive π‐Electronic Systems Possessing Directly Linked Alkyl Chains

Alkyl‐substituted pyrrole‐based anion‐responsive π‐electronic systems formed supramolecular gels and liquid crystals through effective π–π stacking and van der Waals interactions. The addition of chloride as a planar cation salt afforded ion‐pairing assemblies as soft materials comprising planar receptor‐Cl^? complexes and the cation.