Polymerization of Acrylamide in Aqueous Solution of Poly(N‐isopropylacrylamide) at Lower Critical Solution Temperature

Acrylamide (AAm) was found to polymerize in a solution of poly(N‐isopropylacrylamide) (PNIPAAm) in water at around its lower critical solution temperature (LCST) (32°C) without any initiators. This phenomenon was specifically observed in aqueous solutions of the polymers having LCST such as PNIPAAm and poly(methylvinylether) (PMVE). AAm polymerized only when PNIPAAm and AAm were dissolved in water below LCST of PNIPAAm and then the solution was warmed up to the polymerization temperature (40°C). On the other hand, the polymerization of AAm did not proceed when AAm was added into aqueous PNIPAAm solution during and after the phase separation above 32°C. Furthermore the polymerizability of AAm was remarkably affected by the concentration and molecular weight of the PNIPAAm additives. Under the condition of lower PNIPAAm concentration (0.30 mol/L), the increase in the molecular weight of PNIPAAm considerably increased the molecular weight of the resulting PAAm but decreased the yield of PAAm. Under the condition of higher PNIPAAm concentration (0.60 mol/L) the polymerizability was not so affected by the molecular weight of PNIPAAm, while the molecular weight of PAAm formed by using higher molecular weight PNIPAAm was higher than those of PAAm formed by using lower molecular weight PNIPAAm. Moreover, the molecular weight of PAAm formed by the PNIPAAm induced polymerization of AAm was much higher than that of the polymer obtained by the radical polymerization using AIBN in THF or VA‐ 061 in water.     

A new memory effect: smectic liquid crystalline memory having both conductive and optical memory

In order to compensate for light leakage in the oblique viewing directions of the dark state of the horizontal-switching mode such as the in-plane switching and fringe field switching modes. The viewing angle performance of the horizontal-switching mode with an compensation film has been evaluated on a case by case basis according to the retardation values of the films. Consequently, we found that a much better dark state can be achieved by using an optimised compensation film.     

Fine structure of the (S(1)<--S(0)) band origins of phthalocyanine molecules in helium droplets

The laser-induced fluorescence (LIF) excitation spectra of free base phthalocyanine (Pc), Mg-Pc, and Zn-Pc molecules in superfluid helium droplets at T=0.38 K have been studied. The spectra reveal the rich vibronic structure of the S(1)<--S(0) electronic transitions. The band origins of the transitions consist of zero phonon lines accompanied by phonon wings, which originate from simultaneous electronic excitation of the molecule and excitation of the collective modes of the helium surrounding it. The phonon wings have discrete structures suggesting localization of some helium atoms in the neighborhood of the molecules. Zero phonon lines of Mg-Pc and Zn-Pc molecules are split into three components, which are separated by 0.2-0.4 cm(-1). Possible mechanism of splitting involves static or dynamic Jahn-Teller interaction of metal-phthalocyanine molecules in the twofold degenerate S(1)((1)E(u)) state with the helium shell.     

Molecular structure of 3-methylthiophene studied by gas electron diffraction combined with microwave spectroscopic data

The molecular structure of 3-methylthiophene has been determined by gas electron diffraction (GED) combined with microwave (MW) spectroscopic data. Ab initio calculations at the HF/3–21G* level were carried out and used as structural constraints in the data analysis. The torsional vibration of the methyl group was treated as a large-amplitude motion. The structural parameters were determined to be: r_{g(S---C2) = 1.719(2) Å}, r_{g(C2=C3) = 1.370(3) Å}, r_{g(C3---C6) = 1.497(6) Å}, r_{g(C2---H) = 1.101(5) Å}, CSC = 91.6(2)°, SC₂C₃ = 113.3(5)°, SC₅C₄ = 111.3(3)°, C₂C₃C₆ = 123.2(11)° and C₃C₆H = 112(2)°. The values of r(S---C₂) - r(S=C₅) and r(C₂=C₃)-r(C₄ =C₅) were fixed at the 3–21G* value of 0.002 Å. Parenthesized values are the estimated limits of error (3σ) referring to the last significant digit.     

A-type cranberry proanthocyanidins inhibit the RANKL-dependent differentiation and function of human osteoclasts

This study investigated the effect of A-type cranberry proanthocyanidins (AC-PACs) on osteoclast formation and bone resorption activity. The differentiation of human pre-osteoclastic cells was assessed by tartrate-resistant acid phosphatase (TRAP) staining, while the secretion of interleukin-8 (IL-8) and matrix metalloproteinases (MMPs) was measured by ELISA. Bone resorption activity was investigated by using a human bone plate coupled with an immunoassay that detected the release of collagen helical peptides. AC-PACs up to 100 μg/mL were atoxic for osteoclastic cells. TRAP staining evidenced a dose-dependent inhibition of osteoclastogenesis. More specifically, AC-PACs at 50 μg/mL caused a 95% inhibition of RANKL-dependent osteoclast differentiation. This concentration of AC-PACs also significantly increased the secretion of IL-8 (6-fold) and inhibited the secretion of both MMP-2 and MMP-9. Lastly, AC-PACs (10, 25, 50 and 100 μg/ml) affected bone degradation mediated by mature osteoclasts by significantly decreasing the release of collagen helical peptides. This study suggests that AC-PACs can interfere with osteoclastic cell maturation and physiology as well as prevent bone resorption. These compounds may be considered as therapeutic agents for the prevention and treatment of periodontitis.     

Highly durable Pd metal catalysts for the oxygen reduction reaction in fuel cells; coverage of Pd metal with silica

Pd cathode catalysts for polymer electrolyte fuel cells have been covered with silica layers a few nanometres thick. The silica-coated Pd catalysts showed high activity and excellent durability for the oxygen reduction under the severe cathode conditions of PEFCs, while Pd catalysts without silica-coating were seriously deactivated under the same conditions. The coverage of Pd metal with silica prevents the diffusion of Pd species out of the silica layers.     

Revised structures of gambiriins A1, A2, B1, and B2, chalcane-flavan dimers from gambir (Uncaria gambir extract)

Gambir, the aqueous extract from Uncaria gambir (Rubiaceae), has been used as an astringent medicine in Asian countries. Investigation of the constituents in the extract led to the isolation of four chalcane-flavan dimers, gambiriin A1 (6), A2 (7), B1 (8), and B2 (9), in addition to (+)-catechin (1), (+)-epicatechin (2), and dimeric proanthocyanidins, procyanidin B1 (3), procyanidin B3 (4), and gambiriin C (5). The spectroscopic and chemical data obtained in the present study indicated that their previously proposed structures 6a, 7a, 8a, and 9a should be revised to 6, 7, 8, and 9, respectively.     

Utilization of gamma-ray irradiation for hydrogen production from water

A technique has been proposed to promote hydrogen production from water by increasing the energy deposition in water through the conversion of γ-ray to low-energy electrons, which is achieved by putting solid materials into water. Simulation studies by the MCNP code indicate that the average deposited energy in water can be increased by optimizing geometry of the materials. In the present experiments using Al₂O₃ particles of various average diameters, the maximum amount of hydrogen produced is 3.48 μmol/cm³ for the water containing Al₂O₃ particles of 3 μm diameter, which is more than two order of magnitude larger of the H₂ produced in water-only configuration.