Determination of methylated arginines by column-switching high-performance liquid chromatography-fluorescence detection

A column-switching high-performance liquid chromatography (HPLC)-fluorescence detection method for the determination of three methylated arginines, N(G)-monomethyl-L-arginine (L-NMMA), N(G),N(G)-dimethyl-L-arginine (asymmetric dimethyl-L-arginine, ADMA), and N(G),N(G)'-dimethyl-L-arginine (symmetric dimethyl-L-arginine, SDMA), which are endogenous nitric oxide synthase inhibitors, was developed. After fluorescence derivatization of plasma samples with 4-fluoro-7-nitro-2,1,3-benzoxadiazole (NBD-F), the samples were injected into the HPLC system. The NBD-derivatized methylated arginines were trapped on a cation exchange column with filter to remove proteins, separated within 42 min on a reversed-phase column, and detected at an emission wavelength of 530 nm with excitation at 470 nm. The detection limits were 10 fmol for L-NMMA and 20 fmol for ADMA and SDMA with a signal-to-noise ratio of 3. A good linearity for calibration curves for each methylated arginine was observed within the range of 50-5000 fmol using homoarginine as an internal standard. The proposed method was applied to the quantitative determination of L-NMMA, ADMA and SDMA in rat plasma. The concentrations of L-NMMA, ADMA and SDMA in rat plasma were 0.16 +/- 0.01, 0.73 +/- 0.02 and 0.41 +/- 0.05 micromol l(-1), respectively (n= 5).     

Fine structure of the (S(1)<--S(0)) band origins of phthalocyanine molecules in helium droplets

The laser-induced fluorescence (LIF) excitation spectra of free base phthalocyanine (Pc), Mg-Pc, and Zn-Pc molecules in superfluid helium droplets at T=0.38 K have been studied. The spectra reveal the rich vibronic structure of the S(1)<--S(0) electronic transitions. The band origins of the transitions consist of zero phonon lines accompanied by phonon wings, which originate from simultaneous electronic excitation of the molecule and excitation of the collective modes of the helium surrounding it. The phonon wings have discrete structures suggesting localization of some helium atoms in the neighborhood of the molecules. Zero phonon lines of Mg-Pc and Zn-Pc molecules are split into three components, which are separated by 0.2-0.4 cm(-1). Possible mechanism of splitting involves static or dynamic Jahn-Teller interaction of metal-phthalocyanine molecules in the twofold degenerate S(1)((1)E(u)) state with the helium shell.     

Alcohol‐Vapor Inclusion in Single‐Crystal Adsorbents [MII2(bza)4(pyz)]n (M=Rh,Cu): Structural Study and Application to Separation Membranes

The vapor absorbency of the series of alcohols methanol, ethanol, 1‐propanol, 1‐butanol, and 1‐pentanol was characterized on the single‐crystal adsorbents [M^II₂(bza)₄(pyz)]_n (bza=benzoate, pyz=pyrazine, M=Rh ( 1 ), Cu ( 2 )). The crystal structures of all the alcohol inclusions were determined by single‐crystal X‐ray crystallography at 90 K. The crystal‐phase transition induced by guest adsorption occurred in the inclusion crystals except for 1‐propanol. A hydrogen‐bonded dimer of adsorbed alcohol was found in the methanol‐ and ethanol‐inclusion crystals, which is similar to a previous observation in 2 ?2EtOH (S. Takamizawa, T. Saito, T. Akatsuka, E. Nakata, Inorg. Chem. 2005 , 44, 1421–1424). In contrast, an isolated monomer was present in the channel for 1‐propanol, 1‐butanol, and 1‐pentanol inclusions. All adsorbed alcohols were stabilized by hydrophilic and/or hydrophobic interactions between host and guest. From the combined results of microscopic determination (crystal structure) and macroscopic observation (gas‐adsorption property), the observed transition induced by gas adsorption is explained by stepwise inclusion into the individual cavities, which is called the “step‐loading effect.” Alcohol/water separation was attempted by a pervaporation technique with microcrystals of 2 dispersed in a poly(dimethylsiloxane) membrane. In the alcohol/water separation, the membrane showed effective separation ability and gave separation factors (alcohol/water) of 5.6 and 4.7 for methanol and ethanol at room temperature, respectively.     

A redox-active ionic liquid manifesting charge-transfer interaction between a viologen and carbazole and its effect on the viscosity,ionic conductivity,and redox process of the viologen

Redox-active ionic liquids (RAILs) are gaining attention as a material that can create a wide range of functions. We herein propose a charge-transfer (CT) RAIL by mixing two RAILs, specifically a carbazole-based ionic liquid ([CzC₄ImC₁][TFSI]) as a donor and a viologen-based ionic liquid ([C₄VC₇][TFSI]₂) as an acceptor. We investigated the effect of CT interaction on the physicochemical properties of the CT ionic liquid (CT-IL) using the results of temperature-dependent measurements of UV-vis absorption, viscosity, and ionic conductivity as well as cyclic voltammograms. We employed the Walden analysis and the Grunberg–Nissan model to elucidate the effect of the CT interaction on the viscosity and ionic conductivity. The CT interaction reduces the viscosity by reducing the electrostatic attraction between the dicationic viologen and TFSI anion. It also reduces the ionic conductivity by the CT association of the dicationic viologen and carbazole. The electrochemically reversible responses of the viologens in [C₄VC₇][TFSI]₂ and CT-IL are consistent with the Nernstian and the interacting two-redox site models. Notably, the transport and electrochemical properties are modulated by CT interaction, leading to unique features that are not present in individual component ILs. The inclusion of CT interaction in RAILs thus provides a powerful means to expand the scope of functionalized ionic liquids.

A redox-active ionic liquid (RAIL) consisting of a carbazole and viologen shows charge transfer (CT) interaction. The physicochemical properties are modulated by the CT interaction by comparison with the individual RAILs.     

Creation of novel chiral synthons with enzymes and applications to natural product synthesis. 15. Efficient introduction of chiral centers into cyclohexane ring

The chiral half-ester 2 obtained by asymmetric hydrolysis of the symmetric diester 1 with pig liver esterase has been shown to be a versatile synthon for various chiral cyclohexane derivatives.     

Photocrosslinking of poly(2,3-epithiopropyl methacrylate) by the oxidation of pendant episulfide groups

In the photocrosslinking of poly(2,3-epithiopropyl methacrylate) (PETMA) films the effect of the pendant episulfide group's oxidation on the crosslinking of PETMA was investigated. Thermal crosslinking of PETMA is promoted by peroxides such as benzoyl peroxide and hydrogen peroxide. IR spectrum of the crosslinked PETMA showed that the reaction proceeded through the oxidation of episulfide groups by the peroxides. The anthracene (An) sensitized photocrosslinking of PETMA films also proceeded via the oxidation of episulfide groups by singlet oxygen. It was found that residual tetrahydrofuran (THF) in the films remarkably increased the rate of the photocrosslinking and/or reduced the induction period. From the further investigation concerning casting solvents it was found that residual CS₂, CCl₄, and CHCl₃ in films increased the rate of the photocrosslinking and/or reduced the induction period of the photocrosslinking. The disappearance rate of An in the films was also increased by the presence of residual CS₂, CCl₄, and CHCl₃, differring from the result of THF. These results were explained by a difference in lifetime of singlet oxygen in the films. From the results were explained by a difference in lifetime of singlet oxygen in the films. From the results concerning the effects of hydroperoxides such as THF hydroperoxide and t-butyl hydroperoxide on the photocrosslinking of PETMA films the acceleration effect of the residual THF was deduced to be due to the promotion of singlet oxygen-oxidation of sulfide groups by protic compounds such as THF hydroperoxide and H₂O in the THF.     

A new memory effect: smectic liquid crystalline memory having both conductive and optical memory

In order to compensate for light leakage in the oblique viewing directions of the dark state of the horizontal-switching mode such as the in-plane switching and fringe field switching modes. The viewing angle performance of the horizontal-switching mode with an compensation film has been evaluated on a case by case basis according to the retardation values of the films. Consequently, we found that a much better dark state can be achieved by using an optimised compensation film.