Fresnel filtering of Gaussian beams in microcavities

We study the output from the modes described by the superposition of Gaussian beams confined in the quasi-stadium microcavities. We experimentally observe the deviation from Snell's law in the output when the incident angle of the Gaussian beam at the cavity interface is near the critical angle for total internal reflection, providing direct experimental evidence on the Fresnel filtering. The theory of the Fresnel filtering for a planar interface qualitatively reproduces experimental data, and a discussion is given on small deviation between the measured data and the theory.     

The ̅K N → π Σ decay threshold effect in 3He(in-flight K –, n) reaction spectrum

The formation of a deeply-bound K?? ^–? pp state by the ³He(in-flight K? ^–, n) reaction is investigated theoretically in a distorted-wave impulse approximation using the Green’s function method. The expected inclusive and semi-exclusive spectra at $p_{K^-} = 1.0$ GeV/c and $\theta_n = 0^{\circ}$ are calculated for the forthcoming J-PARC E15 experiment. We discuss these spectra with some K? ^–-“pp” optical potentials, taking into account the energy-dependence of the imaginary part of the potentials by a phase space suppression factor.     

Synthesis and ion selectivity of macrocyclic metacyclophanes analogous to spherand-type calixarenes

Novel macrocyclic compounds, hexahydroxy[1.0.1.0.1.0]- (2b) and octahydroxy[1.0.1.0.1.0.1.0]metacyclophane (2c) have been prepared in 50–70% yield by base-catalyzed condensation of 5,5-di-tert-butyl-2,2-dihydroxybiphenyl (1) with formaldehyde in refluxing xylene. An attempted alkylation of the flexible macrocycles2b and2c with ethyl bromoacetate in the presence of Cs₂CO₃ under acetonitrile reflux gave only one pure stereoisomer3 and4, respectively, while other possible isomers were not observed. The structural characterization of these products is also discussed. The two-phase solvent extraction data indicated that hexaethyl ester3 and octaethyl ester4 show strong metal affinity, comparable with that of the corresponding calix[n]arenes, and a high K⁺ selectivity was observed for octaethyl ester4.¹H-NMR titration of hexaethyl ester3 and octaethyl ester4 with KSCN clearly demonstrate that a 11 complex is formed which is stable on the NMR time scale.This paper is dedicated to the commemorative issue on the 50th anniversary of calixarenes.     

Preparation of polysiloxanes from silicic acid. III. Preparation and properties of polysilicic acid butyl esters

Polysilicic acid butyl esters were prepared from 1-butanol and silicic acid extracted from sodium metasilicate solution and water glass with tetrahydrofuran and hydrochloric acid. The properties of the esters were dependent on the degree of esterification (DE). The esters with a DE of less than ca. 60% could be isolated by precipitation with hexane and were highly liable to self-condensation, whereas those with more than 60% DE were soluble in solvents and could not be precipitated easily. They underwent further condensation to form highly polymerized esters. Subsequent silylation allowed the isolation and characterization of these esters. The solvent-soluble silylated esters had moderate thermal stability with decomposition points between 210 and 260°C and number-average molecular weights of 10,000–30,000. From the evaluation of units structures of silylate it was suggested that polymer backbone was a pseudoladder structure.     

Silylation of water glass. I. Solvent extraction and trimethylsilylation of silicic acid

Homogeneous trimethylsilylation of silicic acid in nonaqueous media was studied. The silylation process consisted of three steps: acidification of sodium silicate, solvent extraction. and trimethylation of silicic acid. Sodium silicate was first acidified with dilute sulfuric acid to form silicic acid: extraction followed with hydrophilic organic solvents. The Silicic acid obtained was finally allowed to react with trimethylchlorosilane to give trimethylsilylates with molecular weights of 1000–12,000. Optimum conditions for each step have been intensively sought to achieve trimethylsilylates in high yield. The trimethylsilylates exhibited excellent thermal stability and surface properties, such as water repellency and antifoaming properties, comparable to those of conventional polydimethylsiloxanes.     

Concentration levels and behavior of transuranium nuclides in Japanese coastal marine environment

The concentration of^239,240Pu and²⁴¹Am in different samples collected from the coastal marine environment of Ibaraki Prefecture, Japan facing the Pacific Ocean have been studied. Seawater samples have been collected since 1975 and sea-biota since 1981. The mean concentration levels of^239,240Pu and²⁴¹Am were 0.51, 0.20 for anchovy, 0.22, 0.11 for flounder, 4.9, 0.77 for brown algae, 2.0, 2.4 for shellfish, and 0.022, 0.0028 for seawater (in mBq/kl), respectively. The chronological change of^239,240Pu in seawater was influence by fallout amounts. The activity ratio between the nuclides showed steady levels after two years from the end of atmospheric nuclear explosion tests. Activity levels and the ratios for each type of sample are briefly discussed.     

Studies on the syntheses of polymetalloxanes and their properties as a precursor for amorphous oxide. IV. Properties of SiO2–TiO2 oxide fibers from polytitanosiloxane

From polytitanosiloxanes (PTS), SiO₂–TiO₂ oxide fibers with fairly good tensile strength were prepared, and their mechanical and thermal properties were investigated. The precursor fibers PTS-0.5 and PTS-1.0 were obtained by dry spinning of a highly viscous PTS solution which were formed as the reaction mixture of silicic acid (SA) with bis(2,4-pentanedionato)titanium diisopropoxide (PTP) in the molar ratios (SA/PTP) of 0.5 and 1.0. The precursor fibers PTS-0.5 were too brittle to measure their tensile strength, whereas PTS-1.0 and the heat-treated fibers were found to have tensile strength of 130 (precursor), 540 (500°C), and 450 (900°C) MPa, respectively. Heat-treatment of the fibers PTS-1.0 at above 1000°C forms anatase and rutile of titanium dioxide. The crystallization is resulted from the unreacted PTP which is not incorporated into the polymer network.     

Flow-injection spectrophotometric determination of acetyl-coenzyme A with immobilized phosphotransacetylase

Phosphotransacetylase (PTA) is immobilized on AF-Tresyl TOYOPEARL 650 gel and used on-line in a stainless-steel column (10 × 4 mm i.d.). CoA-SH liberated enzymatically from acetyl-CoA is reacted with Ellman's reagent [5,5′-dithiobis(2-nitrobenzoic acid)] in the carrier stream. The calibration graph for acetyl-CoA is linear from 4 × 10^?6 to 4 × 10^?4 M and the detection limits is 8 × 10^?7 M. The immobilized enzyme can be employed for over 4 months without any significant decrease in activity. The enzyme retains its activity in methanol even though the initial rate of reaction is decreased.