Synthesis,Crystal Structures,and Properties of 6,12‐Diaryl‐Substituted Indeno[1,2‐b]fluorenes

Fused polycyclic indeno[1,2‐b]fluorene derivatives with aryl substituents at the 6,12‐positions have been prepared as a potential antiaromatic 20π electronic system. They showed strong absorptions in the visible region and amphoteric redox properties. The quinoid‐type molecular structures were revealed by X‐ray crystal‐structure analysis, which indicated that the bond lengths of the quinoid unit depend on the aryl substituents. Whereas nucleus‐independent chemical shift NICS(1) calculations indicate the antiaromatic nature of the s‐indacene core, they have higher stability than substituted acene derivatives. The derivatives with difluorophenyl or anthryl groups were stable in solution. Vapor‐deposited thin films showed ambipolar carrier transportation in the field‐effect transistor devices.     

Formation and characterization of water-soluble hetero capsules derived from multiple ionic interactions

We now report the formation and characterization of water-soluble hetero-capsules 1·2 resulting from the ionic interactions between positively charged flexible aniline hydrochloride 1 and negatively charged phosphonate 2 having rigid homooxacalix[3]arene units. The formation of the molecular capsules was studied by NOESY, DOSY NMR spectroscopy and ESI-Mass spectrometry. The water solubility of the capsules is improved by the introduction of mono- or triethylene glycol substituents in the homooxacalix[3]arene-based phosphonate units 2.     

Effective synthesis of diiodinated picene and dibenzo[a,h]anthracene by AuCl-catalyzed double cyclization

6,13-Diiododibenzo[a,h]anthracene and 5,8-diiodopicene were synthesized by AuCl-catalyzed double cyclization. The highly selective reaction yielded a new class of peri-halogenated fused aromatics.     

Silicon Oxide Coatings with Very High Rates (>10?nm/s) by Hexamethyldisiloxane-Oxygen Fed Atmospheric-Pressure VHF Plasma: Film-Forming Behavior Using Cylindrical Rotary Electrode

Silicon oxide films are deposited in atmospheric-pressure (AP) He/O₂/HMDSO plasma excited by a 150?MHz VHF power using a cylindrical rotary electrode. The atomic bonding configurations and deposition rate are studied by controlling the O₂ concentration (O₂/HMDSO source ratio) and VHF power density, the other parameters being maintained constant. Under the addition of 0.03?% O₂ to the process gas mixture (O₂/HMDSO????0.09), AP-VHF plasma greatly enhances the fragmentation and oxidation of HMDSO, so that an almost inorganic film is obtained at a very high deposition rate of 33?nm?s^?1. A silicon oxide coating on a polycarbonate pane is demonstrated with no significant thermal deformation of the pane, showing that AP-VHF plasma would be an efficient coating tool for polymer substrates.     

Preparation and properties of processable polyimides having bulky pendent ether groups

A series of aromatic diamines containing pendent methoxy, phenoxy, and biphenoxy moieties were synthesized. By the reaction of diamines with 3,3′,4,4′-benzophenonetetracarboxylic dianhydride (BTDA), several kinds of polyimides having bulky pendent ether groups were synthesized. Thermal properties and processability such as melt processability and solubility in organic solvents of obtained polyimides were investigated by focusing on the chemical structures of their repeating structure units. It was found that the thermal stability and melt processability of the polyimides did not strongly depend on the existence of bulky pendent phenoxy and biphenoxy moieties. Their solubility in organic solvents, however, was improved by introducing the bulky pendent ether groups such as methoxy, phenoxy, and biphenoxy moieties into their repeating structure units. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 971–978, 1998     

p-Nitrophenol permeability and temperature characteristics of an acryloyl-L-proline methyl ester-based porous gel membrane

Thermoresponsive porous gel membranes were synthesized by a simultaneously occurring process consisting of radiation-induced polymerization and crosslinking in aqueous solutions at various concentrations of acryloyl-L -proline methyl ester(A-ProOMe) without a crosslinker. Permeation of p-nitrophenol (PNP) through a thermoresponsive porous gel membrane obtained at a monomer concentration of 80% (w/w) drastically reduced around 14°C, the lower critical solution temperature (LCST) of linear poly(A-ProOMe) in water, from 0.60 × 10⁻³ cm/min at 10°C to no permeation at 18°C, accompanied by changes in both size and shape of pores associated with gel shrinkage. Moreover, it was found that porous gel membranes with a porosity of approximately 60% had a greater PNP permeability constant through porous gel membranes with mutually connected pores obtained at a monomer concentration of 50% (w/w) than individually supported pores obtained at a monomer concentration of 70% (w/w). © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1495–1500, 1998     

Chiral‐Substrate‐Assisted Stereoselective Epoxidation Catalyzed by H2O2‐Dependent Cytochrome P450SPα

The stereoselective epoxidation of styrene was catalyzed by H₂O₂‐dependent cytochrome P450_SPα in the presence of carboxylic acids as decoy molecules. The stereoselectivity of styrene oxide could be altered by the nature of the decoy molecules. In particular, the chirality at the α‐positions of the decoy molecules induced a clear difference in the chirality of the product: (R)‐ibuprofen enhanced the formation of (S)‐styrene oxide, whereas (S)‐ibuprofen preferentially afforded (R)‐styrene oxide. The crystal structure of an (R)‐ibuprofen‐bound cytochrome P450_SPα (resolution 1.9 Å) revealed that the carboxylate group of (R)‐ibuprofen served as an acid–base catalyst to initiate the epoxidation. A docking simulation of the binding of styrene in the active site of the (R)‐ibuprofen‐bound form suggested that the orientation of the vinyl group of styrene in the active site agreed with the formation of (S)‐styrene oxide.     

Cyano‐Bridged MnIII?MIII Single‐Chain Magnets with MIII=CoIII,FeIII, MnIII,and CrIII

A series of isostructural cyano‐bridged Mn^III(h.s.)–M^III(l.s.) alternating chains, [Mn^III(5‐TMAMsalen)M^III(CN)₆] ? 4H₂O (5‐TMAMsalen^2?=N,N′‐ethylenebis(5‐trimethylammoniomethylsalicylideneiminate), Mn^III(h.s.)=high‐spin Mn^III, M^III(l.s.)=low‐spin Co^III, Mn? Co ; Fe^III, Mn? Fe ; Mn^III, Mn? Mn ; Cr^III, Mn? Cr ) was synthesized by assembling [Mn^III(5‐TMAMsalen)]³⁺ and [M^III(CN)₆]^3?. The chains present in the four compounds, which crystallize in the monoclinic space group C2/c, are composed of an [‐Mn^III‐NC‐M^III‐CN‐] repeating motif, for which the ‐NC‐M^III‐CN‐ motif is provided by the [M^III(CN)₆]^3? moiety adopting a trans bridging mode between [Mn^III(5‐TMAMsalen)]³⁺ cations. The Mn^III and M^III ions occupy special crystallographic positions: a C₂ axis and an inversion center, respectively, forming a highly symmetrical chain with only one kind of cyano bridge. The Jahn–Teller axis of the Mn^III(h.s.) ion is perpendicular to the N₂O₂ plane formed by the 5‐TMAMsalen tetradentate ligand. These Jahn–Teller axes are all perfectly aligned along the unique chain direction without a bending angle, although the chains are corrugated with an Mn‐N_axis‐C angle of about 144°. In the crystal structures, the chains are well separated with the nearest inter‐chain M???M distance being relatively large at 9 Å due to steric hindrance of the bulky trimethylammoniomethyl groups of the 5‐TMAMsalen ligand. The magnetic properties of these compounds have been thoroughly studied. Mn? Fe and Mn? Mn display intra‐chain ferromagnetic interactions, whereas Mn? Cr is characterized by an antiferromagnetic exchange that induces a ferrimagnetic spin arrangement along the chain. Detailed analyses of both static and dynamic magnetic properties have demonstrated without ambiguity the single‐chain magnet (SCM) behavior of these three systems, whereas Mn? Co is merely paramagnetic with S_Mn=2 and D/k_B=?5.3 K (D being a zero‐field splitting parameter). At low temperatures, the Mn? M compounds with M=Fe, Mn, and Cr display remarkably large M versus H hysteresis loops for applied magnetic fields along the easy magnetic direction that corresponds to the chain direction. The temperature dependence of the associated relaxation time for this series of compounds systematically exhibits a crossover between two Arrhenius laws corresponding to infinite‐chain and finite‐chain regimes for the SCM behavior. These isostructural hetero‐spin SCMs offer a unique series of alternating [‐Mn‐NC‐M‐CN‐] chains, enabling physicists to test theoretical SCM models between the Ising and Heisenberg limits.     

Synthesis and radical polymerization of styrene‐based monomer having a five‐membered cyclic carbonate structure

A styrene‐based monomer having a five‐membered cyclic carbonate structure, 4‐vinylbenzyl 2,5‐dioxoran‐3‐ylmethyl ether (VBCE), was prepared by lithium bromide‐catalyzed addition of carbon dioxide to 4‐vinylbenxyl glycidyl ether (VBGE). Radical polymerization of the obtained VBCE was carried out using 2,2′‐azobisisobutyronitrile as an initiator. PolyVBCE with number‐averaged molecular weight higher than 13,800 was obtained by a solution polymerization in N,N‐dimethylformamide, N,N‐dimethylacetamide, dimethyl sulfoxide, and methyl ethyl ketone. The glass transition temperature and 5 wt % decomposition temperature of the polyVBCE were determined to be 52 and 305 °C by differential scanning calorimetry and thermal gravimetry analysis, respectively. It was confirmed that a polymer consisting of the same VBCE repeating unit can be also obtained via chemical modification of polyVBGE, that is, a lithium‐bromide‐catalyzed addition of carbon dioxide to a polyVBGE prepared from a radical polymerization of VBGE. Further copolymerization of VBCE with styrene gave the corresponding copolymer in a high yield. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012