Characterization of heat-assisted magnetic probe recording on CoNi/Pt multilayers

A method of heat-assisted magnetic recording (HAMR) potentially suitable for probe-based storage systems is characterized. In this work, field emission current from a scanning tunneling microscope (STM) tip is used as the heating source. Pulse voltages of 2–7 V were applied to a CoNi/Pt multilayered film fabricated on either bare silicon or oxidized silicon substrates. Different types of Ir/Pt and W STM tips were used in the experiment. The results show that thermally recorded magnetic marks are formed with a nearly uniform mark size of 170 nm on the film fabricated on bare silicon substrate when the pulse voltage is above a threshold voltage. The mark size becomes 260 nm when they are written on the identical film fabricated on an oxidized silicon substrate. The threshold voltage depends on the material work function of the tip, with W having a threshold voltage about 1 V lower than Pt. A synthesized model, which contains the calculation of the emission current, the simulation of heat transfer during heating, and the study of magnetic domain formation, was introduced to explain experimental results. The simulation agrees well with the experiments.     

Ethylene polymerization by chromium complexes with phosphorous‐bridged bisphenoxy ligand

Chromium catalysts combined with phosphorous‐bridged bisphenoxy ligands were found to be highly active for ethylene polymerization. The most efficient catalyst precursor among them, generated by combining bis[3‐tert‐butyl‐5‐methyl‐2‐hydroxyphenyl](phenyl)phosphine hydrochloride ( 1a ) and CrCl₃(THF)₃, was characterized. X‐ray analysis of (3‐tert‐butyl‐5‐methyl‐2‐phenoxy)(3‐tert‐butyl‐5‐methyl‐ 2‐hydroxyphenyl)(phenyl)phosphine bis(tetrahydrofuran)chromium dichloride ( 6 ), obtained by the reaction of 1a and CrCl₃(THF)₃ in the presence of NaH, revealed a unique structure in which one phenol moiety of the bisphenol did not coordinate to the chromium center. Complex 6 showed higher activities than those observed in the in situ catalyst system. Polyethylene of various molecular weights was obtained with differing activators. The highest activity (113.5 kg mmol (cat)^?1 h^?1) was observed when TIBA/TB was used as a cocatalyst. A medium molecular weight polymer with narrow molecular weight distribution (M_w = 128,700, M_w/M_n = 1.8) was obtained using a 6 ‐TIBA/B(C₆F₅)₃ system. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3668–3676, 2007     

Preparation and characterization of mesoporous silica thin films from polyethoxysiloxanes

Tetraethoxysilane (TEOS) and polyethoxysiloxanes (PEOSs; prepared by the acid‐catalyzed hydrolytic polycondensation of TEOS) were subjected to the sol–gel process in the presence of cetyltrimethylammonium bromide (CTAB), respectively. The PEOSs with M_w 700–26,000, as prepared by sol–gel coating of TEOS and PEOS under various conditions, were used. Uniform and crack‐free thin films of thickness 276–613 nm were prepared by spin‐coating of a PEOS solution containing CTAB. When the coating films were sintered at 400 °C, the combustion of ethoxy groups and CTAB took place to provide porous silica thin films. The structure of the thin films was found to be dependent on the molecular weight of PEOS and the molar ratio of CTAB/Si: lamellar or hexagonal phase was observed for M_w less than 15,000 and for CTAB/Si molar ratios greater than 0.10. Honeycomb structures were observed for M_w less than 5000 and for CTAB/Si molar ratios of 0.15. The honeycomb structure was also observed by atomic force microscopy and transmission electron microscope. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2542–2550, 2006     

High-performance liquid chromatographic method for determining trichothecene mycotoxins by post-column fluorescence derivatization

The method described here is based on a separation of deoxynivalenol, nivalenol and fusarenon-X on a C18 column using aqueous acetonitrile, and successive post-column fluorescence derivatization involving an alkaline decomposition to form formaldehyde and modified Hantzsch reaction with methyl acetoacetate and ammonium acetate (lambda ex = 370 nm and lambda em = 460 nm). By this method, 5-10 ng of the standard trichothecenes could be determined. By employing a clean-up procedure with a florisil column and a Sep-Pak CN cartridge, 61.4-96.9% recoveries were obtained for deoxynivalenol and nivalenol added to corn, wheat and barley at concentration levels of 0.05-1 ppm.     

Evaluation of radioimmunoassay of the blood tobramycin level for the purpose of setting the dosage based on the clinical pharmacokinetic theory and a comparison of radioimmunoassay with other assay methods

With the purpose to use for therapeutic drug monitoring (TDM), blood concentrations of tobramycin (TOB) in each patient were measured by radioimmunoassay (RIA). A RIA kit of TOB (Clinical assay-Japan Travenol) was evaluated for precision and recovery, in that partial improvement of the method was made, in order to measure low level of TOB. The RIA was compared with high-performance-liquid-chromatography (HPLC), bioassay (BA) and 2 kinds of enzyme immunoassay (EIA) (EMIT and SLFIA). The RIA of TOB revealed high precision (1.8-2.4% in C.V.) and high reproducibility (5.0-6.9% in C.V.). It was found that this RIA kit can be used for measuring low level of serum TOB concentrations by a modification of the method. The total range of measurable blood level is from 0.1 to 16.0 micrograms/ml. The nearly one to one correspondence was observed between RIA and other 4 methods, when 154 samples obtained from 18 cases were measured. A representative case of TDM for TOB was demonstrated, in which predicted concentrations agreed fairly well with actual measured values at steady state. It was concluded that the RIA kit is useful for clinical application of TDM for the adequate dosage regimen of TOB. Modification of the method for rapid assay of a small number of samples will increase the clinical usefulness.     

Studies on the formation of aliphatic aldehydes in the plasma and liver of vitamin E-deficient rats

The effects of vitamin E (E) deficiency on the formation of aliphatic aldehydes in rat plasma and liver were studied. Three-week-old Wistar male rats were fed either an E supplemented diet (2-ambo-alpha-tocopheryl acetate 20 mg/kg diet, designated as E supplemented diet group) or an E deficient diet (E deficient diet group). After 8 weeks, n-hexanal and (E)-4-hydroxy-2-nonenal (4-HN) in the plasma of the E deficient diet group were found to be 2.0 and 2.5-fold greater than those of the E supplemented diet group, respectively. The contents of aldehydes such as n-pentanal, n-hexanal, 4-HN in the liver were also significantly higher in the E deficient diet group than in the E supplemented diet group. These results indicate that some aldehydes, arising possibly from lipid peroxides, are produced and detected in the plasma and liver of rats under the condition like E deficiency. In this study we further found that the activity of the liver aldehyde dehydrogenase (ALDH, EC 1.2.1.3) was significantly changed; 5 and 8 weeks after the start it was lower in the E deficient diet group when compared to that in the E supplemented diet group. The decrease of enzyme activity was related to the increase of aldehydes such as n-hexanal in the liver. the aldehyde increase in the plasma of the E deficient diet group was thought to raise the injury of cells, namely, a strong hemolysis on erythrocytes prepared from the blood of rats fed the E deficient diet.     

Determination of 20 alpha-hydroxy-9 beta,10 alpha-pregna-4,6-dien-3-one in plasma by selected ion monitoring

A selected ion monitoring (SIM) method has been devised for the determination of metabolites of dydrogesterone, 20 alpha-hydroxy-9 beta,10 alpha-pregna-4,6-dien-3-one (DHD) and DHD glucuronide, in plasma. Using testosterone as an internal standard (IS), DHD and IS were extracted with n-hexane and were purified by means of magnesium oxide column chromatography. The purified DHD and IS were converted to their diheptafluorobutyryl derivatives (DHD diHFB and testosterone diHFB) with heptafluorobutyric anhydride in acetone for analysis by SIM. SIM was carried out with a 2% OV-17 column (1 m) at 230 degrees C by monitoring the molecular ions of the derivatives (m/z 706 for DHD diHFB, m/z 680 for testosterone diHFB). DHD was determined from a calibration curve using a peak area method. The determination limit of the devised method was about 5 ng DHD per ml of plasma and the reproducibility was within +/- 6% of the coefficient of variation for 30 ng of DHD per ml of plasma or above.