Asymmetric cyclization of 2-alkenylphenols. A comparative study on the use of palladium(II) and titanium(IV) complexes

The oxidative cyclization of 2-(3-pentenyl)phenol catalyzed by [(η³-pinene)PdOAc]₂ gives optically active (+)-2-vinylchroman (25% e.e.), while (−)-2-(1-hydroxyethyl)chroman (56% e.e.) is formed as a single diastereomer upon treatment with t-BuOOH in the presence of Ti(OⁱPr)₄ and -(+)-diethyl tartrate. 2-(2-Butenyl)phenol also undergoes the Ti-promoted asymmetric cyclization to give (2S,1′R)-(−)-2-(1-hydroxyethyl)-2,3-dihydrobenzofuran (29% e.e.).     

Effect of monomer concentration on characteristics of methacrylic acid-grafted polyethylene film prepared by photografting

The effect of monomer concentration on photografting of methacrylic acid (MAA) onto linear low-density polyethylene (PE) film (thickness=30 μm) was investigated at 60 °C in water solvent together with the location of MAA-grafted chains. Xanthone was used as a photoinitiator which was coated on the film sample earlier. The higher percentage of grafting and graft efficiency were afforded for the system with the higher monomer concentration. The resultant MAA-grafted films were subjected to measurements of pH-responsive character and ability to adsorb cupric ion in order to understand the characteristics of function introduced. The grafted samples exhibited the pH-responsive character, where they shrank and swelled in acidic and alkaline media, respectively. The pH-responsive character of the grafted films was higher for the samples prepared in the system with a higher monomer concentration. Moreover, the grafted samples exhibited the ability to adsorb cupric ion, and the ability was reduced when the sample was prepared in the system with a higher monomer concentration. The different extents of the pH-responsive character and ability to adsorb cupric ion of the resulting grafted PE films were discussed in terms of location of grafted chains in the film substrate, which was determined by a scanning electron microscope and an attenuated total reflection infrared spectroscopy.     

γ-Radiolysis of 5-fluorouracil and 5-fluorouridine derivatives having sulfur-containing substituents

γ-Radiolysis reactions of eight 5-fluorouracil (5-FU) derivatives having sulfonyl group-containing substituents at the 1-position and five 5-fluorouridine (5-FUR) derivatives having thioureido group-containing substituents were studied under the conditions where hydrated electron (e_aq^?) and hydroxyl radical (HO·) become the principal reactive species. The 5-FU and 5-FUR derivatives were radiolyzed to give 5-FU and 5-FUR, respectively. The efficiency of the reactions depended upon the nature of reactive species and also upon the nature of substituents. The reactivity features of the γ-radiolysis reactions are discussed.     

Determination of traces of molybdenum in sea water by combined anion-exchange — graphite furnace atomic absorption spectrometry

Summary Traces of molybdenum in sea water have been preconcentrated by anion-exchange from acidified samples in the presence of sodium azide. Molybdenum adsorbs strongly on a column of Bio-Rad AG 1 (Cl^–) and can be stripped easily by elution with 2 mol/l NH₄Cl — 2 mol/l NH₄OH solution. Molybdenum in the effluent is determined by graphite furnace atomic absorption spectrometry. The combined method allows to determine traces of molybdenum in sea water as well as non-saline water on a 100 ml sample basis. The method gives a relative standard deviation of better than 8% at a molybdenum level of 10 g 1^–1 of sea water.

---

Bestimmung von Molybdänspuren in Meereswasser mit Hilfe einer Kombination von Anionenaustausch und elektrothermischer Atomabsorptionsspektrometrie

     

Preparation and characterization of novel polyaryloxydiphenylsilanes with high glass transition temperature by melt polycondensation of dianilinodiphenylsilane with bisphenols

Novel polyaryloxydiphenylsilanes with reduced viscosities of 0.31–0.65 dL/g were obtained by the melt polycondensation of dianilinodiphenylsilane with three bisphenols, 2,2-bis (4-hydroxyphenyl)-1,1,1,3,3,3-hexafluoropropane, 3 (4-hydroxyphenyl)-1,1,3-trimethyl-5-indanol, and 9,9-bis (4-hydroxyphenyl) fluorene, at 200–320°C in vacuo. These polymers are all amorphous and readily soluble in a wide variety of organic solvents such as chlorinated and aromatic hydrocarbons, cyclic ethers, and polar aprotic solvents. Because of their bulky and/or rigid ring structures, polyaryloxydiphenylsilanes containing diphenylhexafluoropropane, phenylindane, and diphenylfluorene units in the main chain have high glass transition temperatures of 106, 112, and 172°C, respectively. They are thermally stable showing almost no weight loss up to 350°C in air. Colorless, transparent, but brittle films are obtained from these polymers by solution casting. Ultraviolet transmission is sharply cut off by these polyaryloxydiphenylsilane films at ca. 300 nm, and the cut-off wavelength depends on the bisphenols used.     

Deuterium relaxation time ofα-d-tryptophan included in cyclodextrin host molecules

Deuterium relaxation times ofd- andl--d-tryptophan included in -cyclodextrin derivatives were directly measured by deuterium NMR spectroscopy. The results showed that the molecular motion of the tryptophan molecule was strongly restricted even in the cavity of unmodified -cyclodextrin and the additional recognition groupings — ammonium and carboxylate — on -cyclodextrin did not affect the molecular motion of tryptophan, though the association constants were significantly enhanced.Deceased on March 22, 1987.     

An atropisomeric M2L4 cage mixture displaying guest-induced convergence and strong guest emission in water

Introduction of atropisomeric axes into a bent bispyridine ligand leads to the quantitative formation of a complex mixture of atropisomeric M₂L₄ cages upon treatment with metal ions. Whereas the isomer ratio of the obtained cage mixture, consisting of up to 42 isomers, is insensitive to temperature and solvent, the quantitative convergence from the mixture to a single isomer is accomplished upon encapsulation of a large spherical guest, namely fullerene C₆₀. The observed isomerization with other guests depends largely on their size and shape (e.g., <10 and 82% convergence with planar triphenylene and bowl-shaped corannulene guests, respectively). Besides the unusual guest-induced convergence, the present cage mixture displays the strongest guest emission (Φ_F = 68%) among previously reported M_nL_m cages and capsules, upon encapsulation of a BODIPY dye in water.

A complex mixture of atropisomeric M₂L₄ cages is shown to undergo perfect convergence to a single isomer upon encapsulation of spherical C₆₀ in water. Moreover, the cage mixture displays very strong guest emission upon encapsulation of a BODIPY dye.     

Control of viscoelasticity using redox reaction

The viscoelasticity of a fluid was tuned with the Faradaic reaction of (11-ferrocenylundecyl)trimethylammonium bromide (FTMA), a "redox-switchable" surfactant. An aqueous solution of the reduced form of FTMA exhibited a remarkable viscoelasticity in the presence of sodium salicylate (NaSal) because of the formation of three-dimensional entanglement of wormlike micelles. Electrolytic oxidation of FTMA caused the viscosity of the system to dramatically decrease and the elasticity to disappear. This drastic decrease in viscoelasticity arose from the disruption of wormlike micelles. This novel electrorheological phenomenon is expected to be applicable to ink for inkjet printers, the electrochemically controlled release of substances entrapped in wormlike micelles of FTMA, and fluid flow rate control using electric signals.     

Anomalous behaviours of protactinium in the acid-leaching experiments on pitchblende

A series of leaching experiments with H₂O, HCl, HNO₂ and HF were carried out on a sample of pitchblende from Africa. Anomalously high²³¹Pa/²³⁵U ratios, which were not accompanied by similar enhancements of²³⁴U/²³⁸U and²³⁵U/²³⁸U ratios, were observed in some uranium fractions. The observed²³¹Pa/²³⁵U ratios varied between the values of 0.035±0.005 and 2,000±300 (Ci/Ci). These results are interpreted as due, primarily, to the difference in the chemical properties of protactinium and uranium, rather than to the alpha-recoil effects.     

Preparation and characterization of modified 3-aminopropylsilyl silica phases with 1,8-naphthalic anhydrides in HPLC

Modified 3-aminopropylsilyl silica stationary phases with 1,8-naphthalic anhydrides [3-(1,8-naphthalimido)propyl (NAIP), 3-(4-amino-1,8-naphthalimido)propyl (4A-NAIP), 3-(3-nitro-1,8-naphthalimido)propyl (3N-NAIP), and 3-(4-nitro-1,8-naphthalimido)propyl modified silyl silica gel (4N-NAIP)] are prepared in a single reaction. Chromatographic properties of these phases are characterized using various solutes including monosubstituted benzenes, alkyl benzenes, and polycyclic aromatic hydrocarbons (PAHs) in high-performance liquid chromatography. Even though the retention in these NAIPs is mainly based on the reversed-phase mode, 3N- and 4N-NAIP show a remarkable recognition toward aromatic hydrocarbons, which is attributed to their strong pi-pi interaction. Furthermore, the recognition ability is according to the molecular planarity and non-linearity of PAHs. Subsequently, 3N- and 4N-NAIP has a distinct selectivity from octadecyl silica and, therefore, will be a valuable alternative for a separation or a solid-phase extraction of aromatic compounds.