Non-glutamate type pyrrolo[2,3-d]pyrimidine antifolates. III. Synthesis and biological properties of N(omega)-masked ornithine analogs

The glutamic acid moiety of N-[4-[3-(2,4-diamino-7H-pyrrolo[2,3-d]pyrimidin-5-yl)propyl]benzoyl]-L-g lutamic acid (1b, TNP-351) and the related compound (1a), was replaced with various N(omega)-acyl-, sulfonyl-, carbamoyl- and aryl-2,omega-diaminoalkanoic acids, and the inhibitory effects of the resulting products (9, 11, 14, 18, 21, 23, 25, 30, 36) on dihydrofolate reductase (DHFR), the growth of murine fibrosarcoma Meth A cells, and methotrexate-resistant human CCRF-CEM cells, were examined. Compounds (9a-f) acylated with a hemiphthaloyl group were efficiently synthesized by coupling pyrrolo[2,3-d]pyrimidine carboxylic acids (7a,b) and N(omega)-phthaloyl 2,omega-diaminoalkanoic acid methyl esters (6a-c) and subsequent hydrolysis. The other N(omega)-acyl- and sulfonyl-ornithine analogs (21, 23, 25) were synthesized by acylation of free amino intermediates (19a,b) derived from tert-butoxycarbonyl-ornithine analogs (17a,b). A free ornithine analog (18) did not strongly inhibit Meth A cell growth, whereas all N(omega)-acyl-, sulfonyl-, carbamoyl- and aryl-ornithine analogs (9, 11, 21, 23, 25, 30, 36) exhibited much more potent inhibitory activities against both DHFR and Meth A cell growth. In particular, compounds 9c, 21k and 36a also showed remarkable growth-inhibitory activities against methotrexate-resistant CCRF-CEM cells. These results demonstrate that the potent inhibitory activities of N(omega)-masked ornithine analogs against the growth of Meth A cells and methotrexate-resistant CCRF-CEM cells, results from effective uptake via reduced folate carrier and their potent DHFR inhibition.     

Control of viscoelasticity using redox reaction

The viscoelasticity of a fluid was tuned with the Faradaic reaction of (11-ferrocenylundecyl)trimethylammonium bromide (FTMA), a "redox-switchable" surfactant. An aqueous solution of the reduced form of FTMA exhibited a remarkable viscoelasticity in the presence of sodium salicylate (NaSal) because of the formation of three-dimensional entanglement of wormlike micelles. Electrolytic oxidation of FTMA caused the viscosity of the system to dramatically decrease and the elasticity to disappear. This drastic decrease in viscoelasticity arose from the disruption of wormlike micelles. This novel electrorheological phenomenon is expected to be applicable to ink for inkjet printers, the electrochemically controlled release of substances entrapped in wormlike micelles of FTMA, and fluid flow rate control using electric signals.     

Self-assembly patterning of colloidal crystals constructed from opal structure or NaCl structure

We developed a novel self-assembly process to fabricate an orderly array of particle wires constructed from a close-packed colloidal crystal without preparation of patterned templates. A substrate was immersed vertically into a SiO2 colloidal solution, and the liquid surface moved downward upon evaporation of solution. Particles formed a mono-/multiparticle layer, which was cut by the periodic drop-off of solution. The orderly array of particle wires was successfully fabricated, showing the suitability of the self-assembly process for the fabrication of nano-/microstructures constructed from nano-/microparticles or blocks. The mechanism of the assembly process and control of thickness, width, and interval of particle wires were further discussed. Moreover, an array of particle wires constructed not from close-packed face-centered cubic (or hexagonal close packed) structure but from two kinds of particles was realized to fabricate an array of particle wires with NaCl structure by this self-assembly process.     

A simple and simultaneous determination of acyclovir and ganciclovir in human plasma by high-performance liquid chromatography

A simple high-performance liquid chromatographic method was developed for the simultaneous determination of the therapeutic levels of acyclovir and ganciclovir in human plasma. After precipitation of plasma proteins with 6% perchloric acid, acyclovir and ganciclovir were simultaneously determined by reversed-phase chromatography with spectophotometric detection at 254 nm. The peak heights for acyclovir and ganciclovir were linearly related to their concentrations ranging from 0.063 to 2.080 micro g/mL. The recovery was 100.48-102.84% for acyclovir and 99.26-103.07% for ganciclovir. The intra- and inter-day relative standard deviation values were in the range 0.186-8.703% for acyclovir and 0.137-6.424% for ganciclovir. The detection limits for both compounds were 0.01 micro g/mL determined as the signal-to-noise ratio of 3. The present method is applicable to therapeutic monitoring during antiviral medication.     

Reversible color changes in lamella hybrids of poly(diacetylenecarboxylates) incorporated in layered double hydroxide nanosheets

The present study is an investigation of a reversible thermal color change induced in lamella hybrids of poly(diacetylenecarboxylates) incorporated in layered double hydroxide (LDH) nanosheets. These poly-[m,n]/LDH hybrids prepared by the photo- or gamma-ray-induced polymerization of diacetylenecarboxylates, i.e., CH(3)(CH(2))(m)()(-)(1)CC-CC(CH(2))(n)()(-)(1)CO(2)(-) (mono-[m,n]), and intercalated in LDH lamella sheets, were observed to develop colors ranging from yellow to blue. The change in color was found to depend greatly on the alkyl carbon numbers of the mono-[m,n] (m,n = 10,11; 5,11; 10,5; 16,1) values. Moreover, the conformational alignment of the mono-[m,n] within the LDH was observed to be a crucial factor in color development, which was greatly affected by the intercalation degrees and extent of poly(ene-yne) linkage elongation of the polymers. For the poly-[m,n]/LDH hybrids investigated, a reversible color change was found to occur repeatedly and remarkably for the poly-[10,11]/LDH hybrid. This color change occurred at temperatures between ca. 20 and 80 degrees C back and forth from purple red to bright orange, in stark contrast to the irreversible color change for poly-[10,11] without LDH. Moreover, DSC and Raman spectroscopic studies of the LDH hybrids showed that the thermochromic temperature corresponded to the phase transition temperature of 80 degrees C. XRD analysis also indicated that the poly-[m,n]/LDH hybrid could retain its lamella structure during such thermochromic color changes, enabling conformational recovery in the polymer chains by a cooling down of the hybrids to temperatures lower than the transition temperature, while the nonhybrid poly-[10,11] powders exhibited an irreversible color change at 60 degrees C, above which the polymer powder turned amorphous.     

Biomimetic oxidation of alcohols by coenzyme PQQ-trimethyl ester

Oxidation of alcohols to corresponding carbonyl compounds by coenzyme PQQ-trimethyl ester was performed in the presence of aluminum t-butoxide or aluminum chloride under anaerobic conditions. Reduced PQQTME (PQQTMEH₂) was obtained by acidification of an aluminum complex of reduced PQQTME which was isolated in the reaction.     

Uranium determination by133Xe in meteorites; comparative study with fission track and/or239Np methods and thermal release character of133Xe

Uranium concentrations in three types of inclusions of the Allende (C III), a bulk sample of the Plainview (H5), and a bulk and 5 to 15 density separates of the Huckitta pallasite were determined and discussed by comparing the results from homogenized fission track and/or²³⁹Np analyses with the¹³³Xe results. Stepwise heating experiment revealed that the¹³³Xe release from the Plainview is bimordal and incomplete by a simple heating at 1600 °C, and that the¹³³Xe releases in the Huckitta bulk and metallic samples are multitudinous but can be extracted rather completely at 1600–1700 °C. In the Huckitta, uranium-rich phase (∼100 ppb) was in the lightest density fraction of d=2.9–3.3, but the bulk uranium was found to be mostly from the heavy metal-rich fraction of d>4.2.     

Recent progress of high-power negative ion beam development for fusion plasma heating

A negative-ion-based neutral beam injector (N-NBI) has been constructed for JT-60U. The N-NBI is designed to inject 500 keV, 10 MW neutral beams using two ion sources, each producing a 500 keV, 22 A D⁻ ion beam. In the preliminary experiment using one ion source, a D⁻ ion beam of 13.5 A has been successfully accelerated with an energy of 400 keV (5.4 MW) for 0.12 s at an operating pressure of 0.22 Pa. This is the highest D⁻ beam current and power in the world. Co-extracted electron current was effectively suppressed to the ratio of Ie/I_D⁻ < 1. The highest energy beam of 460 keV, 2.4 A, 0.44 s has also been obtained. To realize 1 MeV class NBI system for ITER (International Thermonuclear Experimental Reactor), demonstration of ampere class negative ion beam acceleration up to 1 MeV is an important mile stone. To achieve the mile stone, a prototype accelerator and a 1 MV, 1 A test facility called MeV Test Facility (MTF) were constructed. Up to now, an H⁻ ion beam was accelerated up to the energy of 805 keV with an acceleration drain current of 150 mA for 1 s in a five stage electrostatic multi-aperture accelerator.     

Double tracer whole body autoradiography using a short-lived positron emitter and a long-lived beta emitter

We investigated glucose and amino acid metabolism in tumors and other organs using whole body autoradiography with a short-lived positron emitter and a long-lived beta emitter. The radioactive compounds used were 2-deoxy-2-[18F]-fluoro-D-glucose (18F-FDG) with a half life of 109.8 min and L-[methyl-14C]-methionine (14C-MET) with a half life of 5,730 years. A Donryu rat weighing about 150 g was subcutaneously inoculated at the back with experimental tumors of AH109A and AH272. 74 MBq (2 mCi) of 18F-FDG and 740 kBq (20 microCi) of 14C-MET was administered and after 30 min, the rat was sacrificed. Whole body frozen sections were obtained using autocryotome. For the 18F-FDG autoradiogram, the frozen sections were exposed to an X-ray film for 6 h. After seven days, these frozen sections were again exposed to 14C-MET for a week. Cross-contamination was minimized by adjusting the exposure time, the interval of exposures and the administered dose. The accumulation of the tracers was represented as the optical density ratio of the tissue of interest to the muscle. The tumor ratios were 12.5 for 18F-FDG and 8.6 for 14C-MET showing the highest accumulation in the whole body autoradiogram. In contrast the inflammatory tissue ratios were 1.27 for 18F-FDG and 0.77 for 14C-MET showing very low amino acid metabolism. With the present double tracer whole body autoradiogram, 18F-FDG accumulation was seen in the brain and the heart but not to the liver as against 14C-MET accumulation which was seen to the liver but not to the brain and the heart.     

Effects of poly(ethylene glycol) (PEG) concentration on the permeability of PEG-grafted liposomes

Poly(ethylene glycol)-grafted liposomes (PEG-liposomes) were prepared from dipalmitoylphosphatidylcholine (DPPC) with various amounts of distearoyl-N-monomethoxy poly(ethylene glycol)-succinyl-phosphatidylethanolamines (DSPE-PEG) with PEG molecular weights of 1000, 2000, 3000 and 5000. The effects of DSPE-PEG concentration on the permeability of PEG-liposomes were investigated using carboxyfluorescein (CF). In the gel state, the CF leakage from PEG-liposomes was decreased with increasing mole fractions of DSPE-PEG for all PEG molecular weights. In the liquid-crystalline state, the CF leakage from PEG-liposomes containing DSPE-PEG1000 gradually increased with increasing mole fractions of DSPE-PEG, while that of PEG-liposomes whose molecular weight in PEG units was above 2000 rapidly decreased by the addition of DSPE-PEG. Furthermore, no effect of PEG molecular weight on CF leakage was observed. The relationship between the fluorescence polarization of 1,6-diphenyl-1,3,5-hexatriene (DPH) (or 1-(4-trimethylammoniumphenyl)-6-phenyl-1,3,5-hexatriene (TMA-DPH)) and the mole fraction of DSPE-PEG for PEG-liposomes was also investigated. No significant changes in fluorescence polarization of DPH for liposomal bilayer membranes was observed in the gel and liquid-crystalline states due to the addition of DSPE-PEG, while that of TMA-DPH was decreased compared with that of liposomes without DSPE-PEG in both states.