Authenticity assessment of beef origin by principal component analysis of matrix-assisted laser desorption/ionization mass spectrometric data

It has become necessary to assess the authenticity of beef origin because of concerns regarding human health hazards. In this study, we used a metabolomic approach involving matrix-assisted laser desorption/ionization imaging mass spectrometry to assess the authenticity of beef origin. Highly accurate data were obtained for samples of extracted lipids from beef of different origin; the samples were grouped according to their origin. The analysis of extracted lipids in this study ended within 10 min, suggesting this approach can be used as a simple authenticity assessment before a definitive identification by isotope analysis.     

Effect of mono-CDNP substitution of lysine residues on the redox reaction of cytochrome c electrostatically adsorbed on a mercaptoheptanoic acid modified Au(111) surface

The effect of charge-inverting modification of single surface lysine residue on the electron transfer (ET) reaction of horse heart cytochrome c (cyt c) is examined for 12 different types of mono-4-chloro-2,5-dinitrobenzoic acid substituted cyt c (mCDNPc) adsorbed on a Au(111) electrode modified with a self-assembled monolayer (SAM) of 7-mercapto-heptanoic acid (MHA). A negative shift in the redox potential by 10-35 mV as compared to that of native cyt c and a monolayer coverage in the range of 13-17 pmol cm(-2) are observed for electroactive mCDNPc's. The magnitude of the decrease in the ET rate constant (k(et)) of mCDNPc's compared with that of native cyt c depends on the position of the CDNP substitution. For mCDNPc's in which the modified lysine residue is outside of the interaction domain of cyt c with the SAM, the ratio of the k(et) of mCDNPc to that of native cyt c is correlated to the change in the dipole moment vector of cyt c due to the CDNP modification. This correlation suggests that the dipole moment of cyt c determines its orientation of adsorption on the SAM of MHA and significantly affects the rate of the ET. The CDNP modification of lysine residues at the interaction domain significantly decreases the rate, demonstrating the importance of the local charge environment in determining the rate of ET.     

Activation of Dihydrogen by Masked Doubly Bonded Aluminum Species

Activation of dihydrogen by masked dialumenes (Al=Al doubly bonded species) is reported. Reactions of barrelene‐type dialumanes, which have the reactivity as masked equivalents of 1,2‐diaryldialumenes ArAl=AlAr, with H₂ afforded dihydroalumanes ArAlH₂ at room temperature (Ar: bulky aryl groups). These dihydroalumanes form hydrogen‐bridged dimers [ArHAl(μ‐H)]₂ in the crystalline state, while a monomer–dimer equilibrium was suggested in solution. The 1,2‐diaryldialumenes generated from the barrelene‐type dialumanes are the putative active species in the cleavage of H₂.     

High‐Density Liquid‐Crystalline Polymer Brushes Formed by Surface Segregation and Self‐Assembly

High‐density polymer brushes on substrates exhibit unique properties and functions stemming from the extended conformations due to the surface constraint. To date, such chain organizations have been mostly attained by synthetic strategies of surface‐initiated living polymerization. We show herein a new method to prepare a high‐density polymer brush architecture using surface segregation and self‐assembly of diblock copolymers containing a side‐chain liquid‐crystalline polymer (SCLCP). The surface segregation is attained from a film of an amorphous base polymer (polystyrene, PS) containing a minor amount of a SCLCP‐PS diblock copolymer upon annealing above the glass‐transition temperature. The polystyrene portion of the diblock copolymer can work as a laterally mobile anchor for the favorable self‐assembly on the polystyrene base film.     

Stereoselective vinylogous Mukaiyama aldol reaction of α-haloenals

We have developed a high-yielding and stereoselective vinylogous Mukaiyama aldol reaction (VMAR) of α-haloenals. Contrary to the simple α,β-unsaturated aldehyde, α-haloenals were found to be reactive affording the corresponding VMAR adducts in excellent yields. Some transformations of VMAR adducts by Pd-mediated cross-coupling were also examined in order to demonstrate the synthetic utility of VMAR of α-haloenals.     

Aerobic reduction of olefins by in situ generation of diimide with synthetic flavin catalysts

A versatile reducing agent, diimide, can be generated efficiently by the aerobic oxidation of hydrazine with neutral and cationic synthetic flavin catalysts 1 and 2. This technique provides a convenient and safe method for the aerobic reduction of olefins, which proceeds with 1 equiv of hydrazine under an atmosphere of O(2) or air. The synthetic advantage over the conventional gas-based method has been illustrated through high hydrazine efficiency, easy and safe handling, and characteristic chemoselectivity. Vitamin B(2) derivative 6 acts as a highly practical, robust catalyst for this purpose because of its high availability and recyclability. Association complexes of 1b with dendritic 2,5-bis(acylamino)pyridine 15 exhibit unprecedented catalytic activities, with the reduction of aromatic and hydroxy olefins proceeding significantly faster when a higher-generation dendrimer is used as a host pair for the association catalysts. Contrasting retardation is observed upon similar treatment of non-aromatic or non-hydroxy olefins with the dendrimer catalysts. Control experiments and kinetic studies revealed that these catalytic reactions include two independent, anaerobic and aerobic, processes for the generation of diimide from hydrazine. Positive and negative dendrimer effects on the catalytic reactions have been ascribed to the specific inclusion of hydrazine and olefinic substrates into the enzyme-like reaction cavities of the association complex catalysts.     

Efficient partial hydrogenation of trichloromethyl to gem-dichloromethyl groups in platinum on carbon-catalyzed system

While gem-dichloromethyl groups can be directly synthesized by the mono-dechlorination of the corresponding trichloromethyl groups, the suppression control of the over-reduction to form chloromethyl or methyl functionalities is quite difficult. We have established the efficient and widely applicable mono-dechlorination method of the trichloromethyl groups to form the corresponding gem-dichloromethyl groups using platinum on carbon in dimethylacetamide as a specific solvent at 25 °C under a hydrogen atmosphere. The mono-dechlorination of the α,α,α-trichloromethylcarbonyl groups smoothly proceeded by the use of platinum on carbon as a catalyst in a highly chemoselective manner, while the efficient mono-dechlorination of the alkyl- and aryl-trichloromethyl groups required the combined use of Bu₃SnH.     

Stereoselective synthesis of the right-hand segment of tubiferal A

Tubiferal A, a triterpenoid isolated from myxomycete Tubifera dimorphotheca, exhibits a reversal effect of vincristine (VCR) resistance against VCR-resistant KB cell lines. The compound possesses a complex structure involving the 6-7-6-5 polycyclic carbon framework with various functional groups. The stereoselective synthesis of the right-hand segment of tubiferal A was achieved on the basis of the cyclopentene annulation method and the semi-pinacol rearrangement reaction of an epoxy alcohol for constructing the trans-fused 6-5 bicyclic skeleton possessing two quaternary carbon atoms at the angular positions.     

Carboxylic acid recognition of diamidine having a fluorescent 1,8-diphenylanthracene unit and its detection of amidinium-carboxylate and amidinium formation

A diphenylanthracene-based diamidine (1a) fluorescent probe for the detection of dicarboxylic acids has been designed and synthesized, which has an extended π-conjugation rather than a simple anthracene ring, in order to observe highly different fluorescence wavelengths after complex formation with dicarboxylic acids. The fluorescence spectra of the mixed solution of the diamidine 1a and carboxylic acids showed two different fluorescence bands, which corresponded to the complex formation (amidinium-carboxylate formation, λ_em?=?450?nm, light blue color) and dissociated amidinium formation (λ_em?=?510?nm as a broad band, green color). The complexed and dissociated states were confirmed by DOSY NMR and TD-DFT calculations. These different fluorescence wavelengths may come from the differences in the dihedral angles between the phenyl rings at the 1,8-position and anthracene ring (difference in π-conjugation) of 1a under complex formation and dissociated amidinium formation. The proposed mechanism for the observation of the different fluorescence wavelengths (complex formation and amidinium formation) was also confirmed by the fluorescence study of diamidine 1b which causes restricted rotation of the phenyl rings by substitution of the steric methyl groups, and observed the same fluorescence spectra for the complex formation and amidinium formation (400, 420, 450?nm as a vibrational structure of anthracene ring). These fluorescence characteristics of the diamidine 1a are also applicable for the detection of α,ω?dicarboxylic acids.     

Novel method to control release of lipophilic drugs with high potency from silicone

Silicone has been utilized as a carrier material for sustained release system of lipophilic drugs. Extensive studies revealed that drug release rate is influenced by factors such as physicochemical properties of the drug and additives.(1-5)) When a lipophilic drug is highly potent at low concentrations, the drug release rate should be strictly controlled so as to avoid side effects. In this study, using vitamin D(3) (VD(3)) as an example of such drugs, we investigated novel method to suppress initial burst and to modify drug release rate from silicone matrix. As a result, it was found that (a). addition of human serum albumin (HSA) suppressed initial burst and enhanced release rate in the later stage, resulting constant release of VD(3), (b). covering a matrix formulation with a membrane of low diffusivity (core-rod formulation) suppressed initial burst and released drug in a constant rate, and (3) using materials for which the drug has high affinity as dissolution solvent (reservoir formulation), the drug release rate was reduced.