Thermal dehydration of lithium metaborate dihydrate and phase transitions of anhydrous product

Reaction steps and mechanisms of the thermal dehydration of lithium metaborate dihydrate were investigated by means of thermoanalytical measurements, high temperature powder X-ray diffractometry, FT-IR spectroscopy, and microscopic observations. The first half of thermal dehydration was characterized by the melting of the sample producing viscous surface layer, the formation of bubbles on the particle surfaces, and the sudden mass-loss taking place by an opportunity of cracking and/or bursting of the bubble surface layer. The second half of the dehydration with a long-tailed mass-loss process in a wide temperature region was divided further into three distinguished reaction steps by the measurements of controlled rate thermal analysis. During the course of the thermal dehydration, four different poorly crystalline phases of intermediate hydrates were observed, in addition to an amorphous phase produced by an isothermal annealing. Just after completing the thermal dehydration, an exothermic DTA peak of the crystallization of β-LiBO₂ was appeared at around 750 K. The phase transition from β-LiBO₂ to α-LiBO₂ was observed in the temperature range of 800-900 K, which subsequently melted by indicating a sharp endothermic DTA peak with the onset temperature at 1101.4 ± 0.6 K.     

Synthesis of 6-phenyl-5,6,7,8-tetrahydro-4H-1,3,2,6-dioxathiazocine 2-oxides

Four 6-phenyl-5,6,7,8-tetrahydro-4H-1,3,2,6-dioxathiazocine 2-oxides were synthesized by the reaction of the corresponding N,N-bis(2-hydroxyethyl)aniline with thionyl chloride in the presence of triethylamine.     

Synchrotron X-ray structures of cellulose I<Subscript>β</Subscript> and regenerated cellulose II at ambient temperature and 100 K

Synchrotron X-ray data have been collected to 1.4 Å resolution at the NE-CAT beam-line at the Advanced Photon Source from fibers of cellulose I_β and regenerated cellulose II (Fortisan) at ambient temperature and at 100 K in order to understand the effects of low temperature on cellulose more thoroughly. Crystal structures have been determined at each temperature. The unit cell of regenerated cellulose II contracted, with decreasing temperature, by 0.25%, 0.22% and 0.1% along the a, b, and c axes, respectively, whereas that of cellulose I_β contracted only in the direction of the a axis, by 0.9%. The value of 4.6×10^?5 K^?1 for the thermal expansion coefficient of cellulose I_β in the a axis direction can be explained by simple harmonic molecular oscillations and the lack of hydrogen-bonding in this direction. The molecular conformations of each allomorph are essential unchanged by cooling to 100 K. The room temperature crystal structure of regenerated cellulose II is essentially identical to the crystal structure of mercerized cellulose II.     

Enantiodifferentiating photoaddition of alcohols to 1,1-diphenylpropene in supercritical carbon dioxide: sudden jump of optical yield at the critical density

In the enantiodifferentiating photoaddition of ROH (R = Me, Et, i-Pr) to 1,1-diphenylpropene sensitized by fructosyl 1,4-naphthalenedicarboxylate in supercritical carbon dioxide, the enantiomeric excess of photoadduct increased with increasing bulkiness of the alcohol at all pressures used, with an accompanying sudden jump at the critical density, for which the enhanced clustering of alcohol, particularly in the subcritical pressure region, was revealed to be responsible from the fluorescence spectral examinations.     

High magnetic field solid‐state NMR analyses by combining MAS,MQ‐MAS,homo‐nuclear and hetero‐nuclear correlation experiments

A general strategy of structural analysis of alumina silicate by combining various solid‐state NMR measurements such as single pulse, multi‐quantum magic angle spinning, double‐quantum homo‐nuclear correlation under magic angle spinning (DQ‐MAS), and cross‐polarization hetero‐nuclear correlation (CP‐HETCOR) was evaluated with the aid of high magnetic field NMR (800 MHz for ¹H Larmor frequency) by using anorthite as a model material. The high magnetic field greatly enhanced resolution of ²⁷Al in single pulse, DQ‐MAS, and even in triple‐quantum magic angle spinning NMR spectra. The spatial proximities through dipolar couplings were probed by the DQ‐MAS methods for homo‐nuclear correlations between both ²⁷Al–²⁷Al and ²⁹Si–²⁹Si and by CP‐HETCOR for hetero‐nuclear correlations between ²⁷Al–²⁹Si in the anorthite framework. By combining various NMR methodologies, we elucidated detailed spatial correlations among various aluminum and silicon species in anorthite that was hard to be determined using conventional analytical methods at low magnetic field. Moreover, the presented approach is applicable to analyze other alumina‐silicate minerals. Copyright © 2012 John Wiley & Sons, Ltd.     

Synthesis of well‐defined block copolymer composed of flexible amphiphilic poly(ethylene glycol) and hydrophobic liquid crystalline segments by living coordination polymerization of allene derivatives and its application to thin film with perpendicularly oriented cylindrical nanostructure

A block copolymer composed of a flexible polar poly(ethylene glycol) (PEG) and a less polar liquid crystalline poly(allene) segments is prepared by the living coordination polymerization of an allene derivative possessing trans‐azobenzene‐containing mesogenic substituent by the use of a π‐allylnickel macroinitiator bearing PEG segment. The thin film of the block copolymer is prepared by the spin coating of its solution onto mica or silicon wafer which proves to possess perpendicularly oriented nanocylindrical microphase separated structures as supported by the differential calorimetric, polarized optical microscopic, grazing‐incidence small‐angle X‐ray scattering, transmission electron microscope, and atomic force microscope measurements.     

Structures and Reaction Mechanism of Novel Metal-Carbene Complexes Derived from Hypervalent Diazadiselenathiapentalenes

Abstract

Novel metal-carbene complexes (4) with a metallapentalene framework have been obtained from hypervalent diazadiselenathiapentalenes (3) by treating with Pt(PPh₃)₄, Pd(PPh₃)₄ and RhCl(PPh₃)₃. X-Ray investigations revealed that the central hypervalent sulfur atom in 3 was substituted by a metal atom to form M-Se bonds in the resultant metallapentalene framework.