Solid‐Phase Synthesis of a Combinatorial Methylated (±)‐Epigallocatechin Gallate Library and the Growth‐Inhibitory Effects of these Compounds on Melanoma B16 Cells

We report on the solid‐phase synthesis of a combinatorial methylated (±)‐epigallocatechin gallate (EGCG) library and its biological evaluation. Epigallocatechin gallate (EGCG) and its methylated derivatives, which are members of the catechin family, exhibit various anti‐cancer effects. The solid‐phase synthesis of methylated EGCG involves the preparation of the α‐acyloxyketone by the coupling of a solid‐supported aldehyde with a ketone and an acid. The subsequent release and reductive etherification reaction of the solid‐supported α‐acyloxyketone provide the protected EGCG in good total yields. Sixty‐four methylated EGCGs were successfully prepared. The growth‐inhibitory effects of the methylated EGCG library were also examined. Although methylation of EGCG generally causes reduced growth inhibition, the growth‐inhibitory effect of 7‐OMe EGCGs was comparable to that of EGCG. The 7‐OMe EGCGs are attractive drug candidates because of their enhanced bioavailability.     

High dispersion and fluorescence of anthracene doped in polyphenylsiloxane films

Phenylsilsesquioxane-diphenylsiloxane glass thick films doped with anthracene were prepared from homogeneous coating sols obtained from two different approaches. One approach consisted in incorporating the dye during the glass preparation (which implies the incorporation of the dye in an aqueous media). The doped-glass was further dissolved in the solvents mixture composed of cyclohexane and acetone. The other approach which is non-aqueous consisted simply in dissolving directly the preformed non-doped polyphenylsiloxane glass in the dye solutions. The stability of the organic-inorganic hybrid glass matrix in most organic solvents makes possible the incorporation of the dye without problems of miscibility and dispersion in the hybrid matrix. The coating was performed at room temperature using spin-coating technique prior to further heat-treatment. Crack-free and homogeneous films of high optical quality were obtained. The optical properties of the doped films based on their absorption and emission spectra were discussed owing the incorporation route of the dye. The results showed that the non-aqueous approach used to incorporate the dye minimizes the dye aggregation. This property associated to the preparation route permits to obtain optically active hybrid films loaded with high concentrations of anthracene (in the order of 10⁻² M) which enhance the fluorescence of the doped films. The hybrid doped-films obtained represent therefore a tremendous potential for applications in the field of optics and photonics including the development of new nonlinear optical materials. Bouzid Menaa and Masahide Takahashi both the author contributed equally.     

Nanoscopic Imaging of meso‐Tetraalkylporphyrins Prepared in High Yields Enabled by Montmorrilonite K10 and 3 Å Molecular Sieves

We have developed a high‐yielding synthesis of meso‐tetraalkylporphyrins, which previously have been obtained only in lower yields. By employing Montmorrilonite K10 as the acid catalyst and 3 Å molecular sieves as the dehydrating agent, yields that reached 70 % could be achieved with some aliphatic aldehydes. The free‐base porphyrins with decyl ( C10 ) or longer chains were imaged at the single‐molecule level at the solvent/surface interface. Highly oriented pyrolytic graphite (HOPG) was used as a π‐stacking surface, whereas 1‐phenyloctane and 1‐phenylnonane were used as solvents. An odd–even effect was observed from C13 to C16 . For C13 a single‐crystal X‐ray structure allowed an unprecedented insight into how packing from two dimensions is expanded into a three‐dimensional crystal lattice.     

Preparation of trifluoromethylated pyrazoles and 1,4-thiazine 1,1-dioxides from trifluoromethylated sulfone derivatives

Trifluoromethylated sulfones, 3-amino-2-arylsulfonyl-4,4,4-trifluoro-3-hydroxybutanenitrile ( 3 ) and 3-(aroylmethyl)sulfonyl-1,1,1-trifluoropropane-2,2,-diols 12 , were prepared and cyclized to 4-arylsulfonyl-5-trifluoromethyl-3-hydrazinopyrazoles 9 and 5-arylsulfonyl-3-trifluoromethyl-3-hydroxy-2,3-dihydro-4H-1,4-thiazine 1,1-dioxides 13 , respectively.     

Pair Distribution Function from Liquid Jet Nanoparticle Suspension using Femtosecond X-ray Pulses

X-ray scattering data measured on femtosecond timescales at the SACLA X-ray Free Electron Laser (XFEL) facility on a suspension of HfO₂ nanoparticles in a liquid jet were used for pair distribution function (PDF) analysis. Despite a non-optimal experimental setup resulting in a modest Q_max of ~8 Å⁻¹, a promising PDF was obtained. The main features were reproduced when comparing the XFEL PDF to a PDF obtained from data measured at the PETRA III synchrotron light source. Refining structural parameters such as unit cell dimension and particle size from the XFEL PDF provided reliable values. Although the reachable Q_max limited the obtainable information, the present results indicate that good quality PDFs can be obtained on femtosecond timescales if the experimental conditions are further optimized. The study therefore encourages a new direction in ultrafast structural science where structural features of amorphous and disordered systems can be studied.     

All-solid-state Fluoride Ion-selective Electrode using LaF3 Single Crystal with Poly(3,4-ethylenedioxythiophene) as Solid Contact Layer

An all-solid-state fluoride ion-selective electrode (ISE) was prepared using LaF₃ single crystal with poly(3,4-ethylenedioxythiophene (PEDOT) as the solid contact layer. In contrast to polymer-based ISEs, crystalline membrane-based ISEs have not been used for all-solid-state device, thereby prohibiting the integration of ISEs on a chip. The all-solid-state fluoride ISE developed in this study exhibited superior sensitivity (−56.0±0.9 mV/dec) and selectivity compared to those of conventional inner filling solution ISE. The effects of PEDOT as a solid contact layer were analyzed using chronopotentiometry and electrochemical impedance spectroscopy, which revealed that PEDOT promoted electrode stability. The all-solid-state device can miniaturize the fluoride ISE and facilitate environmental, industrial, agricultural, and physiological monitoring.     

Akaike's Information Criterion for Stoichiometry Inference of Supramolecular Complexes

“How do we decide the stoichiometry of host–guest complexes?” This question has long been answered by the Job plot since its first report in 1928. However, as the Job plot was claimed to be misleading in 2016, the question became an open question again and called for renewed investigations. An information-theoretic approach, called Akaike's information criterion, is introduced in this study to select the best model of host–guest complexes, which can rank the models with weight of evidence. A few test cases with unique cylindrical hosts were examined to demonstrate the applicability of the information-theoretic method. Consequently, reasonable views over the thermodynamic behaviors of dumbbell-and-cylinder complexes were obtained. Akaike's information criterion can be a useful and superior alternative to statistical null hypothesis testing, which was proposed as a remedy in place of the Job plot.     

Ionic Liquids as Organocatalysts and Solvents for Lignocellulose Reactions

Ionic liquids (ILs) are the only media that can allow the homogeneous organocatalytic reactions of lignocellulosic biomass (lignocellulose), since the designability of their cations and anions offers the dual functions of solubility and catalytic activity. This review provides an account of our recent achievements in the organocatalytic approaches for converting lignocellulose into polymer materials based on the principles of IL design that we have originally established. These methodologies include the simple and mild chemical modification of cellulose and lignin under high conversions, with high selectivity, and/or with efficient atom economy. Similar reactions and subsequent fractionation processes are applied to lignocellulose, and a highly productive reaction system is developed using a twin-screw extruder that is specific to the IL media.     

Nickel-Catalyzed Reductive Allyl−Aryl Cross-Electrophile Coupling via Allylic C−F Bond Activation

Nickel-catalyzed reductive cross-coupling of allylic difluorides with aryl iodides was achieved via allylic C−F bond activation. Based on this protocol, a series of γ-arylated monofluoroalkenes were synthesized in moderate to high yields with high Z-selectivities. Mechanistic studies suggest that the C−I bonds of the aryl iodides and the C−F bonds of the allylic difluorides were cleaved via oxidative addition and β-fluorine elimination, respectively, where the oxidative addition of less reactive C−F bonds was avoided to permit their transformation.     

Synchrotron X-ray Electron Density Analysis of Chemical Bonding in the Graphitic Carbon Nitride Precursor Melamine

Melamine is a precursor and building block for graphitic carbon nitride (g-CN) materials, a group of layered materials showing great promise for catalytic applications. The synthetic pathway to g-CN includes a polycondensation reaction of melamine by evaporation of ammonia. Melamine molecules in the crystal organize into wave-like planes with an interlayer distance of 3.3 Å similar to that of g-CN. Here we present an extensive investigation of the experimental electron density of melamine obtained from modelling of synchrotron radiation X-ray single-crystal diffraction data measured at 25 K with special focus on the molecular geometry and intermolecular interactions. Both intra- and interlayer structures are dominated by hydrogen bonding and π-interactions. Theoretical gas-phase optimizations of the experimental molecular geometry show that bond lengths and angles for atoms in the same chemical environment (C−N bonds in the ring, amine groups) differ significantly more for the experimental geometry than for the gas-phase-optimized geometries, indicating that intermolecular interactions in the crystal affects the molecular geometry. In the experimental crystal geometry, one amine group has significantly more sp³-like character than the others, hinting at a possible formation mechanism of g-CN. Topological analysis and energy frameworks show that the nitrogen atom in this amine group participates in weak intralayer hydrogen bonding. We hypothesize that melamine condenses to g-CN within the layers and that the unique amine group plays a key role in the condensation process.