High physisorption affinity of water molecules to the hydroxylated aluminum oxide (001) surface

The adsorption mechanism of water on the hydroxylated (001) plane of α-Al(2)O(3) was studied by measuring adsorption isotherms and GCMC simulations. The experimental adsorption isotherms for three α-Al(2)O(3) samples from different sources are typical type II, in which adsorption starts sharply at low pressures, suggesting a high affinity of water to the Al(2)O(3) surface. Water molecules are adsorbed in two registered forms (bilayer structure). In the first form, water is registered at the center of three surface hydroxyl groups by directing a proton of the water. In the second form, a water molecule is adsorbed by bridging two of the first-layer water molecules through hydrogen bonding, by which a hexagonal ring network is constructed over the hydroxylated surface. The network domains are spread over the surface, and their size decreases as the temperature increases. The simulated adsorption isotherms present a characteristic two-dimensional (2D) phase diagram including a 2D critical point at 365K, which is higher than that on the hydroxylated Cr(2)O(3) surface (319 K). This fact substantiates the high affinity of water molecules to the α-Al(2)O(3) surfaces, which enhances the adsorbability originating from higher heat of adsorption. The higher affinity of water molecules to the α-Al(2)O(3) (001) plane is ascribed to the high compatibility of the crystal plane to form a hexagonal ring network of (001) plane of ice Ih.     

A "non-sticky" superhydrophobic surface prepared by self-assembly of fluoroalkyl phosphonic acid on a hierarchically micro/nanostructured alumina gel film

A hierarchically micro/nanostructured alumina gel film was prepared by using a simple sol-gel process; upon self-assembly of fluoroalkyl phosphonic acid, a "non-sticky" superhydrophobic surface was obtained.     

Frequency response of sloshing in an annular cylindrical tank subjected to pitching excitation

Frequency responses of stable planar and rotary motions in a partially filled annular cylindrical tank, subjected to a pitching excitation at a frequency in the neighborhood of the lowest resonant frequency, are investigated. The nonlinearity of the liquid surface oscillation and the nonlinear coupling between the dominant modes and other modes (e.g., an axisymmetric mode) are considered in the response analysis of the sloshing motion. The basic equations of the liquid motion are derived by using the variational principle and the nonlinear equations of motion of the liquid surface displacement are formulated. The characteristics of the liquid motion in an annular cylindrical tank are discussed. The equations governing the amplitude of the stable planar and rotary liquid motions are derived and the stability of each motion is analyzed. An experiment was carried out using a model tank. It is shown that the nonlinear characteristic of the liquid motion in an annular cylindrical tank is more complicated than that in a circular cylindrical tank. Furthermore, it is shown that the nonlinear analysis is important for estimating the sloshing responses.     

Functional multineuron calcium imaging for systems pharmacology

Functional multineuron calcium imaging (fMCI) is a large-scale technique used to access brain function on a single-neuron scale. It detects the activity of individual neurons by imaging action potential-evoked transient calcium influxes into their cell bodies. fMCI has recently been used as a high-throughput research tool to examine how neuronal activity is altered in animal models of brain diseases, for example stroke, Alzheimer’s disease, and epilepsy, and to estimate how pharmacological agents act on normal and abnormal states of neuronal networks. It offers unique opportunities to discover the mechanisms underlying neurological disorders and new therapeutic targets.     

Photo‐alignment material with azobenzene‐functionalized polymer linked in film

Application of a new azo‐polymer as a photo‐alignment material for liquid crystals (LCs) was demonstrated. 4‐(Vinyloxyethyloxy)azobenzene (VAZO), which has thermally reactive vinyl ether groups, reacted with the ? OH groups of poly(4‐hydroxystyrene) (PHS) during the baking process. The azo‐attached polymer (PHS‐VAZO) film showed anisotropic spectra after exposure to 365‐nm linear polarized light (LPL) unlike the VAZO‐doped poly(methylmethacrylate) (PMMA) film. The anisotropy of the film was small at high concentration of the azo‐chromophore because of thermal randomization of the polarized state. In the evaluation of photo‐alignment of the LC, the LC hybrid cell using the PHS‐VAZO film achieved high LC alignment. The azo‐attached polymer using the thermal reaction of vinyl ethers is useful for a photo‐alignment material. Copyright © 2002 John Wiley & Sons, Ltd.     

Novel silver‐loaded semi‐interpenetrating polymer network gel films with antibacterial activity

Novel semi‐interpenetrating polymer networks (SIPNs) based on segmented polyurethane‐urea and poly(N‐isopropylacrylamide‐co‐acrylic acid‐co‐butylmethacrylate) (poly(NIPAM‐co‐AA‐BMA)) were synthesized for the fabrication of silver nanoparticles (AgNPs) in the SIPN system that could be useful for wound dressing applications. The obtained SIPN films, after neutralization, showed high swelling in aqueous environments and good mechanical properties in both dry and hydrated states. Analysis of the dried SIPN films by differential scanning calorimetry and dynamic viscoelastic measurements revealed the presence of crosslinked copolymers as well as homopolymers in the SIPN system. The neutralized swollen SIPN film coordinated with the silver ions (Ag⁺) that were incorporated into it. AgNPs were subsequently formed by the reduction of Ag⁺. The formation of AgNPs was characterized by UV‐visible spectroscopy, atomic force microscopy, wide‐angle X‐ray diffraction, and thermogravimetric analysis (TGA). Bactericidal activity tests revealed a distinct zone of microbial inhibition within and around the silver‐doped SIPN films. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4950–4962, 2009     

Application of photopolymer to core‐hair type microgels with various hair length

The new microgels, called “core‐hair” type microgels, were synthesized. They have a hair moiety consisting of the oxyhexano‐1,7‐diyl (? O? (CH₂)₅? C(O)? ) group as a spacer and the acryloyl group for polymerization. The hair length depends on the number of spacer units, and affects the viscosity and the thixotropy index of the microgel. These core‐hair microgels show the pseudo‐plastic flow of a non‐Newtonian fluid with moderate to high dispersibility in water or alcoholic solvents. Due ­to their viscosities and dispersibilities, these core‐hair microgels are useful for photopolymer, e.g. for screen printing. Therefore, these microgels were actually applied to screen printing and confirmed pattern forming on a screen printing plate through water development. We now discuss the relation between the viscosity, the dispersibility, the photosensitivity, and the rate of photopolymerization to the hair length of the microgel. Copyright © 2001 John Wiley & Sons, Ltd.     

Fundamental studies on laser radiation therapy: dispersion of a laser beam passing through optical fibres

For laser internal therapy in medical applications, optical fibres are required to propagate the laser beam. The far-field pattern of the laser beam at the exit face of the optical fibre is studied using a multimode step-index fibre and a graded index Selfoc fibre. The degree of dispersion, or the output angular distribution, of the beam passing through the Selfoc fibre is much smaller than that passing through the multimode step-index fibre. Consequently, the energy density in the far-field pattern of the beam passing through the Selfoc fibre is very much larger than that for the beam passing through the multimode step-index fibre. It is concluded that the Selfoc fibre is more effective in laser internal therapy.