On the selection of the optimal plasticizer for calix[n]arene-based ion-selective electrodes: Possible correlation between the ion selectivity and the ‘softness’ of the plasticizer

A criterion for the selection of a suitable plasticizer for calix[n]arene-based ion-selective electrodes is discussed. The cation selectivity of plasticized membranes without the ligand was first measured as a reference. The membranes can be roughly classified into two groups. The first group shows cation selectivity in the order Cs⁺+>K⁺>Na⁺>Li⁺. The membranes in the second group are made of phosphorus plasticizers, which show a selectivity in the reverse order. The plasticizers in the first group featured a linear relationship between the dipole moment of the plasticizer (calculated by a PM3 method) and the ratio of cesium selectivity to lithium selectivity. The linear relationship supports the view that the polar membrane which includes a soft plasticizer with a large dipole moment shows selectivity for Cs⁺, whereas the nonpolar membrane including the soft plasticizer with the small dipole moment shows much lower selectivity for Cs⁺. Next, 2-fluorphenyl-2-nitrophenyl ether (FPNPE) which showed the highest Cs⁺ selectivity and tris(2-ethylhexyl)phosphate (TEHP) which showed the highest Li⁺ selectivity were mixed in an appropriate ratio to make membranes with a different affinity for hard ions. The metal selectivities of several crown-based and calixarene-based ionophores were examined in these membranes. Although a few exceptions exist, the polar soft membrane is favorable when the interfering metal ion is hard, whereas the hard membrane is favorable when the interfering metal ion is soft.     

Total Synthesis of the 7,10‐Epimer of the Proposed Structure of Amphidinolide N,Part II: Synthesis of C17–C29 Subunit and Completion of the Synthesis

The total synthesis of 7,10‐epimer of the proposed structure of amphidinolide N was accomplished. The requisite chiral C17–C29 subunit was assembled stereoselectively via Keck allylation, Shi epoxidation, diastereoselective 1,3‐reduction, and a later oxidative synthesis of the THF framework. The C1–C13 and C17–C29 subunits were successfully coupled using a Enders RAMP “linchpin” as the C14–C16 three carbon unit, thereby controlling the chirality at C14 and C16. The labile allyl epoxy moiety was successfully constructed by Grieco–Nishizawa olefination at a final stage of the synthesis.     

Syntheses, crystal and solution structures, ligand-exchange, and ligand-coupling reactions of mixed pentaarylantimony compounds

All possible combinations of mixed pentaarylantimony compounds bearing p-methylphenyl and p-trifluoromethylphenyl groups were synthesized; ArnTol5-nSb (n=0-5: Ar=p-CF3C6H4, Tol=p-CH3C6H4): Tol5Sb (1), ArTol4Sb (2), Ar2Tol3Sb (3), Ar3Tol2Sb (4), Ar4TolSb (5), and Ar5Sb (6). Compounds 2-5 are the first well-characterized examples of mixed acyclic pentaarylantimony species. The structures of 2-6 were determined by X-ray crystallography to feature trigonal-bipyramidal (TBP) geometry with the more electronegative p-trifluoromethylphenyl substituents selectively occupying the apical positions. Consideration of the chemical shifts of the ipso carbons of the aryl and tolyl groups suggested that the solution structures of 1-6 were also TBP, although their pseudorotation could not be frozen even at -80 degrees C. Ligand-exchange reactions (LERs) took place between 1 and 6 at approximately 60 degrees C in [D6]benzene and all six species 1-6 were found in the equilibrium mixture. The relative stabilities of 1-6 were determined quantitatively by comparison of the observed molar ratios of 1-6 in equilibrium with calculated statistical molar ratios, and Ar2Tol3Sb (3) was found to be the most stable. The ligand-coupling reactions (LCRs) of 2-5 in solution were greatly accelerated by adding Cu(acac)2 or Li+TFPB- (TFPB: [3,5-(CF3)2 C6H3]4 B), whereby the rate becomes comparable to the LER. The use of flash vacuum thermolysis (FVT) allowed the LCR to occur with very little ligand-exchange; the exception ArTol4Sb had very fast ligand-exchange. The selectivities of the LCRs were calculated from the yield of the biaryls synthesized by using FVT. These results were highly consistent with reactions catalyzed in solution, in which bitolyl was not obtained at all. The experimental results suggested that the LCR of pentaarylantimony compounds proceeds in the manner of apical-apical coupling.     

Nagelamide J, a novel dimeric bromopyrrole alkaloid from a sponge Agelas species

A novel dimeric bromopyrrole alkaloid, nagelamide J (1), with antimicrobial activity has been isolated from an Okinawan marine sponge Agelas species, and the structure and stereochemistry were elucidated from spectroscopic data. Nagelamide J (1) is the first bromopyrrole alkaloid possessing a cyclopentane ring fused to an amino imidazole ring.     

A hexagonal prismatic porphyrin array: synthesis, STM detection, and efficient energy hopping in near-infrared region

A belt-shaped hexagonal cyclic porphyrin array 2 that comprises of six meso-meso, beta-beta, beta-beta triply linked diporphyrins 3 bridged by 1,3-phenylene spacers is prepared by oxidation from cyclic dodecameric array 1 consisting of six meso-meso directly linked diporphyrins 4 with DDQ and Sc(OTf)3. The absorption spectrum of 2 is similar to that of the constituent subunit 3 but shows a slight red-shift for the Q-bands in near-infrared (NIR) region, indicating the exciton coupling between the neighboring diporphyrin chromophores. Observed total exciton coupling energies in the absorption spectra were largely matched with the calculated values based on point-dipole exciton coupling approximation. It was found that the experimental exciton coupling strength (292 cm(-1)) of the Q-band in 2 is slightly larger than the calculated one (99 cm(-1)), indicating that the electronic communications are enhanced through 1,3-phenylene linkers in hexameric macromolecule. A rate of the excitation energy hopping (EEH) that occurs in 2 at the lowest excited singlet state in the near-infrared region has been determined to be (1.8 ps)(-1) on the basis of the pump-power dependent femtosecond transient absorption (TA) and the transient absorption anisotropy (TAA) decay measurements. The 2 times faster EEH rate of 2 than that of 1 (4.0 ps)(-1) mainly comes from involving through-bond energy transfer among diporphyrin subunits via 1,3-phenylene bridges as well as F?rster-type through-space EEH processes. STM measurement of 2 in the Cu(100) surface revealed that it takes several discrete conformations with respect to the relative orientation of neighboring diporphyrins. Collectively, an effective EEH in the NIR region is realized in 2 due largely to the intensified oscillator strength in the S(1) state (Q-band) and the close proximity held by 1,3-phenylene spacers.     

Metal‐Free Enantioselective Oxidative Arylation of Alkenes: Hypervalent‐Iodine‐Promoted Oxidative C−C Bond Formation

The enantioselective oxyarylation of (E)‐6‐aryl‐1‐silyloxylhex‐3‐ene was achieved using a lactate‐based chiral hypervalent iodine(III) reagent in the presence of boron trifluoride diethyl etherate. The silyl ether promotes the oxidative cyclization, and enhances the enantioselectivity. In addition, the corresponding aminoarylation was achieved.     

Computational insights into octyl-D-xyloside isomers towards understanding the liquid crystalline structure: physico-chemical features

We applied density functional theory to study octyl-D-xyloside isomers in order to explain the features responsible for the liquid crystal mesophases. Compared to a glucoside, the xylose headgroup has a proton instead of the hydroxymethyl group on C5. Thus, a xyloside has a reduced headgroup volume that renders it less hydrophilic. Our results have shown that the xylose headgroup may adopt stable pyranose and furanose conformations, which may lead to different effective headgroup hydrophilicities. These features are probably responsible for forming two non-equivalent inverse micelles, which are self-assembled into a cubic discontinuous phase with a space group of Fd3m commonly found for xylosides. While different factors are responsible for controlling the relative stability of each isomer, the role of intramolecular hydrogen bonding was highlighted for the investigated single molecule. The polarisable continuum model was used to take into account the solvent effect in order to understand the molecular behaviour in very polar systems. Results from calculations carried out in gas phase were used for comparative purposes. The molecular electrostatic potential calculations for these xylolipids demonstrate sugar amphoterism, which is implicated in the heterogeneity nature of lipid self-assembly.     

Plutonium isotopes in the surface air in Japan: Effect of Chernobyl accident

Plutonium isotope concentrations in the surface air at Tsukuba, Japan are reported during the period from 1981 to the end of 1986. The^239,240Pu concentration in the surface air, which showed a marked seasonal variation with a spring maximum and fall minimum, decreased until the end of 1985 according to the stratospheric residence time of 1.15 years. In May 1986, elevated^239,240Pu concentrations with high²³⁸Pu/^239,240Pu activity ratios were observed. The serial trend of plutonium concentration in the surface air is similar to the concentrations of the Chernobyl-released radionuclides. These findings suggest that a significant part of the plutonium in the surface air in May 1986 was due to the Chernobyl fallout. The size distribution of plutonium bearing particles indicates that plutonium isotopes were mechanically released in the Chernobyl accident. The surface air concentration of plutonium from the Chernobyl accident was much lower than the concentrations of the volatile fission products, and increased the monthly mean^239,240Pu concentration by only 0.03 Bqm^–3.