Mononuclear Ca(II)-bulky aryl-phosphate monoanion and dianion complexes with ortho-amide groups

Two new mononuclear Ca(II) complexes with aryl dihydrogen phosphate ligands having two strategically oriented bulky amide groups, 2,6-(Ph3CCONH)2C6H3OPO3H2 (1), including one with a phosphate monoanion, (NMe4)[CaII[O2P(OH)OC6H3-2,6-(NHCOCPh3)2]3(NCMe)3] (3), and one with a phosphate dianion, [CaII[O3POC6H3-2,6-(NHCOCPh3)2](H2O)3(MeOH)2] (4). Both are analogues for the NH...O hydrogen bonds in the active site of Ca(II)-containing phosphotransferase. Crystallographic studies of these Ca(II) complexes revealed that the amide NHs are directed to uncoordinated O atoms of the phosphates, and the IR and 1H NMR spectra indicate that strong NH...O hydrogen bonds are formed only in the phosphate dianion state. The ligand exchange reaction of 3 with a non-hydrogen-bonded phosphate ligand shows that the NH...O hydrogen bonds prevent the Ca-O bond from dissociation. A scatter plot analysis comparing the distance of a Ca-O bond with the Ca-O-P angle, the Fourier density analysis, and DFT calculations reveal that a partial degree of covalency in the Ca-O(phosphate) bonds is present.     

Fourth-order Raman spectroscopy of wide-band gap materials

Low-frequency surface vibrations were observed on a rutile TiO(2)(110) surface covered with trimethyl acetate (TMA) by using fourth-order Raman spectroscopy. The TMA-covered surface interfaced to air was irradiated with 18-fs light at a wavelength of 630 nm. A pump pulse excited vibrational coherence of Raman-active modes and a probe pulse interacts with the coherently excited surface to generate second harmonic light (315 nm), the intensity of which oscillated as a function of the pump-probe delay. Four bands were recognized at 180, 357, 444, and 826 cm(-1) in the Fourier transformation spectrum of the oscillation and assigned to bulk phonons modified by the presence of the surface boundary condition. The Raman transition for the pump was nonresonant to the band gap excitation of TiO(2), as evidenced by the oscillation phase relative to the pump irradiation and by the oscillation amplitude as a function of the pump power. The observable range of this surface-selective spectroscopy is extended to wide-band gap materials on which one-photon resonance enhancement of the Raman-pump efficiency cannot be expected.     

Formation of microstructured silicon surfaces by electrochemical etching using colloidal crystal as mask

Silicon disk arrays and silicon pillar arrays with a close-packed configuration having an ordered periodicity were fabricated by the electrochemical etching of a silicon substrate through colloidal crystals used as a mask. The colloidal crystals were directly prepared by the self-assembly of polystyrene particles on a silicon substrate. The transfer of a two-dimensional hexagonal array of colloidal crystals to the silicon substrate could be achieved by the selective electrochemical etching of the exposed silicon surfaces, which were located in interspaces among adjacent particles. The diameter of the tip of the silicon pillars could be controlled easily by changing the anodization conditions, such as current density and period of electrochemical etching.     

Ordered nanopore boring in silicon: Metal-assisted etching using a self-aligned block copolymer Au nanoparticle template and gravity accelerated etching

Metal-assisted etching into Si (1 0 0) surfaces can be performed in a highly defined and regular arrangement using self-organized patterns of single-size gold catalyst particles that are block polymer templated on Si surfaces. We show that small size catalyst particles (diameter ≈10 nm) can be forced to maintain straight etch tracks perpendicular to the surface using adequate centrifugal gravity force. This allows the creation of highly ordered uniform and synchronized pore boring into the substrate with single pore diameters in the 10 nm range.     

Photoinduced switching of intramolecular hydrogen bond between amide NH and carboxyl oxygen

In this study, we synthesized two novel carboxylic acid and carboxylate compounds, both of which had an amide group linked with an azomethine moiety to introduce photoinduced switching of the intramolecular NH...O hydrogen bond. We suggest that the cis-carboxylate compound forms a stronger intramolecular NH...O hydrogen bond than the cis-carboxylic acid compound.     

Freshwater-durable and marine-degradable cellulose nanofiber reinforced starch film

Cellulose - Cellulose can replace single-use petrochemical packaging; however, its lack of freshwater durability restricts its applicability. This study used a wet pulverization process to prepare...     

Direct antigen detection from immunoprecipitated beads using matrix-assisted laser desorption/ionization time-of-flight mass spectrometry; a new method for immunobeads-mass spectrometry (iMS)

One-step detection of biological molecules is one of the principal techniques for clinical diagnosis, and the potential of mass spectrometry for biomarker detection has been a promising new approach in the field of medical sciences. We demonstrate here a new and high-sensitivity method that we termed immunobeads-mass spectrometry (iMS), which combines conventional immunoprecipitation and matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS). The key feature of iMS is the MS-compatible condition of immunoprecipitation using detergents with a monosaccaride-C8 alkyl chain or a disaccharide-C10 alkyl chain, and the minimized number of steps required for high-sensitivity detection of target peptides in serum or biological fluid. This was achieved by optimizing the wash buffer and subjecting the immunobeads directly to MALDI-TOF MS analysis. Using this method, we showed that 1 fmol of amyloid beta peptide spiked in serum was readily detectable, demonstrating the powerful tool of iMS as a biomarker detection method.     

Semi-aligned rank tests

Summary The distribution-free test based on semi-aligned rankings for no treatment effects in a two-way layout, with unequal number of replications in each cell is considered. The asymptotic χ-square distribution of the test statistic under the null hypothesis is derived. The Pitman asymptotic relative efficiency of the test (i) based on semi-aligned rankings with respect to the test (ii) based on within-block rankings, is shown to be larger than one as the number of blocks tends to infinity. Also the asymptotic properties of linear rank statistics (i) and (ii) are investigated and the asymptotic relative efficiency of the test (i) with respect to the test (ii) is again shown to be larger than one.     

Nonideal mixing of dodecyltrimethylammonium halides and nonionic surfactant in adsorbed films and micelles

The ion–dipole interaction between dodecyltrimethylammonium cations and nonionic surfactant molecules in adsorbed films and micelles was investigated by concentrating on the difference in the degree of counterion binding by employing dodecyltrimethylammonium chloride (DTAC)–octyl methyl sulfoxide (OMS) and dodecyltrimethylammonium bromide (DTAB)–OMS mixtures. The phase diagrams of adsorption and micelle formation were constructed and then the nonideal mixing of different species of surfactants was demonstrated in terms of the excess Gibbs free energies of adsorption and micelle formation, and the surface excess areas. Furthermore the dependence of them on the counterion was clearly shown. All these results were found to support our previous view that the direct interaction between surfactant cation and the dipole of the hydrophilic part of a nonionic surfactant is essential in cationic-nonionic surfactant mixtures, i.e., the DTAC system with a lower counterion biding has more negative excess thermodynamic quantities than the DTAB system with a higher one.     

Accurate determination of trace amounts of phosphorus in geological samples by inductively coupled plasma atomic emission spectrometry with ion-exchange separation

In order to determine trace amounts of phosphorus in geological and cosmochemical rock samples, simple as well as reliable analytical schemes using an ICP-AES instrument were investigated. A (conventional) ICP-AES procedure could determine phosphorus contents at the level of several 100 μg g⁻¹ with a reasonable reproducibility (<10% for 200 μg g⁻¹; 1σ). An ICP-AES procedure coupled with matrix-separation using cation and anion exchange resins could lower the quantification level down to 1 μg g⁻¹ or even lower under the present experimental conditions. The matrix-separation ICP-AES procedure developed in this study was applied to twenty-one geological reference samples issued by Geological Survey of Japan. Obtained values vary from 1250 μg g⁻¹ for JB-3 (basalt) to 2.07 μg g⁻¹ for JCt-1 (carbonate). Matrix-separation ICP-AES yielded reasonable reproducibility (less than 8.3%; 1σ) of three replicate analyses for all the samples analyzed. In comparison of our data with certificate values as well as literature or reported values, there appear to be an apparent (and large) discrepancy between our values and certificate/reported values regardless of phosphorus contents. Based on the reproducibility of our data and the analytical capability of the matrix-separation ICP-AES procedure developed in this study (in terms of quantification limit, recovery, selectivity of an analyte through pre-concentration process, etc.), it is concluded that certified values for several reference standard rocks should be reevaluated and revised accordingly. It may be further pointed that some phosphorus data reported in literatures should be critically evaluated when they are to be referred in later publications.