Grafting of a bicycloorthoester onto polymers bearing sulfonium salt structures

Graft copolymerization of a bicycloorthoester (BOE) with polymer-supported sulfonium salts was studied. Several polymer-supported sulfonium salts were prepared by the homopolymerizations of p-vinylbenzyl tetramethylenesulfonium hexafluoroantimonate ( 2 ) and 4-(p-vinylphenyl)butyl tetramethylenesulfonium hexafluoroantimonate ( 3 ), and by the copolymerizations of 2 with some vinyl monomers (n-butyl vinyl ether, styrene, acrylonitrile, and p-styrenesulfonic acid potassium salt). These sulfonium salts could initiate the polymerization of BOE to give grafted polymers. Temperature dependences of the catalytic activity of them were not so dramatic as that of benzyl tetramethylenesulfonium hexafluoroantimonate ( 1 ), but the activities of them were higher than that of 1 at temperatures lower than 80°C. The conversion of BOE in the polymerizations with these polymer initiators was ca. 30–70% at 120°C for 7 h. An effect of the comonomer structure on the catalytic activity was observed and styrene was the best comonomer for 2 in terms of the reactivity of the copolymer. The spacer-modified sulfonium salt (homopolymer of 3 ) was slightly lower than polymer-supported benzyl type sulfonium salt (homopolymer of 2 ) in the catalytic activity.     

Synthesis and antiallergic activity of N-[4-(4-diphenylmethyl-1-piperazinyl)butyl]-1,4-dihydro-4-oxopyridine-3 - carboxamides

A new series of oxopyridinecarboxamide derivatives 3a--g and 5a were synthesized and evaluated for their antiallergic activity. 1,4-Dihydro-7-methyl-4-oxo-1,8-naphthyridine-3-carboxamides 3a and 5a exhibited potent antiallergic activity (inhibitory rates of 80.7 and 88.3%, respectively, at 20 mg/kg, p.o.) in the rat passive cutaneous anaphylaxis (PCA) test and also exhibited much more potent in vitro inhibitory activity than caffeic acid against the enzyme 5-lipoxygenase (5-LO). Their in vitro antihistamine activity, however, was weaker than that of ketotifen. Compounds 3a and 5a are viewed as promising candidates for antiallergic agents.     

Highly Pure Synthesis,Spectral Assignments,and Two‐Photon Properties of Cruciform Porphyrin Pentamers Fused with Benzene Units

Tetrameric porphyrin formation of 2‐hydroxymethylpyrrole fused with porphyrins through a bicyclo[2.2.2]octadiene unit gave bicyclo[2.2.2]octadiene‐fused porphyrin pentamers. Thermal conversion of the pentamers gave fully π‐conjugated cruciform porphyrin pentamers fused with benzene units in quantitative yields. UV/Vis spectra of fully π‐conjugated porphyrin pentamers showed one very strong Q absorption and were quite different from those of usual porphyrins. From TD‐DFT calculations, the HOMO level is 0.49 eV higher than the HOMO?1 level. The LUMO and LUMO+1 levels are very close and are lower by more than 0.27 eV than those of other unoccupied MOs. The strong Q absorption was interpreted as two mutually orthogonal single‐electron transitions (683 nm: 86 %, HOMO→LUMO; 680 nm: 86 %, HOMO→LUMO+1). The two‐photon absorption (TPA) cross section value (σ⁽²⁾) of the benzene‐fused porphyrin pentamer was estimated to be 3900 GM at 1500 nm, which is strongly correlated with a cruciform molecular structure with multidirectional π‐conjugation pathways.     

A modular approach to a new class of phosphinohydrazones and their use in asymmetric allylic alkylation reactions

A group of five phosphino hydrazones with a pendant binaphthyl unit as a chiral modifier has been synthesized from non-racemic 2,2′-bis(bromomethyl)-1,1′-binaphthyl and 3,3′-diiodo-2,2′-bis(bromomethyl)-1,1′-binaphthyl as the key intermediates. Their efficiency as chiral ligands in palladium-catalyzed allylic alkylation reactions has been investigated showing up to 95% ee under optimized conditions. X-ray diffraction structures of mono- and dimeric Pd complexes are also reported.     

Effective synthesis of diiodinated picene and dibenzo[a,h]anthracene by AuCl-catalyzed double cyclization

6,13-Diiododibenzo[a,h]anthracene and 5,8-diiodopicene were synthesized by AuCl-catalyzed double cyclization. The highly selective reaction yielded a new class of peri-halogenated fused aromatics.     

Novel Source of Trifluoromethyl Radical As Efficient Initiator for the Polymerization of Vinylidene Fluoride

A persistent perfluoroalkyl radical (PPFR), perfluoro‐3‐ethyl‐2,4‐dimethyl‐3‐pentyl, is shown to be a good source of •CF₃ radicals and a useful radical capable of initiating the polymerization of vinylidene fluoride (VDF). NMR characterizations of the resulting PVDF homopolymers showed that polymerization of VDF was exclusively initiated by •CF₃ radicals. The addition of •CF₃ radical onto VDF was regioselective leading to CF₃‐CH₂‐CF₂‐PVDF and the CF₃ end‐group acted as an efficient label to assess the molecular weights by ¹⁹F NMR spectroscopy. Various [PPFR]₀/[VDF]₀ initial molar ratios lead to CF₃–PVDF–CF₃ of different molecular weights. When that ratio decreased, both the molecular weights and the thermostability of these PVDFs increased, showing less defects of chaining and higher crystallinity.     

Growth of poly(3,4‐ethylenedioxythiophene) films prepared by base‐inhibited vapor phase polymerization

Transparent [90% transmittance at 550 nm at a sheet resistance (R_s) of 279 Ω sq^?1] poly(3,4‐ethylenedioxythiophene) (PEDOT) films with electrical conductivities up to 1354 S cm^?1 are prepared using base‐inhibited vapor phase polymerization at atmospheric pressure. The influence of reaction conditions, such as temperature and growth time, on the film formation is investigated. A simple and convenient two‐electrode method is used for the in situ measurement of resistance, enabling to investigate the growth mechanism of polymer films and the influence of different parameters (relative humidity and the amount of oxidant) on the film growth. Low humidity exerts a detrimental effect on film growth and conductivity. In situ R_s measurements suggest that a large structural change occurs upon washing the PEDOT‐oxidant film. © 2014 Wiley Periodicals, Inc. J Polym Sci Part B: Polym. Phys. 2014 , 52, 561–571     

Electrocatalysis of oxygen reduction on glassy carbon electrodes modified with anthraquinone moieties

Anthraquinone groups were electrochemically grafted to glassy carbon (GC) electrodes via methylene linker to study the oxygen reduction reaction (ORR) in alkaline medium. Two different anthraquinone derivatives, 2-bromomethyl-anthraquinone or 2-chloromethyl-anthraquinone, were used to modify the GC electrode surface. Several modification conditions encompassing potential cycling and electrolysis at a fixed potential were employed in order to vary the surface concentration of MAQ groups (Γ _MAQ) and to study the dependence of the O₂ reduction behaviour on electrografting procedure. Cyclic voltammetry confirmed the presence of anthraquinone moieties attached to the GC electrode and Γ _MAQ varied in the range of (0.5–2.4)?×?10^?10 mol cm^?2. Oxygen reduction was studied on MAQ-modified GC electrodes of various surface coverage using the rotating disc electrode (RDE) and rotating ring-disc electrode (RRDE) methods. The RDE and RRDE results of O₂ reduction reveal that GC/MAQ electrodes show rather similar electrocatalytic behaviour towards the ORR yielding hydrogen peroxide as the final product.     

Emission Control by Molecular Manipulation of Double‐Paddled Binuclear PtII Complexes at the Air‐Water Interface

Molecular functions depend on conformations and motions of the corresponding molecular species. An air–water interface is a suitable asymmetric field for the control of molecular conformations and motions under a small applied force. In this work, double‐paddled binuclear Pt^II complexes containing pyrazole rings linked by alkyl spacers were synthesized and their orientations and emission properties dynamically manipulated at the air–water interface. The complexes emerge from water with concurrent variation of interface orientation of the planes of the Pt^II complexes from perpendicular to parallel during mechanical compression suggesting a unique ‘submarine emission‘. Phosphorescence of the complexes is quenched at the air–water interface prior to monolayer formation with intensities subsequently rapidly increasing during monolayer compression. These results indicate that asymmetric reactions and motions might be controlled by applying mechanical force at the air–water interface.