Improvement of thermal and spectroscopic behavior of Er<Superscript>3+</Superscript>/Ce<Superscript>3+</Superscript> co-doped tellurite glass for lasing materials

Tellurite glasses (TeO₂–ZnO–Nb₂O₅) mono-doped Er³⁺ and co-doped Er³⁺/Ce³⁺ have been prepared using the melt-quenching technique. To evaluate the effect of Ce³⁺ on the structural, thermal stability of glass hosts and fluorescence properties of Er³⁺, X-ray diffraction patterns, Ftir spectra, differential scanning calorimeter curves, absorption spectra, fluorescence emission spectra, fluorescence lifetimes, up-conversion emission spectra of glass samples were measured and investigated. Using Judd–Ofelt theory, we calculated intensity parameters (Ω₂, Ω₄ and Ω₆), spontaneous emission probabilities, the radiative lifetime, luminescence branching factors and the quantum yield of luminescence for ⁴I_13/2 → ⁴I_15/2 transition. The co-doping with Ce³⁺ was effective on the suppression of up-conversion emission of Er³⁺ owing to the phonon-assisted energy transfer: Er³⁺:⁴I_11/2 + Ce³⁺:²F_5/2 → Er³⁺:⁴I_13/2 + Ce³⁺:²F_7/2 which contributed the effective enhancement of 1.53 µm fluorescence emission. The change in optical properties with the addition of Ce³⁺ ions have been discussed and compared with other glasses. Using the Mc Cumber method for the ⁴I_13/2 → ⁴I_15/2 transition, absorption cross-section, calculated emission cross-section, and gain cross-section values support that TZNEr1Ce1 glass is a potential material for developing broad-band and high-gain erbium-doped fiber amplifiers applied for 1.53 µm.     

Multi-performance characterization analysis of diameter and taper angle on alumina ceramic via using pulsed ultraviolet laser percussion drilling method

This paper presents the optimal conditions for the ultraviolet laser percussion drilling of alumina materials intended for use in heat sinks. The Taguchi method and grey relational analysis, along with the consideration of multiple quality characteristics, were applied for determining the optimal parameters. The entrance diameter and taper angle of the drilled hole were affected by the material processing parameters, including laser power, pulse duration, focal plane position, and number of pulses. The Taguchi method and grey relational analysis were used for assessing the effects of the operational parameters on multiple performance characteristics. Nine experiments based on an orthogonal array were performed. According to the results, the optimal process parameters were as follows: laser energy density, 3.82 J/cm²; focal plane position, 0.1 mm; number of pulses, 20 shots; and single pulse duration, 3 ms. Analysis of the grey relational grade revealed that the focal plane position was the most dominant parameter.     

Model-independent determination on <Emphasis Type="Italic">H</Emphasis><Subscript>0</Subscript> using the latest cosmic chronometer data

We perform the updated constraints on the Hubble constant H ₀ by using the model-independent method, Gaussian processes. Utilizing the latest 30 cosmic chronometer measurements, we obtain H ₀ = 67.38 ± 4.72 km s^?1 Mpc^?1, which is consistent with the Planck 2015 and Riess et al. analysis at 1σ confidence level. Different from the results of Busti et al. by only using 19 H(z) measurements, our reconstruction results of H(z) and the derived values of H ₀ are insensitive to the concrete choice of covariance functions of Matérn family.     

Perovskite-type (Ba<Subscript>0.15</Subscript>Sr<Subscript>0.85</Subscript>)(B<Subscript>0.15</Subscript>Co<Subscript>0.85</Subscript>)O<Subscript>3 − δ</Subscript> (B = Ti,Nb) oxides: structural stability,oxygen nonstoichiometry,and oxygen sorption/desorption properties

The perovskite-type Ba- and Ti/Nb-doped (Ba_0.15Sr_0.85)(B_0.15Co_0.85)O_3 ? δ (B = Ti, Nb) oxides were synthesized successfully by the solid-state reaction method. Crystal structure, elemental compositions, and oxygen nonstoichiometry of the as-synthesized (Ba_0.15Sr_0.85)(B_0.15Co_0.85)O_3 ? δ (B = Ti, Nb) oxides were investigated by X-ray diffraction (XRD), scanning electron microscopy-energy dispersive spectrometry (SEM-EDS), inductively coupled plasma (ICP)-atomic emission spectrometry, thermogravimetry (TG), and iodometric titration. XRD results demonstrate that the as-obtained (Ba_0.15Sr_0.85)(B_0.15Co_0.85)O_3 ? δ (B = Ti, Nb) oxides possess purely cubic perovskite-type structures. The temperature-swing oxygen sorption/desorption properties of the as-synthesized (Ba_0.15Sr_0.85)(B_0.15Co_0.85)O_3 ? δ (B = Ti, Nb) perovskite-type oxides were studied by the dynamic TG. Results show that the structural stability of the co-doped (Ba_0.15Sr_0.85)(B_0.15Co_0.85)O_3 ? δ (B = Ti, Nb) oxides is improved greatly, and the high oxygen sorption capacity for the perovskite-type (Ba_0.15Sr_0.85)(B_0.15Co_0.85)O_3 ? δ (B = Ti, Nb) oxides is also obtained between 300 and 950 °C in air.     

Synthesis,refinement of the structure,and AC conductivity behavior of sodium lithium orthonavadates

The Na _x Li_1-x CdVO₄ (x = 0.5, 1) orthovanadates were prepared using a solid-state reaction method. The x-ray diffraction patterns (XRDP) of both materials reveal the formation of the Na₂CrO₄ structure. Vibrational study confirms the existence of [VO₄]^3? group. Electrical measurements of our compounds have been investigated using complex impedance spectroscopy (CIS) in the frequency and temperature range 209 Hz–1 MHz and 589–703 K, respectively. Nyquist plots reveal the presence of tow contributions, an equivalent circuit was proposed. DC conductivity shows electrical conduction in the material as a thermally activated process. The AC conductivity is explained using the non-overlapping small polaron tunneling (NSPT) conduction mechanism. A relationship between crystal structure and ionic conductivity was established and discussed.     

Effect of pyrolytic polyacrylonitrile on electrochemical performance of Si/graphite composite anode for lithium-ion batteries

The silicon/graphite (Si/G) composite was prepared using pyrolytic polyacrylonitrile (PAN) as carbon precursor, which is a nitrogen-doped carbon that provides efficient pathway for electron transfer. The combination of flake graphite and pyrolytic carbon layer accommodates the large volume expansion of Si during discharge-charge process. The Si/G composite was synthesized via cost-effective liquid solidification followed by carbonization process. The effect of PAN content on electrochemical performance of composites was investigated. The composite containing 40 wt% PAN exhibits a relatively better rate capability and cycle performance than others. It exhibits initial reversible specific capacity of 793.6 mAh g^?1 at a current density of 100 mA g^?1. High capacity of 661 mAh g^?1 can be reached after 50 cycles at current density of 500 mA g^?1.     

Synthesis of hierarchical Na<Subscript>2</Subscript>FeP<Subscript>2</Subscript>O<Subscript>7</Subscript> spheres with high electrochemical performance via spray drying

Hierarchical Na₂FeP₂O₇ spheres with nanoparticles were successfully fabricated by a facile spray drying method. A relatively low drying temperature was introduced in order to form a carbon layer on the surface. As a cathode material for sodium-ion batteries, it delivered a reversible capacity of 84.4 mAh g^?1 at 0.1 C and showed excellent cycling and rate performance (64.7 mAh g^?1 at 5 C). Furthermore, a full sodium battery was fabricated using SP-Na₂FeP₂O₇ as the cathode and hard carbon as the anode, suffering almost no capacity loss after 400 cycles at 1 C. Due to its superior electrochemical property and the low materials cost, Na₂FeP₂O₇ is becoming a promising cathode material for large-scale energy storage systems.     

Layered lithium-rich oxide nanoparticles: low-temperature synthesis in mixed molten salt and excellent performance as cathode of lithium-ion battery

Layered lithium-rich oxide, 0.5Li₂MnO₃·0.5LiMn_1/3Ni_1/3Co_1/3O₂, is synthesized in a mixed molten salt of KCl and LiCl under 750 °C. Its morphology and structure are characterized by X-ray diffraction, scanning electron microscopy, transmission electron microscopy, and nitrogen adsorption and desorption isotherm, and its performances as cathode of lithium-ion battery are investigated by charge–discharge test and electrochemical impedance spectroscopy, with a comparison of the samples synthesized via solid-state reaction. It is found that the resulting product consists of uniform nanoparticles, 50 nm in average, which possesses a well crystallite layered structure although its synthesis temperature is low and thus exhibits excellent cyclic stability and rate capability. The resulting product delivers an initial discharge capacity of 268 mAh g^?1 at 0.1 C and has a capacity retention of 82% after 100 cycles at 1 C, compared to the 243 mAh g^?1 and 73% for the sample synthesized by solid-state reaction under 900 °C.     

Complex dynamics of a particle in an oscillating potential field

In this paper, Mg-doped ZnO nanoparticles were synthesized by the facile sol–gel method. The crystalline structure, characteristic absorption bands and morphology of the obtained Mg-doped ZnO nanoparticles were studied by XRD, FTIR and TEM. The thermal degradation behaviour of the samples was investigated by differential scanning calorimetry (DSC) and thermogravimetry (TG). The effect of Mg concentrations and annealing temperatures on the antibacterial properties of the obtained nanoparticles was investigated in detail. The results indicated that doping Mg ions into ZnO lattice could enhance its antibacterial activity. Antibacterial assay demonstrated that Mg-doped ZnO with 7% Mg content annealed at 400 ^°C had the strongest antibacterial activity against Listeria monocytogenes (98.7%). This study indicated that the inhibition rate of ZnO nanoparticles increased with the formation of granular structure and the decrease of ZnO size due to the doping of Mg ions into the ZnO lattice.