The application of the gradient-based adjoint multi-point optimization of single and double shock control bumps for transonic airfoils

A shock control bump (SCB) is a flow control method that uses local small deformations in a flexible wing surface to considerably reduce the strength of shock waves and the resulting wave drag in transonic flows. Most of the reported research is devoted to optimization in a single flow condition. Here, we have used a multi-point adjoint optimization scheme to optimize shape and location of the SCB. Practically, this introduces transonic airfoils equipped with the SCB that are simultaneously optimized for different off-design transonic flight conditions. Here, we use this optimization algorithm to enhance and optimize the performance of SCBs in two benchmark airfoils, i.e., RAE-2822 and NACA-64-A010, over a wide range of off-design Mach numbers. All results are compared with the usual single-point optimization. We use numerical simulation of the turbulent viscous flow and a gradient-based adjoint algorithm to find the optimum location and shape of the SCB. We show that the application of SCBs may increase the aerodynamic performance of an RAE-2822 airfoil by 21.9 and by 22.8 % for a NACA-64-A010 airfoil compared to the no-bump design in a particular flight condition. We have also investigated the simultaneous usage of two bumps for the upper and the lower surfaces of the airfoil. This has resulted in a 26.1 % improvement for the RAE-2822 compared to the clean airfoil in one flight condition.     

Strain field and extrusion load in ECAE process of bi-metal circular cross section

In this paper the previous velocity field proposed by the authors for the prediction of strain field and deformation load of circular cross section billet in ECAE process has been extended to take into account the deformation behavior of bimetal circular billet in the same process. Accordingly, using Bezier method, as a robust method for determining the geometry of the streamlines, the strain field developed in the circular bimetal billet is calculated. Then, based on the kinematically admissible velocity and strain fields and using the upper bound theorem the ECAE load is predicted. It was found that at constant inner corner angle of ECAE die, with decreasing of outer curve corner the inhemogenity of strain distribution is decreased and the ECAE force is increased. Also, at a constant outer curve corner, by decreasing the inner corner angle, the extrusion load is increased. A good agreement was found between the predicted and experimental results.     

A Simple,Transition Metal Catalyst-Free Method for the Design of Complex Organic Building Blocks Used to Construct Porous Metal–Organic Frameworks

The design of metal–organic frameworks (MOFs) having large pore sizes and volumes often requires the use of complex organic ligands, currently synthesized using costly and time-consuming palladium-catalyzed coupling chemistry. Thus, in the present work, a new strategy for ligand design is reported, where piperazine and dihydrophenazine units are used as substitutes for benzene rings, which are the basic building block of most MOF ligands. This chemistry, which is based on simple, nucleophilic aromatic substitution (S_NAr) reactions, is used for the transition metal catalyst-free construction of 21 new, carboxylate-based ligands with varying sizes, shapes, and denticity and 15 linear di- and tetra-nitriles. Moreover, to demonstrate the utility of the ligands as building blocks, 16 new structurally diverse MOFs having surface areas up to 3100 m² g⁻¹ were also synthesized.     

Polyoxometalates and Metal–Organic Frameworks Based Dual-Functional Catalysts for Detoxification of Bis(2-Chloroethyl) Sulfide and Organophosphorus Agents

Catalysis Surveys from Asia - The bis(2-chloroethyl) sulfide, commonly named sulfur mustard, as a vesicant agent and the tabun, sarin, soman, and venomous X as organophosphorus nerve agents are the...     

Development of an Efficient Procedure for Determination of Copper,Zinc and Iron after Solid Phase Extraction on 3‐(1‐(1‐H‐Indol‐3‐yl)‐3‐Phenylallyl)‐1H‐Indole Loaded on Duolite XAD 761

A method for the simultaneous preconcentration of Cu²⁺,Zn²⁺ and Fe³⁺ ions, in some food samples has been reported. The method is based on the adsorption of 3‐(1‐(1‐H‐indol‐3‐yl)‐3‐phenylallyl)‐1H‐indole (IPAI) loaded on Duolite XAD 761. The metal ions adsorbed on the modified solid phase resin are eluted using 6 mL of 4 mol L^?1 nitric acid. The influences of the analytical parameters including pH and amount of ligand and solid phase and type and amount of surfactant and sample volume on the metal ions recoveries were investigated. The effects of matrix ions on the retentions of the analytes were also examined. The recoveries of analytes were generally higher than 95% with a RSD lower than 5%. The method has been successfully applied for these metals content evaluation in some real samples.     

Sonochemical synthetic methods to produce functionalized conducting copolymers

Polyaniline (PANI) is one of the most investigated intrinsically conducting polymers. Copolymerization of aniline with aniline derivatives was considered one of the most effective and promising ways of improving the properties of PANI. In this work, firstly ethyl 3‐aminobenzoate and butyl 3‐aminobenzoate were synthesized from 3‐aminobenzoic acid by direct esterification. Then the copolymerization of 3‐amino benzoic acid, ethyl 3‐aminobenzoate, and butyl 3‐aminobenzoate with aniline was carried out by sonochemical polymerization in aqueous hydrochloric acid using ammonium persulfate (APS) as an initiator. The effects of variation in the molar ratio of the two monomers on chain structure, conductivity, and the redox properties of the copolymer are discussed. The prepared polymers are characterized by ¹H NMR spectroscopy, X‐ray diffraction (XRD) and Fourier transform infrared spectroscopy (FT‐IR). Thermal behavior of the prepared copolymers was studied by differential scanning calorimetry. The copolymers were doped with HCl and their conductivity was measured. Copyright © 2009 John Wiley & Sons, Ltd.     

Kalman filtering for reliable estimation of BBB permeability

INTRODUCTION: The blood-brain barrier (BBB) plays an important role in the pathophysiology of a number of central nervous system disorders. In the past, a number of laboratory techniques have been proposed to quantify permeability coefficient ki, an important index of barrier function. Recently, magnetic resonance imaging (MRI) has been used to estimate ki based on graphical plot technique. The MR technique was found to be in good agreement with the gold standard, quantitative autoradiography (QAR). However, a reduced image signal-to-noise ratio, among other factors such as partial volume effects, did not allow reliable estimation of permeability coefficients. This proof-of-principle study proposes the use of Kalman filter as a filtering technique for a reliable estimation of permeability coefficients. The results are compared to those obtained using the Wiener filter technique. MATERIALS AND METHODS: MRI experiments were performed in Wistar rats (N=2) using a 4.7-T Bruker Biospec MR system (Bruker Biospin, Billerica, MA). After acquiring localizer images, T2-weighted diffusion-weighted imaging images were acquired. Finally, a rapid T1 mapping protocol was implemented to acquire one pre-gadolinium diethylenetriamine pentaacetic acid baseline data set followed by postinjection data sets at 3-min intervals for 45 min. Data were postprocessed with and without the application of Kalman and Wiener filters to obtain an estimate of ki. RESULTS AND DISCUSSION: Comparing T1 maps, Patlak plots and permeability maps with and without the Kalman filtering presented several interesting observations. Kalman-filtered Patlak plots, compared to nonfiltered plots, showed that discrete data points on the plot were closer to the line fit. The number of time points used for the construction of the graphical plot had no effect on permeability coefficient estimates when the Kalman filter was used. A box-and-whiskers plot showed longer Y-error bars for nonfiltered and Wiener data compared to Kalman-filtered data. These observations suggest that it may be possible to obtain reliable permeability coefficient estimates in a short study time by applying the Kalman filter to the data. Future work involves investigating the application of this filter on a large-sample-size animal study and evaluating the role of partial volume effects on BBB permeability estimation.     

A tandem Aldol-Diels-Alder reaction accelerated in water: An approach to the Catalyst-Free One-Pot synthesis of spiro Thio-Oxindoles

Spiro thio-oxindoles are prepared in situ by the reaction of the corresponding aldehydes and thio-oxindoles in a straightforward, environmentally friendly, highly efficient and simple procedure. The reaction took place in water with no catalyst added. This one-pot reaction afforded regio- and diastereoselective products in high yields (61–93%).     

One-pot, three-component condensation of 2-hydroxybenzaldehyde derivatives, primary amines with alkyl isocyanides to N-alkyl-2-(2-hydroxyphenyl)-2-imino-acetamides

One-pot, three-component condensation of 2-hydroxybenzaldehyde derivatives, primary amines with alkyl isocyanides is reported. N-alkyl-2-(2-hydroxyphenyl)-2-iminoacetamide derivatives are generated presumably via the preliminary formation of N, N′-disubstituted benzo[b]furan-2,3-diamines and subsequent oxidation with molecular oxygen.