Preparation and characterization of amorphous,I and II forms of clopidogrel hydrogen sulfate

In this work the amorphous, I and II forms of clopidogrel hydrogen sulfate (CHS) were prepared and characterized by use of powder X‐ray diffraction (PXRD), Fourier transform infrared spectroscopy (FTIR) and differential scanning calorimetry (DSC). The labile precipitate and oiling out during reactive crystallization were also firstly reported. Based on the solubility and thermochemical data, the amorphous form and I form is found to be monotropically related, while the I form and II form are enantiotropically related. In addition, both transformations from anhydrous form to I form and from I form to II form are greatly temperature‐dependent, which gives us a window to prepare each pure form. These results will contribute a better understanding about the polymorphic nature and crystallization mechanism of clopidogrel hydrogen sulfate. (© 2012 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Green Regioselective Azidolysis of Epoxides Catalyzed by Multi‐Site Phase‐Transfer Catalyst

A facile synthesis of 1,2‐azidoalcohols from their epoxides using α,α',α”‐N‐hexakis(triethylammoniummethylene chloride)‐melamine as a multi‐site phase‐transfer catalyst in water was developed. By this eco‐friendly and highly atom‐economic method, a variety of 1,2‐azidoalcohols was obtained in high yields with excellent regioselectivity and in short reaction times. Application of this six‐site PTC in the ring opening of epoxides by cyanide, acetate and chloride anions was also studied. The catalyst can be recovered after completion of the reaction and can be recycled without affecting the catalytic property.     

Impacts of zeolite nanoparticles on substrate properties of thin film nanocomposite membranes for engineered osmosis

In this work, microporous substrates modified by zeolite nanoparticles were prepared and used for composite membrane making with the aim of reducing internal concentration polarization (ICP) effect of membranes during engineered osmosis applications. Nanocomposite substrates were fabricated via phase inversion technique by embedding nanostructured zeolite (clinoptilolite) in the range of 0–0.6 wt% into matrix of polyethersulfone (PES) substrate. Of all the substrates prepared, the PES0.4 substrate (with 0.4 wt% zeolite) exhibited unique characteristics, i.e., increased surface porosity, lower structural parameter (S) (from 0.78 to 0.48 mm), and enhanced water flux. The thin film nanocomposite (TFN) membrane made of this optimized substrate was also reported to exhibit higher water flux compared to the control composite membrane during forward osmosis (FO) and pressure-retarded osmosis (PRO) test, without compromising reverse solute flux. The water flux of such TFN membrane was 43% higher than the control TFC membrane (1.93 L/m² h bar) with salt rejection recorded at 94.7%. An increment in water flux is ascribed to the reduction in structural parameter, leading to reduced ICP effect.     

Determination of metastable zone width for combined anti-solvent/cooling crystallization

The metastable zone width (MSZW), induction time and primary nucleation kinetics have been measured and estimated for simultaneous anti-solvent and cooling crystallization of paracetamol in iso-propanol/water solution. ATR-FTIR spectroscopy and laser back-scattering are used to measure the solute concentration and primary nucleation event, respectively. Response surface analysis was applied to find the contribution of the crystallization mechanism on the MSZW and obtain a statistical model for quick estimation of the MSZW. Two theoretical approaches for the estimation of nucleation rate kinetic parameters from experimental data are presented. The methods are obtained by modifying the classical Nyvlt's correlation for simultaneous cooling/anti-solvent crystallizations. The nucleation order n for primary nucleation was deduced from the slope of a linear plot of log(MSZW) vs. log(cooling and anti-solvent rates). The induction time was also estimated by changing the classical methods for combined cooling and anti-solvent crystallization.     

Gliclazide as novel carrier in construction of PVC-based La(III)-selective membrane sensor

A PVC-based sensor for La³⁺ ions based on N-[hexahydrocyclopentapyrol-2((1H)yl)amino]carbonyl]-4-methyl benzene sulfonamide (gliclazide) as a novel carrier was prepared. The electrode exhibits a Nernstian response for La³⁺ over a wide concentration range (1.0×10⁻¹-1.0×10⁻⁶ M) with a slope of 20.1 mV per decade. The limit of detection is 8.0×10⁻⁷ M. The sensor has a very short response time (<15 s) and a useful working pH range of 4.0-8.0. The proposed membrane sensor shows excellent discriminating ability towards La³⁺ ions with regard to several alkali, alkaline earth, transition and heavy metal ions. The electrode was successfully applied for determination of La³⁺ in binary mixtures.     

A selective membrane electrode for iodide ion based on a thiopyrilium ion derivative as a new ionophore

A highly selective electrode for iodide ion based on a thiopyrilium derivative as an excellent ionophore is described. At pH 5.5-8.0, the electrode responds to iodide ion in a linear range from 1.0×10⁻¹ to 8.0×10⁻⁷ M with a slope of 60.2 mV per decade, and a detection limit of 2.0×10⁻⁷ M. Selectivity coefficients determined with the match potential method (MPM) indicate that the interference from inorganic and organic anions is very small. The proposed sensor shows a fast response time of approximately 15 s. It was applied as an indicator electrode in titration of iodide with Ag⁺.     

Determination of ultra trace amounts of cobalt and nickel in water samples by inductively coupled plasma-optical emission spectrometry after preconcentration on modified C18-silica extraction disks

A highly sensitive and accurate method for preconcentration and determination of ultra trace amounts of cobalt and nickel ions in water samples is proposed. The preconcentration is achieved using C₁₈-silica extraction disks modified with 5-(6-methoxy-2-benzothiazoleazo)-8-aminoquinoline (MBTAQ). The retained ions on the prepared solid phase was eluted with 10 ml of 0.01 M nitric acid and measured by inductively coupled plasma-optical emission spectrometry (ICP-OES). The influence of the type and amount of eluent used, pH, sample and eluent flow rates, amount of MBTAQ and the effect of other ions on extraction efficiency were investigated. The limits of detection of the method were 0.08 and 0.06 μg l^− 1 for cobalt and nickel, respectively, and provide an enrichment factor of 100. The results obtained on 10 successive extractions and elution cycles revealed relative standard deviations of 1.5 and 1.0% for cobalt and nickel, respectively. The proposed method has been applied to the determination of ultra trace amounts of cobalt and nickel ions in natural and synthetic water samples with satisfactory results.     

Removal of Arsenic (III) from natural contaminated water using magnetic nanocomposite: kinetics and isotherm studies

The application of newly synthesized Fe₃O₄/TiO₂–SiO₂ that is modified with zinc (FTSZ) as a sorbent, for the removal of arsenic from contaminated water has been investigated in the present study. SEM, FTIR, XRD, BET, Zeta potential sizer (ξ) analyses are used to determine the sorbent characterization. The effect of the operational parameters such as initial pH, initial concentration, and the contact time were studied. In addition, the equilibrium behavior of FTSZ in As(III) removal was investigated in the temperature range of 20–40 °C. The results showed that the equilibrium data were fitted well with Langmuir than Freundlich isotherm model. The maximum monolayer adsorption capacity estimated by Langmuir isotherm was 24.010 mg g^?1. Thermodynamic parameters, ?H°, ?S° and ?G° were also calculated from graphical interpretation of the experimental data. Standard heats of sorption (?H°) were found to be endothermic and ?S° values were calculated to be positive for the sorption of As(III) onto the adsorbent.     

Speciation analysis of mercury contaminants in water samples by RP-HPLC after solid phase extraction on modified C18 extraction disks with 1,3-bis(2-cyanobenzene)triazene

A highly sensitive and accurate method for preconcentration and determination of ultra trace amounts of inorganic mercury and organomercury compounds in different water samples is proposed. The preconcentration is achieved using octadecyl silica (C₁₈) extraction disks modified with 1,3-bis(2-cyanobenzene)triazene (CBT). The retained analytes as their triazenide complexes on the solid phase was eluted with 10 ml acetonitrile and measured by reversed-phase high-performance liquid chromatography (RP-HPLC). Type and amount of eluent, pH, amount of CBT, flow rates of sample solution and eluent have been optimized in order to obtain quantitative recovery of the analytes. The effect of interfering ions, such as Cu²⁺, Mn²⁺, Fe²⁺, Al³⁺, Zn²⁺, Cd²⁺, Ca²⁺, Mg²⁺, Ba²⁺, Pb²⁺, K⁺ and Na⁺ usually present in water samples on the recovery of the analytes has also been investigated. The enrichment factor of 100 was obtained for all mercury species and the analytical detection limits of phenylmercury, methylmercury and Hg²⁺ were found as 0.8, 1.0 and 1.3 ng l^− 1, respectively. Stability of mercury species after extraction on the modified disks was studied and the results showed that complexes collected on the disks were stable for at least 5 days. The proposed method has been applied to the quantitative determination of mercury species in natural and synthetic water samples with recoveries more than 90%.     

Magnetically separable and recyclable g-C<Subscript>3</Subscript>N<Subscript>4</Subscript> nanocomposite catalyzed one-pot synthesis of substituted imidazoles

A green, reliable synthetic method and highly efficient one-pot three-component synthesis of 2,4,5-trisubstituted imidazoles from 1,2-diketones, aldehydes and ammonium acetate in the presence of recyclable magnetic graphitic carbon nitride nanocomposite (Fe₃O₄@g-C₃N₄) has been developed. Various imidazole derivatives were obtained in moderate to excellent yields and high purity after recrystallization from ethanol. Interestingly, the low-cost Fe₃O₄@g-C₃N₄ a nontoxic and inexpensive catalyst showed excellent recyclability using an external magnet without loss of parent catalytic activity even after ten cycles and its provides new opportunities for the truly environmental friendliness methodology.