A selective membrane electrode for iodide ion based on a thiopyrilium ion derivative as a new ionophore

A highly selective electrode for iodide ion based on a thiopyrilium derivative as an excellent ionophore is described. At pH 5.5-8.0, the electrode responds to iodide ion in a linear range from 1.0×10⁻¹ to 8.0×10⁻⁷ M with a slope of 60.2 mV per decade, and a detection limit of 2.0×10⁻⁷ M. Selectivity coefficients determined with the match potential method (MPM) indicate that the interference from inorganic and organic anions is very small. The proposed sensor shows a fast response time of approximately 15 s. It was applied as an indicator electrode in titration of iodide with Ag⁺.     

Removal of Arsenic (III) from natural contaminated water using magnetic nanocomposite: kinetics and isotherm studies

The application of newly synthesized Fe₃O₄/TiO₂–SiO₂ that is modified with zinc (FTSZ) as a sorbent, for the removal of arsenic from contaminated water has been investigated in the present study. SEM, FTIR, XRD, BET, Zeta potential sizer (ξ) analyses are used to determine the sorbent characterization. The effect of the operational parameters such as initial pH, initial concentration, and the contact time were studied. In addition, the equilibrium behavior of FTSZ in As(III) removal was investigated in the temperature range of 20–40 °C. The results showed that the equilibrium data were fitted well with Langmuir than Freundlich isotherm model. The maximum monolayer adsorption capacity estimated by Langmuir isotherm was 24.010 mg g^?1. Thermodynamic parameters, ?H°, ?S° and ?G° were also calculated from graphical interpretation of the experimental data. Standard heats of sorption (?H°) were found to be endothermic and ?S° values were calculated to be positive for the sorption of As(III) onto the adsorbent.     

Magnetically separable and recyclable g-C<Subscript>3</Subscript>N<Subscript>4</Subscript> nanocomposite catalyzed one-pot synthesis of substituted imidazoles

A green, reliable synthetic method and highly efficient one-pot three-component synthesis of 2,4,5-trisubstituted imidazoles from 1,2-diketones, aldehydes and ammonium acetate in the presence of recyclable magnetic graphitic carbon nitride nanocomposite (Fe₃O₄@g-C₃N₄) has been developed. Various imidazole derivatives were obtained in moderate to excellent yields and high purity after recrystallization from ethanol. Interestingly, the low-cost Fe₃O₄@g-C₃N₄ a nontoxic and inexpensive catalyst showed excellent recyclability using an external magnet without loss of parent catalytic activity even after ten cycles and its provides new opportunities for the truly environmental friendliness methodology.     

Magnetic g-C3N4 nanocomposite-catalyzed environmentally benign aminolysis of epoxide

Research on Chemical Intermediates - A magnetic graphitic carbon nitride (g-C3N4) nanocomposite was prepared and used as a novel magnetically retrievable nanocatalyst for efficient ring opening of...     

Nuclephilic ring opening of epoxides promoted by multi-site phase-transfer catalyst:An efficient and eco-friendly route to synthesis of b-hydroxy-thiocyanate

A highly effective and mild protocol for ring opening of epoxides with NH ₄ SCN in the presence of catalytic amount of a multisite phase-transfer catalyst, α,α',α" -N-hexakis(triethylammoniummethylene chloride)-melamine, is developed. A variety of b-hydroxy thiocyanates as important intermediates in agricultural and pharmaceutical chemistry were obtained in high yields with excellent regioselectivity and in short reaction times.     

Speciation analysis of mercury contaminants in water samples by RP-HPLC after solid phase extraction on modified C18 extraction disks with 1,3-bis(2-cyanobenzene)triazene

A highly sensitive and accurate method for preconcentration and determination of ultra trace amounts of inorganic mercury and organomercury compounds in different water samples is proposed. The preconcentration is achieved using octadecyl silica (C₁₈) extraction disks modified with 1,3-bis(2-cyanobenzene)triazene (CBT). The retained analytes as their triazenide complexes on the solid phase was eluted with 10 ml acetonitrile and measured by reversed-phase high-performance liquid chromatography (RP-HPLC). Type and amount of eluent, pH, amount of CBT, flow rates of sample solution and eluent have been optimized in order to obtain quantitative recovery of the analytes. The effect of interfering ions, such as Cu²⁺, Mn²⁺, Fe²⁺, Al³⁺, Zn²⁺, Cd²⁺, Ca²⁺, Mg²⁺, Ba²⁺, Pb²⁺, K⁺ and Na⁺ usually present in water samples on the recovery of the analytes has also been investigated. The enrichment factor of 100 was obtained for all mercury species and the analytical detection limits of phenylmercury, methylmercury and Hg²⁺ were found as 0.8, 1.0 and 1.3 ng l^− 1, respectively. Stability of mercury species after extraction on the modified disks was studied and the results showed that complexes collected on the disks were stable for at least 5 days. The proposed method has been applied to the quantitative determination of mercury species in natural and synthetic water samples with recoveries more than 90%.     

Dinuclear Zn(II) and tetranuclear Co(II) complexes of a tetradentate N2O2 Schiff base ligand: Synthesis,crystal structure,characterization, DFT studies,cytotoxicity evaluation,and catalytic activity toward benzyl alcohol oxidation

Two novel dinuclear Zn(II) and tetranuclear Co(II) complexes of a tetradentate N₂O₂ Schiff base ligand (H₂ L = N,N′-bis-(4-hydroxysalicylidene)-1,3-diaminopropane) were prepared. The structures of the H₂ L ligand, [4(Zn₂ L (μ-O₂CCH₃)(O₂CCH₃)(H₂O))]⋅4CH₃OH⋅3H₂O (complex 1 ) and [Co₄ L ₂(μ-O₂CCH₃)₂(O₂CCH₃)₂]⋅2H₂O (complex 2 ) were unambiguously characterized by elemental analysis, mass spectrometry, Fourier-transform infrared spectroscopy (FT-IR), ¹H nuclear magnetic resonance (NMR), and UV–Vis spectroscopy. Single crystal X-ray diffraction studies revealed that two Zn(II) nuclei of 1 were connected through μ-phenolato and μ-acetato bridges and had distorted square pyramidal and distorted octahedral coordination geometries. Four Co(II) nuclei of 2 , on the contrary, showed a Co₄O₄ cubane-like configuration in which Co(II) cations and O atoms were located at alternating corners of a distorted cube. Density functional theory studies at the B3LYP/6–31 G(d) level were carried out to gain an insight into the thermodynamic stability of the complexes. in vitro cytotoxicity of the ligand and the complexes were evaluated using the MTT assay against breast cancer MCF7 cells, melanoma cancer A375 cells, and prostate cancer PC3 cells as representative human cancer cell lines. Complex 1 showed a remarkable activity against A375 and PC3 cancer cell lines. In addition, 1 and 2 were used as precursors to produce zinc and cobalt oxide nanoparticles via pyrolysis technique. The resulting ZnO and Co₃O₄ nanoparticles were characterized using FT-IR spectroscopy, UV–Vis diffuse reflectance spectroscopy, powder X-ray diffraction, and field emission scanning electron microscopy. Then, these nanoparticles were used as heterogeneous catalysts in the oxidation of benzyl alcohol with hydrogen peroxide at room temperature. Both catalysts showed good recyclability with a negligible decrease in their efficiency during four catalytic cycles. The results of theoretical calculations showed that the most stable product was benzaldehyde, which is in good agreement with the obtained experimental results.     

Study on the interaction of tamiflu and oseltamivir carboxylate with human serum albumin

Oseltamivir phosphate (OP; tamiflu) is an antiviral pro-drug, which is hydrolyzed hepatically to the active metabolite oseltamivir carboxylate (OC). It is the first orally neuraminidase inhibitor that was used in the treatment and prophylaxis of influenza virus A and B infection. Human serum albumin (HSA) is the most abundant of the proteins in the blood plasma and is major transporter for delivering several drugs in vivo. This study was designed to examine the interaction of HSA with oseltamivir phosphate (OP) and oseltamivir carboxylate (OC) in aqueous solution at physiological conditions, using a constant protein concentration and various drug contents. FTIR, UV-Vis spectroscopic methods were used to determine the drugs binding mode, the binding constant and the effects of drug complexation on protein secondary structure. Structural analysis showed that OP and OC bind HSA via polypeptide polar groups with overall binding constants of K(OP-HSA)=3.86(± 1.05)× 10(3)M(-1) and K(OC-HSA)=1.5(±0.45) × 10(2)M(-1). The alterations of protein secondary structure are attributed to a partial destabilization of HSA on drug complexation. The protein secondary structure showed no major alterations at low drugs concentrations (50 μM), whereas at higher content (1mM), decrease of α-helix from 58% (free HSA) to 38% (OP-HSA)-48% (OC-HSA), decrease of random coil from 15% (free HSA) to 2% (OP-HSA)-3% (OC-HSA), increase of β-sheet from 6% (free HSA) to 20% (OC-HSA)-29% (OP-HSA) and turn from 8% (free HSA) to 17% (OC-HSA)-19% (OP-HSA) occurred in the drug-HSA complexes. These observations indicated that low drug content induced protein stabilization, whereas at high drug concentration, a partial protein destabilization occurred in these drug-HSA complexes.     

Determination of ultra trace amounts of cobalt and nickel in water samples by inductively coupled plasma-optical emission spectrometry after preconcentration on modified C18-silica extraction disks

A highly sensitive and accurate method for preconcentration and determination of ultra trace amounts of cobalt and nickel ions in water samples is proposed. The preconcentration is achieved using C₁₈-silica extraction disks modified with 5-(6-methoxy-2-benzothiazoleazo)-8-aminoquinoline (MBTAQ). The retained ions on the prepared solid phase was eluted with 10 ml of 0.01 M nitric acid and measured by inductively coupled plasma-optical emission spectrometry (ICP-OES). The influence of the type and amount of eluent used, pH, sample and eluent flow rates, amount of MBTAQ and the effect of other ions on extraction efficiency were investigated. The limits of detection of the method were 0.08 and 0.06 μg l^− 1 for cobalt and nickel, respectively, and provide an enrichment factor of 100. The results obtained on 10 successive extractions and elution cycles revealed relative standard deviations of 1.5 and 1.0% for cobalt and nickel, respectively. The proposed method has been applied to the determination of ultra trace amounts of cobalt and nickel ions in natural and synthetic water samples with satisfactory results.