An efficient one-pot multi-component synthesis of 3,4,5-substituted furan-2(5H)-ones catalyzed by tetra-n-butylammonium bisulfate

A facile one-pot synthesis of 3,4,5-substituted furan-2(5H)-one derivatives from a three-component reaction of aniline derivatives, dialkylacetylenedicarboxylates and aromatic aldehydes under mild conditions using tetra-n-butylammonium bisulfate as a catalyst has been developed.     

Simultaneous analysis of non‐steroidal anti‐inflammatory drugs using electrochemically controlled solid‐phase microextraction based on nanostructure molecularly imprinted polypyrrole film coupled to ion mobility spectrometry

A simple, rapid, and highly sensitive method for simultaneous analysis of anti‐inflammatory drugs (naproxen, ibuprofen, and mefenamic acid) in diluted human serum was developed using the electrochemically controlled solid‐phase microextraction coupled to ion mobility spectrometry. A conducting molecularly imprinted polymer film based on polypyrrole was synthesized for the selective uptake and release of drugs. The film was prepared by incorporation of a template molecule (naproxen) during the electropolymerization of pyrrole onto a platinum electrode using cyclic voltammetry method. The measured ion mobility spectrometry intensity was related to the concentration of analytes taken up into the films. The calibration graphs (naproxen, ibuprofen, and mefenamic acid) were linear in the range of 0.1–30 ng/mL and detection limits were 0.07–0.37 ng/mL and relative standard deviation was lower than 6%. On the basis of the results obtained in this work, the conducting molecularly imprinted polymer films as absorbent have been applied in the electrochemically controlled solid‐phase microextraction and ion mobility spectrometry system for the selective clean‐up and quantification of trace amounts of anti‐inflammatory drugs in human serum samples. Scanning electron microscopy has confirmed the nano‐structure morphology of the polypyrrole film.     

Lanthanum-selective sensors based on 3-amino-2-mercapto-3H-quinazolin-4-one in PVC matrix

A new solvent polymeric membrane (PME) and coated graphite (CGE) electrodes based on 3-amino-2-mercapto-3H-quinazolin-4-one as a suitable carrier for La(III) ion are described. The sensors exhibited a Nernstian response for La(III) ion over a wide concentration range (3.0 × 10^?7 to 1.0 × 10^?1 M for PME and 1.0 × 10^?7 to 1.0 × 10^?1 M for CGE) with a slope of 20.1 ± 0.3 (PME) and 23.4 ± 0.4 (CGE) mV decade^?1. The lower detection limits by PME and CGE were 2.0 × 10^?7 and 7.1 × 10^?8 M, respectively. The potentiometric response of the proposed electrodes was independent of the pH of the test solution in the pH range 3.0–9.0 with a fast response time (<10 s). The applications of prepared sensors were demonstrated in the determination of lanthanum ions in spiked water sample and also utilized for indirect determination of fluoride content of two mouth wash preparation samples.     

A mild and green chemistry approach for the synthesis of symmetrical spirooxindole derivatives

A simple and eco-friendly synthesis of the biologically important spirooxindole scaffold was done by the reaction of isatin with activated pyrazolones in the presence of a catalytic amount of p-toluenesulfonic acid in water at room temperature. A variety of symmetrical spirooxindole derivatives were obtained with excellent yields within short reaction time. This method is of great value because of its environmentally benign character, high yield, and easy handling.     

Effect of silver nanoparticles concentration on the metal enhancement and quenching of ciprofloxacin fluorescence intensity

Concentration effect of silver nanoparticles (AgNPs) on the photophysical properties of ciprofloxacin (Cip) have been investigated using optical absorption and fluorescence techniques. When performed AgNPs solution was added to the Cip solution, metal-enhanced fluorescence intensity and a blue-shift of 20 nm in the maximum emission spectra of Cip has been observed. The enhanced intensity of this system is strongly dependent on the AgNPs concentration and largest at the 6.0 × 10^?6 mol L^?1. With increase of AgNPs concentration, quenching of fluorescence is observed. Stern–Volmer quenching constants have been calculated at four temperatures. The results show the quenching constants are directly correlated with temperature. It indicates the quenching mechanism is the dynamic quenching in nature rather than static quenching. From which we determined the activation energy for the quenching of Cip-AgNPs to be about 31.1 kJ mol^?1. In addition, in the presence of optimum AgNPs concentration, a sensitive fluorimetric method for the determination of ciprofloxacin at the range 5.0 × 10^?7–3.0 × 10^?5 mol L^?1 and the detection limit of 2 × 10^?8 mol L^?1 in solution is proposed.     

Fe(NO3)3·9H2O as Efficient Catalyst for One‐pot Synthesis of Highly Functionalized Piperidines

Fe(NO₃)₃·9H₂O is used as an efficient and effective catalyst for the one‐pot three‐component synthesis of highly functionalized piperidines from aromatic aldehydes, anilines and b–ketoesters in ethanol at ambient temperature. This procedure includes some important aspects like the easy work‐up, no need to column chromatography, simple and readily available precursors, and good to high yields.     

Synthesis of 2‐Aryl‐5‐oxo‐4‐[2‐(phenylmethylidene)hydrazino]‐2,5‐dihydro‐1H‐pyrrole‐3‐carboxylates by the Reaction between Hydrazones,Acetylenedicarboxylates, and 1‐Aryl‐N,N′‐bis(arylmethylidene)methanediamines

An efficient approach for the preparation of functionalized 2‐aryl‐2,5‐dihydro‐5‐oxo‐4‐[2‐(phenylmethylidene)hydrazino]‐1H‐pyrroles is described. The four‐component reaction between aldehydes, NH₂NH₂?H₂O, dialkyl acetylenedicarboxylates, and 1‐aryl‐N,N′‐bis(arylmethylidene)methanediamines proceeds in EtOH under reflux in good‐to‐excellent yields (Scheme 1). The structures of 4 were corroborated spectroscopically (IR, ¹H‐ and ¹³C‐NMR, and EI‐MS, and, in the case of 4f , by X‐ray crystallography). A plausible mechanism for this type of reaction is proposed (Scheme 2).     

Anodic stripping voltammetry of silver(I) using a carbon paste electrode modified with multi-walled carbon nanotubes

We describe a silver(I)-selective carbon paste electrode modified with multi-walled carbon nanotubes and a silver-chelating Schiff base, and its electrochemical response to Ag(I). Effects of reduction potential and time, accumulation time, pH of the solution and the stripping medium were studied by differential pulse anodic stripping voltammetry and optimized. The findings resulted in a method for the determination of silver over a linear response range (from 0.5 to 235 ng?mL^?1) and with a detection limit as low as 0.08 ng?mL^?1. The sensor displays good repeatability (with the RSD of ±?2.75 % for 7 replicates) and was applied to the determination of Ag(I) in water samples and X-ray photographic films.

Molecularly imprinted nanoparticles-based electrochemical sensor for determination of ultratrace parathion in real samples

Molecularly imprinted polymer nanoparticles (nano-MIP), containing parathion selective sites, were synthesized by using suspension polymerization in silicon oil and then used for carbon paste electrode preparation. The obtained electrode was applied as an electrochemical sensor for parathion determination in different fruit and vegetable samples. Different factors including electrode composition, conditions of parathion extraction in the electrode and electrochemical measurement conditions were evaluated and then optimized by using various techniques of screening and response surface experimental designs. Electrode response to parathion (Res₁) and its selectivity for parathion (Res₂) were the desired responses. These responses were optimized simultaneously. After optimization, a sensor with high selectivity and picomolar detection limit were obtained. It was shown that the sensor response to parathion concentration was linear in the concentration range of 0.05 to 150?nmol?L^?1. The detection limit of designed sensor was calculated equal to 0.02?nmol?L^?1. The developed determination method was properly used for ultra-trace level assay of parathion in different fruit and cabbage samples.     

Piperidine–iodine a dual system catalyst for synthesis of coumarin bearing pyrrolo[1,2-a]quinoxaline derivatives via a one-pot three-component reaction

The synthesis of 3-(4-alkyl-4,5-dihydropyrrolo[1,2-a]quinoxalin-4-yl)-2H-chromen-2-one derivatives by a three-component reaction of salicylaldehyde, β-keto esters, and 1-(2-aminophenyl)pyrrole using piperidine–iodine as a dual system catalyst is reported. Good yields, mild reaction conditions, and ease of handling are the main aspects of the method. The structural assignments are supported by ¹H NMR, ¹³C NMR, and X-ray crystallography data.