Efficient Synthesis of Differentiated syn‐1,2‐Diol Derivatives by Asymmetric Transfer Hydrogenation–Dynamic Kinetic Resolution of α‐Alkoxy‐Substituted β‐Ketoesters

Asymmetric transfer hydrogenation was applied to a wide range of racemic aryl α‐alkoxy‐β‐ketoesters in the presence of well‐defined, commercially available, chiral catalyst Ru^II–(N‐p‐toluenesulfonyl‐1,2‐diphenylethylenediamine) and a 5:2 mixture of formic acid and triethylamine as the hydrogen source. Under these conditions, dynamic kinetic resolution was efficiently promoted to provide the corresponding syn α‐alkoxy‐β‐hydroxyesters derived from substituted aromatic and heteroaromatic aldehydes with a high level of diastereoselectivity (diastereomeric ratio (d.r.)>99:1) and an almost perfect enantioselectivity (enantiomeric excess (ee)>99 %). Additionally, after extensive screening of the reaction conditions, the use of Ru^II‐ and Rh^III‐tethered precatalysts extended this process to more‐challenging substrates that bore alkenyl‐, alkynyl‐, and alkyl substituents to provide the corresponding syn α‐alkoxy‐β‐hydroxyesters with excellent enantiocontrol (up to 99 % ee) and good to perfect diastereocontrol (d.r.>99:1). Lastly, the synthetic utility of the present protocol was demonstrated by application to the asymmetric synthesis of chiral ester ethyl (2S)‐2‐ethoxy‐3‐(4‐hydroxyphenyl)‐propanoate, which is an important pharmacophore in a number of peroxisome proliferator‐activated receptor α/γ dual agonist advanced drug candidates used for the treatment of type‐II diabetes.     

A new dabco templated metal sulfate, (C6H14N2)[Mn (H2O)6](SO4)2. Chemical preparation, hydrogen-bonded structure and thermal decomposition

The crystal structure of manganese sulfate templated by 1,4-diaza-bicyclo[2.2.2]octane (abbreviated dabco), (C₆H₁₄N₂)[Mn(H₂O)₆](SO₄)₂, was investigated using single crystal X-ray diffraction data. It crystallises in the monoclinic system (space group P2₁/c) with the following unit-cell parameters: a = 12.1392(2) ?, b = 12.3117(2) ?, c = 12.2765(2) ?, β = 104.607(1)°, V = 1775.47(5) ?³ and Z = 4. The structure has been solved using direct methods and refined by least-squares analysis [R ₁ = 0.0381, wR ₂ = 0.1082]. The crystal structure of the title compound is built from isolated [Mn(H₂O)₆]²⁺ octahedral cations, 1,4-diaza-bicyclo[2.2.2]octandiium cations (C₆H₁₄N₂)²⁺ and sulfate anions (SO₄)²⁻ connected by a three-dimensional hydrogen-bond network. The thermal decomposition of the precursor, studied by thermogravimetry and temperature-dependent X-ray powder diffraction, proceeds through four stages giving rise to the mixture of Mn₂O₃and Mn₃O₄. Supplementary Material CCDC 620298 contains the supplementary crystallographic data for this paper. These data can be obtained free of charge from The Cambridge Crystallographic Data Centre via www.ccdc.cam.ac.uk/data_request/cif.     

Synthesis and structural characterization of dihexamethylenetetraminetetraaquocobalt(II) hexaaquocobalt(II) sulfate hexahydrate

The synthesis and crystal structure of a new three dimensional cobalt(II) complex [Co(C₆H₁₂N₄)₂(H₂O)₄Co(H₂O)₆][SO₄]₂.6H₂O are reported. It crystallizes in the triclinic space group P-1 with a = 13.394(3), b = 16.077(3), c = 9.282(2) Å, = 89.71(2), = 90.42(2), = 114.02(2)°, V = 1825.6(7)ų and Z = 2. The structure is comprised of [Co(C₆H₁₂N₄)₂ (H₂O)₄Co(H₂O)₆][SO₄]₂ units and H₂O molecules. Two molecules of ligand and four molecules of water chelate one type of Co^II in an octahedral fashion through two N and four O atoms: the four O atoms form the equatorial plane and the two N atoms occupy the apical positions. The other type of Co^II cation is chelated by six water molecules.     

Synthesis and evaluation of a broad range of new chiral phosphine–carbene ligands for asymmetric hydrogenation

A straightforward and gram scale synthesis (six-step synthesis from enantioenriched β-hydroxy esters) of new structurally simple phosphine-carbene ligands bearing a single stereogenic centre has been achieved. Enantioselectivities of up to 60-63% could be achieved in the hydrogenation of methylstilbene and dehydroaminoacids when the reactions were performed under 20-50 bar hydrogen pressure.     

Unified path integral treatment for generalized Hulthén and Woods-Saxon potentials

A rigorous path integral discussion of the s states for a diatomic molecule potential with varying shape, which generalizes the Hulthén and the Woods-Saxon potentials, is presented. A closed form of the Green’s function is obtained for different shapes of this potential. For λ ? 1 and (1/η)lnλ<r<∞, the energy spectrum and the normalized wave functions of the bound states are derived. When the deformation parameter λ is 0 < λ < 1 or λ < 0, it is found that the quantization conditions are transcendental equations that require numerical solutions. The special cases corresponding to a screened potential (λ = 1), the deformed Woods-Saxon potential (λ = q e^ηR), and the Morse potential (λ = 0) are likewise treated.     

Analytical modelling of spur gear tooth crack and influence on gearmesh stiffness

Due to excessive service load, inappropriate operating conditions or simply end of life fatigue, damage can occur in gears. When a fault, either distributed or localised, is incurred by gears, the stiffness and consequently vibration characteristics of the damaged tooth will change. In this work an analytical formulation of the time varying gearmesh stiffness was derived. An original analytical modelling of tooth cracks is presented and the gearmesh stiffness reduction due to this fault is quantified. A comparison with finite element model is presented in order to validate the analytical formulation.     

Hydrolytically stable acidic monomers used in two steps self-etch adhesives

This study deals with the stability of new phosphonic monomers bearing an acrylamide moiety designed to increase the adhesion durability. Synthesis of monomers bearing acrylamide and methacrylate moieties, as well as their use in Self-Etch Adhesives is reported. The adhesion of a degraded methacrylate based adhesive has been evaluated. Homologous self-etching primers containing monomers bearing acrylamide or methacrylate were formulated and used either immediately after formulation or after 18 months. Their adhesive performances were assessed by shear bond strength testing and their degradation measured by NMR, HPLC-MS. While no differences were found in terms of adhesion between fresh and aged acrylamide based adhesive, the instability of methacrylate based ones was demonstrated. Nevertheless, methacrylate based SEAs still have good adhesion abilities. The co-monomer used, N,N′-diethyl-1,3-bis(acrylamido)propane is expected to be responsible for good mechanical properties even for degraded SEAs. Lastly, the stability of acrylamide monomer seems to be of interest in the prospect of developing SEA with longer shelf life.     

Role of iron in Na <Subscript>1.5</Subscript>Fe <Subscript>0.5</Subscript>Ti <Subscript>1.5</Subscript>(PO <Subscript>4</Subscript>) <Subscript>3</Subscript>/C as electrode material for Na-ion batteries studied by operando Mössbauer spectroscopy

The role of iron in Na _1.5Fe _0.5Ti _1.5(PO ₄)₃/C electrode material for Na batteries has been studied by ⁵⁷Fe Mössbauer spectroscopy in operando mode. The potential profile obtained in the galvanostatic regime shows three plateaus at different voltages due to different reaction mechanisms. Two of them, at 2.2 and 0.3 V vs Na ⁺/Na ⁰, have been associated to redox processes involving iron and titanium in Na _1.5Fe _0.5Ti _1.5(PO ₄)₃. The role of titanium was previously elucidated for NaTi ₂(PO ₄)₃ and the effect of the substitution of Fe for Ti was investigated with ⁵⁷Fe Mössbauer spectroscopy. We show that iron is an electrochemically active center at 2.2 V with the reversible Fe ³⁺/Fe ²⁺ transformation and then remains at the oxidation state Fe ²⁺ along the sodiation until the end of discharge at 0 V.     

Efficient enantioselective synthesis of 3-aminochroman derivatives through ruthenium-Synphos catalyzed asymmetric hydrogenation

A highly enantioselective asymmetric hydrogenation of various trisubstituted enamides derived from chroman-3-ones promoted by cationic Ru-Synphos catalysts is reported. This atom-economical and clean method provides an efficient route to optically active 3-aminochroman derivatives, which are important pharmacophores found in numerous drug candidates, in high chemical yields and enantiomeric excesses up to 96%.     

Size-dependent magnetic properties of CoFe2O4 nanoparticles prepared in polyol

Highly crystalline CoFe(2)O(4) nanoparticles with different diameters ranging from 2.4 to 6.1 nm have been synthesized by forced hydrolysis in polyol. The size can be controlled through adjusting the nominal water/metal molar ratio. X-ray diffraction, transmission electron microscopy, x-ray absorption spectroscopy and (57)Fe M?ssbauer spectrometry were employed to investigate the structure and the microstructure of the particles produced. Magnetic measurements performed on these particles show that they are superparamagnetic with a size-dependent blocking temperature. At 5 K, high saturation magnetization (~85 emu g(-1)) approaching that of the bulk was found for the larger particles, whereas a very large coercivity (14.5 kOe) is observed for the 3.5 nm sized particles.