Spectrophotometric determination of some drugs for osteoporosis

Three simple, accurate and sensitive spectrophotometric methods are developed for the determination of some new drugs for the treatment of osteoporosis: risedronate sodium (I), alendronate sodium (II) and etidronate disodium (III). The first method is based on the measurement of difference in absorbance (Delta A) of risedronate sodium in 0.01 mol l(-1) hydrochloric and 0.1 mol l(-1) sodium hydroxide at 262 nm. Beer's law is obeyed over a concentration range of 15-150 microg ml(-1) with mean recovery 99.75+/-1.22 and molar absorptivity (epsilon) 1.891 x 10(3). The second method is based on the reaction of the primary amino group of (II) with ninhydrin reagent in methanolic medium in the presence of 0.05 mol l(-1) sodium bicarbonate. The colored product is measured at 568 nm, and the linearity range is found to be 3.75-45 microg ml(-1) with mean recovery 99.77+/-0.73 and epsilon 9.425 x 10(3). The third method is based on oxidation of the three mentioned drugs with ceric (IV) sulphate in 0.5 mol l(-1) sulphuric acid at room temperature and subsequent measurement of the excess unreacted cerium (IV) sulphate at 320 nm. The method obeyed Beer's law over a concentration range of 2-24 microg ml(-1) for the three drugs with mean recovery 99.79+/-1.16, 99.73+/-1.38 and 99.86+/-1.13 and epsilon 14.427 x 10(3), 13.813 x 10(3) and 14.000 x 10(3) for drugs I, II, III respectively. The proposed methods were successfully applied for the determination of the studied drugs in bulk powder and in pharmaceutical formulations. The results were found to agree statistically with those obtained the reported methods. Furthermore, the methods were validated according to USP regulations and also assessed by applying the standard addition technique.     

Electrochemical disk generation and ring identification of carbanions from organomercurials in acetonitrile

A rotating disk-ring electrode was used for study of a series of organomercury compounds R₂Hg, where R = CN, CF(NO₂)₂, C₆F₅, PhCC, p-NO₂C₆H₄OCC, PhSCH₂CC, PhCOCH₂, CH₂CN, CCl₂CCl, 2-phenyl-o-carboranyl. Reduction of these compounds at a Pt-disk in acetonitrile is a two-electron process and results in generation of the carbanion R^?. The carbanions generated at the disk interact with the solvent during their convective diffusion to the ring electrode where there may be oxidized. The main reaction in solution, shown using chromatography-mass spectrometry techniques, is acid-base interaction of carbanions with the solvent acetonitrile, which acts as a Brönsted acid. Reaching the ring, the carbanions may be oxidized at anodic potentials of the ring; oxidation potentials depend significantly on carbanion structure (e.g.+0.28 V (vs. SCE), for PhCC^? and +2.20 V for CN^?. It is shown that PK_a value of the carbanions do not correlate with the oxidation potentials, however, a linear correlation is observed between pK_a values and a special parameter called the efficiency coefficient.     

New Clerodane Diterpenoids from Casearia membranacea

Bioassay‐guided fractionation of an AcOEt extract of Casearia membranacea resulted in the isolation of six new clerodane diterpenes, caseamembrins G–L ( 1 – 6 ). The structures of the new compounds, including their relative configurations, were established by an extensive study of their spectral data, especially 2D NMR. The cytotoxic activities of the isolated diterpenes against human oral epidermoid (KB), cervical epitheloid (Hela), and liver (Hep59T/VGH) carcinoma cell lines were investigated.     

Spectroscopic and thermodynamic studies on solvatochromic nickel(II) complexes

Summary The solvatochromic and thermochromic behaviour of a series of mixed Ni(II) complexes with unsubstituted and substituted -diketones and diamines in the solvents 1,2-dichloroethane (DCE), acetonitrile (An), acetone (AC),n-butanol (n-BuOH), formamide (FA), N,N-dimethylformamide (DMF), dimethylsulfoxide (DMSO) and pyridine (PY) has been studied and characterized on the basis of electronic spectra. Spectrophotometric methods have been used to evaluate equilibrium constants and their enthalpic and entropic terms for the formation of Ni(-dik)(diam)L ⁺ and Ni(-dik)(diam)L ₂ ⁺ . Increasing donor strength of the donor-solvents (L) and (or) increasing electronwithdrawing parameters of the substituents at the -diketone and the diamine ligands lead to increasing formation constants, paralleled by relative increase in the stability of the five-coordinated species Ni(-dik)(diam)L ⁺. The results are discussed in terms of the extended donor-acceptor concept.On leave of absence from the Faculty of Education, Ain Schams University, Roxy, Cairo, Egypt     

A simple homemade spectrophotometer

A simple portable spectrophotometer was constructed and used to perform analytical experiments. The developed model uses available tools and materials such as light emitting diode lamps, compact discs, plastic and cardboard boxes and a cell phone camera to build a design that illustrates the major components of spectrophotometers. The spectra of serial concentrations of KMnO₄ (50?600 μM) were recorded and the values of absorbance were extracted at λ_max to build the calibration curve. A linear relationship between the concentration and absorbance was obtained with the coefficient of determination 0.994. The model was also utilized to study the spectra of KMnO₄, phenolphthalein and bromothymol blue in comparison with a Shimadzu UV-1800 spectrophotometer as a reference instrument. In spite of the differences in the observed spectra, the recorded λ_max were almost identical to those measured by the developed model. The model was successfully used to determine the concentration of sodium alendronate through ligand-exchange complexation with ferric salicylate.     

Synthesis,spectral, DFT calculations and biological studies of solvatochromic copper(II)-ONS hydrazone derived from 2-aminochromone-3-carboxaldehyde

New ONS hydrazone ligand, 2-[(2-aminochromon-3-yl)methylidene]-N-phenylhydrazinecarbothioamide, HL , was synthesized and reacted with different salts of Cu (II) ion (OAc⁻, NO₃⁻, SO₄²⁻ and Cl⁻) in absence and presence of secondary ligands (L′); 8-hydroxyquinoline, 1,10-phenanthroline or SCN⁻; to form binary and ternary Cu(II)-chelates. The ligand and its Cu(II)-complexes were fully characterized by analytical, spectral, thermal, conductivity and magnetic susceptibility measurements. The metal chelates showed octahedral, square planar and /or distorted tetraherdal arrangements. Coats–Redfern equations used to calculate the kinetic parameters of the thermal decomposition stages (E_a, A, ΔH, ΔS and ΔG). The compounds exhibit luminescence property; promising interesting potential applications as photoactive materials. Lippert–Mataga, Bakhshiev, Kawski–Chamma–Viallet and microscopic solvent polarity parameter and E_T^N correlation methods were applied on the solvatochromic shifts of emission spectra to evaluate the ground (μ_g) and excited (μ_e) states dipole moments. Excited state dipole moment is larger than the ground state which may be attributed to π-π* transition. The coordinating anions play an important role on the position and intensity of emission band. The ligand and its metal complexes showed antimicrobial activity towards Gram–positive bacteria, Gram–negative bacteria, yeast and fungus. The molecular structural parameters of HL and its Cu(II)- complexes have been calculated on the basis of DFT engaged in the Gaussian 09 program at the B3LYP/6-31G(d,p) level; the theoretical data are correlated with the experimental data.     

Photoconductivity,Antioxidant, and Antimicrobial Activities of Some Acenaphthenequinone Derivatives

Russian Journal of General Chemistry - Photoconductive acenaphthenequinone derivatives have been synthesized by a one-pot process of acenaphthenequinone with different aromatic hydrazides...     

Kinetics and thermodynamics of uranium ion adsorption from waste solution using Amberjet 1200 H as cation exchanger

The present work deals with the adsorption of uranium from a nitric acid waste solution using the cation exchange resin Amberjet 1200 H (AHR) . Batch experiments were performed in order to assess the performance of AHR in uranium adsorption. The influences of pH, contact time, initial uranium concentration and temperature have been enhanced. The physical parameters including the adsorption kinetics, the isotherm models and the thermodynamic data have also been determined to determine the nature of the uranium adsorption by AHR. The studied resin has been agreed with both the pseudo second order reaction and Langmuir isotherm.