Development of a non-invasive method for the determination of the macroscopic neutron cross sections of a sample matrix in large-sample prompt-gamma neutron activation analysis

In order to correct for neutron self-shielding in large-sample prompt gamma NAA, a method has been developed to determine the macroscopic scattering and absorption cross sections, i.e., Σ _a and Σ _s, using four Cu flux monitors placed around the sample. With Monte Carlo computations, the neutron densities throughout the sample and the resulting and the corresponding self-shielding factor as calculated from the Σ _a and Σ _s as obtained through the Cu monitors were compared to the true values. The derived Σ _a and Σ _s were found to be sufficiently accurate as long as Σ _t = Σ _a + Σ _s was less than 0.6 cm⁻¹ and Σ _s/Σ _t was greater than 0.1.     

Thermal analysis and microscopical characterization of cholesterol in gallstones

Summary Cholesterol constitutes the major component of most gallstones. It was identified and determined in gallstones by thermal analysis technique (DSC and TG-DTA), mainly by the use of the melting temperature (T_onset=145°C and T_max=149°C) and by DTG peak decomposition (T_max=364°C). Cholesterol anhydrous (ChA), which showed endothermic polymorphic peak, T_max=40°C, without mass loss, was differentiated from cholesterol monohydrate (ChH), which showed a broad endothermic peak, T_max=59°C, attributed to loss of water of crystallization (theoretical 4.45%). Morphological studies of gallstones were performed by optical microscopy and scanning electron microscopy (SEM). The stones consisted of a pigmented core with a variably-sized irregular central cavity, surrounded by a radially arranged deposits of plate-like ChH. The outer part of the stones showed ChA crystal arborescences. X-ray microanalysis gave a typical spectrum rich in C and O, and in some instances the presence of P, which was attributed to the presence of phospholipids. CaCO₃ was easily characterized by TG with the use of DTG decomposition peak at 674°C.     

Photocatalytic oxidation of phenol in aqueous solutions with oxygen catalyzed by supported metallophthalocyanine catalyst

In this paper, zinc tetraaminophthalocyanine (Zn-APc) was immobilized on cellulosic fiber by covalent bond to obtain a novel cellulosic fiber supported metallophthalocyanine, named Zn-TDTAPc-F. At pH 11, upon visible light irradiation for 6 h in the presence of O2, Zn-TDTAPc-F was found to be highly effective for the degradation of phenol in aqueous solution, and the degradation rate of phenol was more than 95%. HPLC was used to confirm formic acid, fumaric acid and maleic acid as its main degradation products.     

Tricarbonyl(N,N-Disubstituted-Cyclohexadienecarboxamide)iron Complexes: Investigation of the Possible Intramolecular Interaction between the Iron Center and the Amide Substituent

Direct reaction of iron pentacarbonyl with 1-N,N-disubstituted-cyclohexa-2,5-dicnecarboxamide and 1-N,N-disubstituted-cyclohexa-1,3-dienecarboxamide mixture (in which the disubstkuted group is diethyl or diphenyl) gave the isomeric tricarbonyl iron complexes of 2-N,N-disubstituted-1,4-η-cyclohexa-1,3-dienccarboxamide (1), 1-N,N-disubslituted-1,4-η-cyclohexa-1,3-dienecarboxamide (2), and 5-N,N-disubstituted-1,4-η-cyclohexa-1,3-dienecarboxamide (3) and tricarbonyliron complexes of l-N,N-disubstituted-cyclohexenecarboxamide (4). These complexes were separated and characterized by IR, UV-VIS, ¹H NMR, elemental analysis, and mass spectra. Only 1 isomerized to give 2 under acidic conditions; both 1 and 2 undergo hydride abstraction with triphenylmethyl hexafluorophosphatc. Complexes 3, undergo neither isomcrization nor hydride abstraction. According to the spectral data, the possible interaction between carboxamide and iron carbonyl moiety was investigated. The irreversible electrochemical behavior of these complexes were studied.     

Paradigms and paradoxes: patterns and estimation of the entropy of formation of aqueous hydrogen containing mono and polynuclear oxyanions

“Simple” energetic patterns, where simple means the use of parameters derived only from the stoichiometry of these species, are relatively rarely discussed in the literature. In addition, entropy studies have been dominated by derivation of the absolute quantity S° rather than the entropy of formation (TΔ_f S ^o). Relationships between the entropy of formation and different parameters such as negative value of the charge of the species, the number of oxygen atoms, the natural logarithm of the molecular weight, the total number of atoms and the number of central atoms that are gases were recently discussed by us for aqueous polynuclear oxyanions. As shown here hydrogen containing anions do not follow this pattern. In this study, new approaches for the estimation of the entropy of formation of aqueous hydrogen containing mono and polynuclear oxyanions are suggested, evaluated and recommended.     

Synthesis and conformational analysis by 1H NMR and restrained molecular dynamics simulations of the cyclic decapeptide [Ser-Tyr-Ser-Met-Glu-His-Phe-Arg-Trp-Gly]

Summary The design of enzyme mimics with therapeutic and industrial applications has interested both experimental and computational chemists for several decades. Recent advances in the computational methodology of restrained molecular dynamics, used in conjunction with data obtained from two-dimensional ¹H NMR spectroscopy, make it a promising method to study peptide and protein structure and function. Several issues, however, need to be addressed in order to assess the validity of this method for its explanatory and predictive value. Among the issues addressed in this study are: the accuracy and generizability of the GROMOS peptide molecular mechanics force field; the effect of inclusion of solvent on the simulations; and the effect of different types of restraining algorithms on the computational results. The decapeptide Ser-Tyr-Ser-Met-Glu-His-Phe-Arg-Trp-Gly, which corresponds to the sequence of ACTH_1–10, has been synthesized, cyclized, and studied by two-dimensional ¹H NMR spectroscopy. Restrained molecular dynamics (RMD) and time-averaged restrained molecular dynamics (TARMD) simulations were carried out on four different distance-geometry starting structures in order to determine and contrast the behavior of cyclic ACTH_1–10 in vacuum and in solution. For the RMD simulations, the structures did not fit the NOE data well, even at high values of the restraining potential. The TARMD simulation method, however, was able to give structures that fit the NOE data at high values of the restraining potential. In both cases, inclusion of explicit solvent molecules in the simulation had little effect on the quality of the fit, although it was found to dampen the motion of the cyclic peptide. For both simulation techniques, the number and size of the NOE violations increased as the restraining potential approached zero. This is due, presumably, to inadequacies in the force field. Additional TARMD vacuum-phase simulations, run with a larger memory length or with a larger sampling size (16 additional distance-geometry structures), yielded no significantly different results. The computed data were then analyzed to help explain the sparse NOE data and poor chymotryptic activity of the cyclic peptide. Cyclic ACTH_1–10, which contains the functional moieties of the catalytic triad of chymotrypsin, was evaluated as a potential mimic of chymotrypsin by measurement of the rate of hydrolysis of esters of L-and d-phenylalanine. The poor rate of hydrolysis is attributed to the flexibility of the decapeptide, the motion of the side chains, which result in the absence of long-range NOEs, the small size of the macrocycle relative to that of the substrate, and the inappropriate orientation of the Gly, His, and Ser residues. The results demonstrate the utility of this method in computer-aided molecular design of cyclic peptides and suggest structural modifications for future work based on a larger and more rigid peptide framework.     

Ferromagnetism in Metallocene-Doped Fullerenes

 Ferromagnetism in fullerene-based systems doped with metallocenes is reviewed. These compounds form a ferromagnetic state by spin-coupling between π electrons on fullerene units, while the metallocene molecules do not contribute to the spin ordering. One of these compounds has the highest critical temperature (19 K) for this class of compound. The magnetic properties of these materials are very strongly dependent on the crystallization conditions. Corresponding author. E-mail: Dragan.Mihailovic@ijs.si Received September 4, 2002; accepted September 6, 2002     

An Education in Robustness

A case study is presented of the application of robustness analysis to the choice of examination subjects to be made by a 14-year-old girl. The analysis is conducted in terms of the desirable future career options which may be preserved by different combinations of subjects, and also of the balance with topics selected for their intrinsic interest. The approach, which employs very limited technical apparatus, is justified on a number of grounds-in particular, the crucial importance of uncertainty, and the need for understanding and acceptance by a "client" very unlike the corporate manager. Some tentative conclusions are reached on the extension of such methods to other cases of decision-makers with little, if any, resources to control except their own lives.     

Methods for Determining the Re-order Point of an (<Emphasis Type="Italic">s</Emphasis>, <Emphasis Type="Italic">S</Emphasis>) Ordering Policy when a Service Level is Specified

This paper deals with a periodic review inventory system. Methods are discussed for determining the re-order point s of an (s, S) order policy, when a certain service level is required. The results differ from those presented for a (Q, s) model which is usually considered in literature and implemented in practice. Methods are discussed for determining the re-order point of an (s, S) policy when demand is normal or gamma distributed. A numerical investigation demonstrates the applicability of the described methods. In particular, it is shown that these methods are superior to a formula that is implemented in many inventory control systems.     

Atomic radical—molecule reactions F + CH<Subscript>3</Subscript>C≡CH: mechanistic study

The reaction of atomic radical F with propyne has been studied theoretically using ab initio quantum chemistry methods and transition state theory. The potential energy surface was calculated at the CCSD(T)/aug-cc-pVDZ (single-point) level using the UMP2/6-311++G(d,p) optimized structures. Two reaction mechanisms including the addition–isomerization–elimination reaction mechanism and the directed hydrogen abstraction reaction mechanism are considered. For the hydrogen abstraction reactions, i.e., the most probable evolution pathway in the title reaction, the HF formation occurs via direct abstraction mechanism dominantly and the H atom picked up by the atomic radical F should come mostly from the methyl group of normal propyne. On the other hand, for the addition–isomerization–elimination mechanism, the most feasible pathway should be the atomic radical F attacking on the C≡C triple bond in propyne (CH₃C≡CH) to form a weakly-bound adduct A1 with no barrier, followed by F addition to the C≡C triple bond to form the low-lying intermediate isomer 5. Subsequently, isomer 5 directly dissociates to P3 H₂CCCHF + H via transition state TS₅/P3. The other reaction pathways on the doublet PES are less competitive due to thermodynamical or kinetic factors. Furthermore, based on the analysis of the kinetics of all channels through which the addition and abstraction reaction proceed, we expect that the competitive power of reaction channels may vary with experimental conditions for the title reaction. The present work will provide useful information for understanding the processes of atomic radical F reaction with other unsaturated hydrocarbons. This material is available from author via E-mail.