Designed Synthesis of Well‐Defined Pd@Pt Core–Shell Nanoparticles with Controlled Shell Thickness as Efficient Oxygen Reduction Electrocatalysts

Improving the electrocatalytic activity and durability of Pt‐based catalysts with low Pt content toward the oxygen reduction reaction (ORR) is one of the main challenges in advancing the performance of polymer electrolyte membrane fuel cells (PEMFCs). Herein, a designed synthesis of well‐defined Pd@Pt core–shell nanoparticles (NPs) with a controlled Pt shell thickness of 0.4–1.2 nm by a facile wet chemical method and their electrocatalytic performances for ORR as a function of shell thickness are reported. Pd@Pt NPs with predetermined structural parameters were prepared by in situ heteroepitaxial growth of Pt on as‐synthesized 6 nm Pd NPs without any sacrificial layers and intermediate workup processes, and thus the synthetic procedure for the production of Pd@Pt NPs with well‐defined sizes and shell thicknesses is greatly simplified. The Pt shell thickness could be precisely controlled by adjusting the molar ratio of Pt to Pd. The ORR performance of the Pd@Pt NPs strongly depended on the thickness of their Pt shells. The Pd@Pt NPs with 0.94 nm Pt shells exhibited enhanced specific activity and higher durability compared to other Pd@Pt NPs and commercial Pt/C catalysts. Testing Pd@Pt NPs with 0.94 nm Pt shells in a membrane electrode assembly revealed a single‐cell performance comparable with that of the Pt/C catalyst despite their lower Pt content, that is the present NP catalysts can facilitate low‐cost and high‐efficient applications of PEMFCs.     

Tetrahedral atom ordering in a zeolite framework: a key factor affecting its physicochemical properties

Three gallosilicate natrolites with closely similar chemical composition but differing in the distribution of Si and Ga over crystallographically different tetrahedral sites (T-sites) show striking differences in their cation exchange performance. The ability to exchange Na(+) by the larger alkali metal cations decreases upon increasing the size of the cation, as expected, but also with the degree of T-atom ordering. To seek an insight into this phenomenon, the crystal structures of 11 different zeolites, which show variations in degree of T-atom ordering, nature of countercation, and hydration state, have been refined using synchrotron diffraction data. While the three as-made sodium materials were characterized to have a low, medium, and high degree of ordering, respectively, their pore sizes are close to the size of the bare Na(+) cation and much smaller than that of the larger alkali cations, which are nonetheless exchanged into the materials, each one at a different level. Interestingly, large differences are also manifested when the Na(+) back-exchange is performed on the dehydrated K(+) forms, with crystallographic pore sizes too small even to allow the passage of Na(+). Although the thermodynamic data point to small differences in the enthalpy of the Na(+)/K(+) exchange in the three materials, comparison of the "static" crystallographic pore sizes and the diameter of the exchanged cations lead us to conclude that during the exchange process these zeolites undergo significant deformations that dynamically open the pores, allowing cation traffic even for Cs(+) in the case of the most disordered material. In addition to the very large topological flexibility typical of the natrolite framework, we propose as a hypothesis that there is an additional flexibility mechanism that decreases the rigidity of the natrolite chain itself and is dependent on preferential siting of Si or Ga on crystallographically different T-sites.     

Dimesogenic liquid crystal consisting of cholesterol and Schiff base moieties: dependence of LC properties on the spacer length and fluorination of the alkoxy tails

The liquid crystalline properties of two series of non‐symmetric liquid crystal dimers consisting of cholesterol and Schiff base moieties interconnected by ω‐oxyalkanoyl spacers of varying length are compared: one series (SBOC‐ n ) carry the octyloxy tail on the Schiff base mesogen, and the other (SBOF‐ n ) a perfluoroheptylmethyloxy tail. In general, compounds with the fluorinated alkoxy tail exhibited mesophases over a much wider temperature range than those with the alkoxy tail. The latter series favoured the formation of more diverse mesophases than the former. SBOC‐4, ‐5 and ‐7, and SBOF‐4, ‐5 and ‐10 formed the chiral smectic C phase.     

The Reaction of Ninhydrin with Trimethylbenzenes under Friedel-Crafts Reaction Conditions

The reaction of ninhydrin with 1,2,3- and 1,2,4-trimethylbenzene in the presence of H₂SO₄ or AlCl₃ afforded 2-monoaryl and 2,2-diaryl-1,3-indanedione derivatives as the major products. With 1,3,5-trimethylbenzene as the arene nucleophile, either a reduction product or an indenoindanone derivative was obtained depending upon the catalyst employed in the reaction.     

Studies on the Complexes of N,N′-Bis[o-(diphenylphosphino)benzylidene]ethylenediamine with Transition Metal Ions

The thermodynamic parameters for the interaction of Cu²⁺, Ni²⁺, Co²⁺, Cd²⁺, andAg⁺ with the new title ligand have been determined by titration calorimetry in 50% THF–methanol (V/V) at 25 °C.Ag⁺ exhibited remarkably higher complexation selectivity.Ag⁺ and several transition metal ions have been transportedusing this ligand as carrier in a bulk liquid membrane. CompetitiveAg⁺–M²⁺ transport studies have also beencarried out for the same system. In this membrane transport study, high transport of Ag⁺ was observed in both single and competitiveAg⁺–M²⁺ transport studies. The complexformation of N,N-bis[o-(diphenylphosphino)benzylidene]ethylenediamine (P₂N₂) with silver,[Ag(P₂N₂)] (NO₃), (1) is reported. Complex 1 has been characterized by X-ray crystallography. 1 ismonoclinic, space group P2_1/n (No. 14), with cell dimensionsa = 13.398(4) , b=12.577(5) , c = 21.521(4) , =100.14(2) , V = 3570(2) ³ and Z = 4.     

Swelling behavior of amphiphilic hydrogels of copolymers of the vinyl ether of ethylene glycol and vinyl isobutyl ether,and their interaction with cationic surfactant

Amphiphilic hydrogels of copolymers of the vinyl ether of ethylene glycol and vinyl isobutyl ether were synthesized by -radiation-induced free radical polymerization. Hydrogels with certain copolymer compositions showed thermo-sensitive behavior in aqueous solutions. The swelling behavior of the hydrogels in cetylpyridinium bromide aqueous solution was studied. Increased swelling of the hydrogels was observed in the surfactant solutions. The increased swelling was more prominent for the hydrogels with a higher content of hydrophobic moiety in the copolymer composition, and with higher surfactant concentration. The reason for this phenomenon is discussed. Treatment of some hydrogels in the surfactant solutions resulted in higher swelling ability in distilled water with distinct thermo-induced contraction over a narrow temperature interval.     

A series of tetrahomodioxacalix[4]biscrown-n. Syntheses, crystal structures, and metal binding abilities

A series of novel tetrahomodioxacalix[4]biscrowns with crown-2, crown-3, crown-4, crown-5, and crown-6 units were synthesized. Conformations of each product are dependent on the base used and their conformation stabilities. All conformations were proven by NMR spectra and/or X-ray crystal structures. The 1,3-alternate homodioxacalix[4]biscrown-4 (4b) shows the best selectivity for K+, whereas the 1,3-alternate homodioxacalix[4]crown-5 (5) does for Cs+. Those selectivities are attributable to electrostatic interaction between the metal ion and the crown ring, as well as a pi-metal complexation. However, the C-1,2-alternate conformation does not take the metal ions regardless of the crown species as a result of steric hindrance from the methylene bridge of an ArCH2Ar unit.     

Dual-purpose sample trap for on-line strong cation-exchange chromatography/reversed-phase liquid chromatography/tandem mass spectrometry for shotgun proteomics. Application to the human Jurkat T-cell proteome

A dual-purpose sample-trapping column is introduced for the capacity enhancement of proteome analysis in on-line two-dimensional nanoflow liquid chromatography (strong cation-exchange chromatography followed by reversed-phase liquid chromatography) and tandem mass spectrometry. A home-made dual trap is prepared by sequentially packing C18 reversed-phase (RP) particles and SCX resin in a silica capillary tubing (1.5 cm x 200 microm I.D. for SCX, 0.7 cm x 200 microm for RP) ended with a home-made frit and is connected to a nanoflow column having a pulled tip treated with an end frit. Without having a separate fraction collection and concentration process, digested peptide mixtures were loaded directly in the SCX part of the dual trap, and the SCX separation of peptides was performed with a salt step elution initiated by injecting only 8 microL of NH4HCO3 solution from the autosampler to the dual trap. The fractionated peptides at each salt step were directly transferred to the RP trap packed right next to the SCX part for desalting, and a nanoflow LC-MS-MS run was followed. During the sample loading-SCX fractionation-desalting, flow direction was set to bypass the analytical column to prevent contamination. The entire 2D-LC separation and MS-MS analysis were automated. Evaluation of the technique was made with an injection of 15 microg peptide mixtures from human Jurkat T-cell proteome, and the total seven salt step cycles followed by each RPLC run resulted in an identification of 681 proteins.