Fabrication and sensing property for conducting polymer nanowire-based biosensor for detection of immunoglobulin G

Conducting polymers are excellent sensing materials in the design of bioanalytical sensors because of their electronic conductivity, low energy optical transitions, biocompatibility, and room temperature operation. Among them, Polypyrrole (Ppy) is one of the most extensively used conducting polymers because of a number of properties such as redox activity, rapid electron transfer, and ability to link a variety of biomolecules to pyrrole groups by chemical treatment. In this study, Ppy nanowires were synthesized by an electrospinning method. The nanowires were prepared from a solution mixture of Ppy and poly(ethylene oxide). The method of detection in such a device is based on the selective binding of antigen onto an antibody that is covalently attached to the nanowires. Thus, anti-IgG was immobilized on Ppy nanowires using an EDC {[N-(3-dimethyl aminopropyl)-N₂-ethylcarbodiimide hydrochloride]}-NHS(N-hydrosuccinimide) modified technique. Fluorescence images of BSA–FITC (fluorescein isothiocyanate labeling of bovine serum albumin) conjugation demonstrated that antibody was functionalized on the Ppy nanowires without non-specific binding and facilitated selective detection of antigen. Current–voltage (I–V) characterization was used to monitor the change in the conductivity of nanowires while the specific binding interaction occurred. These results of electrical properties enable Ppy nanowire-based biosensors to detect biomolecules in real-time.     

An efficient synthetic approach towards a single diastereomer of (2R,3R)-N2,N3-bis((S)-1-phenylethyl)butane-2,3-diamine via metalation and demetalation

Transition Metal Chemistry - A facile synthetic approach has been adopted towards the synthesis of (2R,3R)-N2,N3-bis((S)-1-phenylethyl)butane-2,3-diamine via demetalation of its dichloro Zn(II)...     

Vibro-impact analysis of two adjacent cantilever beams

Nonlinear Dynamics - This study analyzes the vibro-impact behavior of two adjacent cantilever beams subjected to vibration generated by applying harmonic excitation to their rigid base. For the...     

Thermal Hysteresis Accompanying Incommensurate-Commensurate Phase Transition in Mixed Crystals (K1-xCsx)2ZnCl4

The mixed crystal (K_1-xCs_x)₂ZnCl₄ with x = 0, 0.001, 0.01, 0.1, and 0.2 with optical quality has been grown by the Czochralski method. Using the Atomic Absorption Spectroscopy (AAS) and Energy Dispersive Spectroscopy (EDS), we determined the amount of Cs ion included in the mixed crystal. By using of DTA and DSC, we observed the change of T_c and T_i. The thermal hysteresis in the dielectric constants show strong dependence on the thermal process and on the amount of impurity which are explained by the influence of the thermal process and impurity, respectively on the creation, annihilation, and growth of discommensuration (DC).     

Synthesis and size control of monodisperse copper nanoparticles by polyol method

We describe herein the synthesis of metallic copper nanoparticles in the presence of poly(vinylpyrrolidone), employed as a protecting agent, via a polyol method in ambient atmosphere. The obtained copper particles were confirmed by XRD to be crystalline copper with a face-centered cubic (fcc) structure. We observed monodisperse spherical copper nanoparticles with a diameter range 45+/-8 nm. The particle size and its distribution are controlled by varying the synthesis parameters such as the reducing agent concentration, reaction temperature, and precursor injection rate. The precursor injection rate plays an important role in controlling the size of the copper nanoparticles. On the basis of XPS and HRTEM results, we demonstrate that the surface of the copper is surrounded by amorphous CuO and that poly(vinylpyrrolidone) is chemisorbed on the copper surface.     

Cu2O/CuO Electrocatalyst for Electrochemical Reduction of Carbon Dioxide to Methanol

Herein, we report the controlled and direct fabrication of Cu₂O/CuO thin film on the conductive nickel foam using electrodeposition route for the electrochemical reduction of carbon dioxide (CO₂) to methanol. The electrocatalytic reduction was performed in CO₂ saturated aqueous solution consisting of KHCO₃, pyridine and HCl at room temperature. CO₂ reduction was carried out at a constant potential of −1.3 V for 120 min to study the electrochemical performance of the prepared electrocatalysts. Cu₂O/CuO shows better electrocatalytic activity with highest current density of 46 mA/cm². The prepared catalyst can be an efficient and selective electrode for the production of methanol.