无光滤波六倍频微波信号产生的系统设计

基于两个级联偏振调制器,提出了一种高频谱纯度、稳定的六倍频微波信号产生方法。该方法通过适当调整偏振片的偏振方向、射频驱动信号电压和相位,实现无光滤波器条件下、任何波段六倍频微波信号的产生。利用Optisystem平台搭建的仿真系统,以S波段4 GHz信号为例,验证了该设计系统产生的六倍频信号质量,并分析了非理想射频驱动电压和相位对六倍频信号质量的影响,结果表明：该设计系统能产生最大光边带抑制比、射频无杂散抑制比分别为21.3,15.2 dB的六倍频微波信号;且非理想驱动电压和相位差的偏离应控制在理想值5%的范围之内。     

基于MEMS加速度计的倒置开关

运用MEMS加速度计MMA8453Q和单片机MSP430设计了一种针对放入式电子测压器的倒置开关。利用加速度计方向检测功能,单片机通过I2C接口读取加速度,判断是否倒置。倒置开关经步进电机多次旋转倒置测试成功率达到100%,并利用霍普金森杆进行了抗过载测试。结果表明,在受到45000g 冲击后仍能正常工作,能满足火炮等高冲击场合的测试要求。     

Mulberry Ethanol Extract and Rutin Protect Alcohol-Damaged GES-1 Cells by Inhibiting the MAPK Pathway

Mulberry extract has been proven to have the effect of resisting alcohol damage, but its mechanism is still unclear. In this study, the composition of mulberry ethanol extract (MBE) was identified by LC-MS/MS and the main components of MBE were ascertained by measuring. Gastric mucosal epithelial (GES-1) cells were used to elucidate the mechanism of MBE and rutin (the central part of MBE) helped protect against alcohol damage. The results revealed that phenolics accounted for the majority of MBE, accounting for 308.6 mg/g gallic acid equivalents and 108 substances were identified, including 37 flavonoids and 50 non-flavonoids. The treatment of 400 μg/mL MBE and 320 μM rutin reduced early cell apoptosis and the content of intracellular reactive oxygen species, malondialdehyde and increased glutathione. The qPCR results indicated that the MBE inhibits the expression of genes in the mitogen-activated protein kinase (MAPK) pathway, including p38, JNK, ERK and caspase-3; rutin inhibits the expression of p38 and caspase-3. Overall, MBE was able to reduce the oxidative stress of GES-1 cells and regulated apoptosis-related genes of the MAPK pathway. This study provides information for developing anti-ethanol injury drugs or functional foods.     

气相色谱矩形离子阱质谱联用仪的设计与性能

气相色谱离子阱质谱联用仪(GC-ITMS)广泛地应用于药物分析、环境分析、农药检测和食品分析、有机化学品分析、毒品分析以及医学和生物分析等领域。离子阱质谱作为色谱的检测器,决定了色质联用仪的分析性能,包括检出限、分辨率。离子阱质量分析器从传统的双曲型3D离子阱发展到2D线性离子阱,质量歧视效应得到了极大的改善,灵敏度得到了提高。矩形离子阱作为线性离子阱,结构简单,加工和装配容易,因此应用到GCMS系统中将具有非常大的优势。介绍了矩形离子阱质谱仪的设计方案、仪器整机的性能测试、质量分辨和质量歧视效应分析,与Agilent6890组成GCMS联用仪,对实际样品进行了分析。     

微流控芯片技术在蛋白质分析中的应用进展

近年来,微流控芯片技术取得了显著的发展。随着微电子及微机械等制作技术的不断进步,高通量、高效、快速、低成本的微流控分析芯片在蛋白质和多肽分析方面获得了令人瞩目的成果。本文主要介绍了微流控芯片在蛋白质组学分析研究的应用和发展。引用文献52篇。     

DETERMINATION OF INTERFACIAL MECHANICAL PARAMETERS FOR AN Al/EPOXY/Al2O3 SYSTEM BY USING PEEL TEST SIMULATIONS

Peel test measurements and simulations of the interfacial mechanical parameters for the Al/Epoxy/Al2O3 system are performed in the present investigation. A series of Al film thicknesses between 20 and 250 microns and three peel angles of 90, 135 and 180 degrees are considered. Two types of epoxy adhesives are adopted to obtain both strong and weak interface adhesions. A finite element model with cohesive zone elements is used to identify the interfacial parameters and simulate the peel test process. By simulating and recording normal stress near the crack tip, the separation strength is obtained, Furthermore, the cohesive energy is identified by comparing the simulated steady-state peel force and the experimental result. It is found from the research that both the cohesive energy and the separation strength can be taken as the intrinsic interfacial parameters which are dependent on the thickness of the adhesive layer and independent of the film thickness and peel angle.     

Access to pyridines via cascade nucleophilic addition reaction of 1,2,3-triazines with activated ketones or acetonitriles

We studied the cascade nucleophilic addition reactions of 1,2,3-triazines with activated acetonitriles or ketones,which were used to construct highly substituted pyridines that are not easily accessed by conventional methods.The strategy addressed some structural diversity issues currently facing medicinal chemistry,and the resulting pyridines could be used as convenient precursors for the synthesis of related pharmaceuticals.In particular,our method was applied to the syntheses of the marketed drug etoricoxib and several biologically important molecules in a few steps.     

PdNi/Ni Nanotubes Assembled by Mesoporous Nanoparticles for Efficient Alkaline Ethanol Oxidation Reaction

The optimization of structure and composition is essential to improve the performance of catalysts. Herein, mesoporous nanoparticles assembled PdNi/Ni nanotubes (mPdNi/Ni NTs) are successfully fabricated using nickel nanowires as sacrificial template. The combination of nanotubular structure with mesoporous nanoparticle morphology can provide facilitated transfer channels and sufficient active sites, allowing the full contact and reaction between catalysts and reactants. Therefore, the synthesized mPdNi/Ni NTs exhibite superior ethanol oxidation performance to mesoporous Pd nanotubes and commercial Pd black. This study proposes a rational strategy for the development of nanoparticle assembled nanotubes with surface mesoporous morphology, which can greatly improve catalytic performance in various electrocatalytic fields.     

Rate sensitivity and deformation mechanism of semi-crystalline polymers during instrumented indentation

Instrumented indentation tests using both constant loading rate (CLR) and continuous stiffness measurement (CSM) operation modes were performed to investigate the deformation mechanism and their sensitivity to the deformation rate in semi-crystalline polymers through the quantitative analysis of load-depth loading and unloading curves. The strain rate was constant during the CSM tests, while the strain rate decreased with the increasing of loading time in CLR tests. The mechanical response mechanism of the semi-crystalline polymers to these tests was very complicated because of the combined effects of strain-hardening in the crystal phase and strain-softening in the amorphous phase. Results show that the loading index m reflects the strain-hardening or strain-softening response during indentation. When m > 2, the mechanical response was due to the strain-hardening, and when m < 2, the response was due to strain-softening. A method based on the measured contact hardness was proposed to obtain the unloading stiffness, and the other mechanical parameters could then be determined according to the unloading stiffness.