Hollow Polydimethylsiloxane Beads with a Porous Structure for Cell Encapsulation

Based on a water‐in‐oil‐in‐water emulsion system, porous and hollow polydimethylsiloxane (PDMS) beads containing cells using a simple fluidic device with three flow channels are fabricated. Poly(ethylene glycol) (PEG) in the PDMS oil phase is served as a porogen for pore development. The feasibility of the porous PDMS beads prepared with different PEG concentrations (10, 20, and 30 wt%) for cell encapsulation in terms of pore size, protein diffusion, and cell proliferation inside the PDMS beads is evaluated. The PDMS beads prepared with PEG 30 wt% are exhibited a highly porous structure and facilitated fast diffusion of protein from the core domain to the outer phase, eventually leading to enhanced cell proliferation. The results clearly indicate that hollow PDMS beads with a porous structure could provide a favorable microenvironment for cell survival due to the large porous structure.

     

Quantitative LC–MS/MS method in urine for the detection of drugs used to reverse the effects of chemical castration

The chemical castration law, which targets child molesters with recidivism, was introduced in Korea in 2011. For this, leuprolide, a gonadotropin-releasing hormone agonist, is used to decrease testosterone production and suppress libido. In order to achieve efficient law enforcement, it is necessary to monitor intentional ingestion of drugs that antagonize the effect of leuprolide. Therefore, an analytical method for the simultaneous detection of mirodenafil, sildenafil, tadalafil, udenafil, vardenafil, icariin, alprostadil, and yohimbine, which are the major impotence treatment drugs, legitimately or otherwise, in Korea, as well as their selected metabolites, in human urine was established and validated using liquid chromatography–tandem mass spectrometry (LC–MS/MS). First, different sample preparation methods, two solid-phase extractions with different cartridges and protein precipitation, were compared and protein precipitation was chosen for the entire study because it showed better matrix effects and recoveries. Thus, the drugs and metabolites in urine were extracted by protein precipitation and then filtered and analyzed by LC–MS/MS with polarity switching electrospray ionization. The validation results of selectivity, matrix effect, recovery, linearity, intra- and inter-assay precision and accuracy were satisfactory. The limits of detection ranged from 0.25 to 10 ng/mL, and the limits of quantification were 2.5 to 50 ng/mL. The drugs and metabolites in urine did not show any degradation under storage for 7 and 15 days at 4 and ?20 °C as well as after three freeze–thaw cycles. The developed method will be very useful for monitoring the illegal use of impotence treatment drugs.     

Preparation and characterization of cotton fabrics with antibacterial properties treated by crosslinkable benzophenone derivative in choline chloride-based deep eutectic solvents

Cotton fabrics with antibacterial properties were prepared by the treatment with 3,3′4,4′-benzophenone tetracarboxylic dianhydride (BPTCD) in a combined process of shaking immersion in dyeing machine and pad-dry-cure. Environmentally-benign choline chloride (ChCl)-based deep eutectic solvents (DESs) were mainly examined as treatment media instead of using organic solvent. The results revealed that cotton fabrics treated with BPTCD in urea-ChCl DES showed a strong ester carbonyl peak in fourier transform infrared (FTIR) analysis, indicating fixation of BPTCD on cotton cellulose. Detailed characterizations of the BPTCD-treated cotton were carried out by FTIR, thermogravimetric analysis, scanning electron microscopy, dye staining, and evaluation of hydrophilicity and strength. The treated fabrics demonstrated a high level of antibacterial characteristics before and after UV irradiation. This indicated that addition of ChCl could enhance antibacterial activity of cotton before UV irradiation. Therefore, use of ChCl-based DES along with BPTCD incorporation provided environmentally-acceptable and economically-feasible treatment process for preparation of novel antibacterial cotton.     

Distillation of LiCl from the LiCl–Li2O molten salt of the electrolytic reduction process

Electrolytic reduction of the uranium oxide in LiCl–Li₂O molten salt for the treatment of spent nuclear fuel requires the separation of the residual salt from the reduced metal product, which contains about 20 wt% salt. In order to separate the residual salt and reuse it in the electrolytic reduction, a vacuum distillation process was developed. Lab-scale distillation equipment was designed and installed in an argon atmosphere glove box. The equipment consisted of an evaporator in which the reduced metal product was contained and exposed to a high temperature and reduced pressure; a receiver; and a vertically oriented condenser that operated at a temperature below the melting point of lithium chloride. We performed experiments with LiCl–Li₂O salt to evaluate the evaporation rate of LiCl salt and varied the operating temperature to discern its effect on the behavior of salt evaporation. Complete removal of the LiCl salt from the evaporator was accomplished by reducing the internal pressure to <100 mTorr and heating to 900 °C. We achieved evaporation efficiency as high as 100 %.     

Effect of Dissolved Oxygen Tension and Agitation Rates on Sulfur-Utilizing Autotrophic Denitrification: Batch Tests

The effect of dissolved oxygen (DO) and agitation rate in open and closed reactors was examined for sulfur-utilizing autotrophic denitrification. The reaction rate constants were determined based on a half-order kinetic model. Declining denitrification rate constants obtained for open reactors those of 8.46, 8.03, and 2.18 for 50 mg NO₃ ^?-N/L, while 11.12, 9.14, and 0.12 mg^1/2/L^1/2?h were for 100 mg NO₃ ^?-N/L at agitation speeds of 0, 100, and 200 rpm. In closed reactors, the ever-increasing denitrification rates were 10.13, 22.56, and 37.03, whereas for the same nitrate concentrations and speeds the rates were 13.17, 15.63, and 26.67 mg^1/2/L^1/2?h. The rate constants correlated well (r ² ?=?0.89–0.99) with a half-order kinetic model. In open reactors, high SO₄ ^2?/N ratios (8.02–75.10) while in closed reactors comparatively low SO₄ ^2?/N ratios (6.10–13.39) were obtained. Sulfur oxidation occurred continuously in the presence of DO, resulting in mixed cultures acclimated to sulfur and nitrate. SO₄ ^2? was produced as an end product, which reduced alkalinity and lowered pH over time. Furthermore, DO inhibited sulfur denitrification in open reactors, while agitation in closed reactors increased the rate of denitrification.     

Recent Advances in Aerosol‐Assisted Spray Processes for the Design and Fabrication of Nanostructured Metal Chalcogenides for Sodium‐Ion Batteries

Increasing demand for sodium‐ion batteries (SIBs), one of the most feasible alternatives to lithium ion batteries (LIBs), has resulted because of their high energy density, low cost, and excellent cycling stability. Consequently, the design and fabrication of suitable electrode materials that govern the overall performance of SIBs are important. Aerosol‐assisted spray processes have gained recent prominence as feasible, scalable, and cost‐effective methods for preparing electrode materials. Herein, recent advances in aerosol‐assisted spray processes for the fabrication of nanostructured metal chalcogenides (e.g., metal sulfides, selenides, and tellurides) for SIBs, with a focus on improving the electrochemical performance of metal chalcogenides, are summarized. Finally, the improvements, limitations, and direction of future research into aerosol‐assisted spray processes for the fabrication of various electrode materials are presented.     

Influence of elastomeric core–shell impact modifiers on mechanical properties of cellulose diacetate resin

Cellulose diacetate (CDA) plasticized with triacetine was blended by melting extrusion with two different kind of elastomeric core–shell impact modifiers: methyl methacrylate (MMA, shell) grafted onto styrene–butadiene–rubber (SBR, core) (MSBR) and MMA (shell) grafted onto butyl acrylate rubber (BAR, core) (MBAR). The different CDA/MSBR and CDA/MBAR blends were characterized by mechanical properties and morphological observation with various impact modifier contents. The highest impact strength was observed in the case of the blend with 5 wt% of MSBR and 3 wt% of MBAR, respectively. The tensile strength and Young’s modulus of CDA blends were decreased with increasing both MSBR and MBAR. According to SEM observation, MBAR was dispersed more effectively in CDA matrix than that of MSBR, thus indicating improved impact strength.