Fabrication of polycrystalline silicon films by Al‐induced crystallization of silicon‐rich oxide films

Polycrystalline silicon (poly‐Si) films were fabricated by aluminum (Al)‐induced crystallization of Si‐rich oxide (SiO_x) films. The fabrication was achieved by thermal annealing of SiO_x /Al bilayers below the eutectic temperature of the Al–Si alloy. The poly‐Si film resulting from SiO_1.45 exhibited good crystallinity with highly preferential (111) orientation, as deduced from Raman scattering, X‐ray diffraction, and transmission electron microscopy measurements. The poly‐Si film is probably formed by the Al‐induced layer exchange mechanism, which is mediated by Al oxide.     

Homogeneous alignment of liquid crystals on low-temperature solution-derived gallium oxide films via IB irradiation method

In this paper, solution-derived gallium oxide (GaO) films are fabricated for the homogeneous alignment of liquid crystals (LCs) after an ion-beam (IB) irradiation process. GaO thin films are prepared under a variety of temperatures and different IB irradiation intensities, and the physicochemical performances of the fabricated GaO thin films are analysed using a UV-vis spectrometer, an atomic force microscope, and X-ray photoelectron spectroscopy. A higher transmittance of 85.40% from GaO thin film is obtained compared with that of polyimide (PI) film (83.52%), which indicates the feasibility for a GaO thin layer to substitute for a conventional PI layer as an alignment layer. LCs are found to align on the GaO thin film after pre-baking at 100°C and homogeneous and uniform low-IB intensity irradiation. We also determined the electro-optical (EO) characteristics of the twisted nematic (TN) cells fabricated with GaO thin layers and found them to be similar to those of cells fabricated with PI layers. Overall, GaO films achieved via the IB irradiation method are promising LC alignment layers due to the method’s low-temperature solution-derived process.     

A Titanium‐Doped SiOx Passivation Layer for Greatly Enhanced Performance of a Hematite‐Based Photoelectrochemical System

This study introduces an in situ fabrication of nanoporous hematite with a Ti‐doped SiO_x passivation layer for a high‐performance water‐splitting system. The nanoporous hematite with a Ti‐doped SiO_x layer (Ti‐(SiO_x/np‐Fe₂O₃)) has a photocurrent density of 2.44 mA cm^?2 at 1.23 V_RHE and 3.70 mA cm^?2 at 1.50 V_RHE. When a cobalt phosphate co‐catalyst was applied to Ti‐(SiO_x/np‐Fe₂O₃), the photocurrent density reached 3.19 mA cm^?2 at 1.23 V_RHE with stability, which shows great potential of the use of the Ti‐doped SiO_x layer with a synergistic effect of decreased charge recombination, the increased number of active sites, and the reduced hole‐diffusion pathway from the hematite to the electrolyte.     

Reducible Dimeric Conjugates of Small Internally Segment Interfering RNA for Efficient Gene Silencing

The condensation of nucleic acids into compact nanoparticles with cationic carriers is a powerful tool for translocating exogenous nucleic acids into cells. To date, most efforts have been focused on the development of novel gene carriers for safe and efficient gene delivery. However, small interfering RNA (siRNA) is generally not strongly associated with cationic carriers due to its stiff structure and low spatial charge density. To overcome this limitation, this work introduces a well‐defined dimeric conjugate of small internally segment interfering RNA (sisiRNA) linked via a disulfide bond for enhanced cellular uptake and gene silencing. Dimeric sisiRNA is synthesized through oxidizing two monomeric sisiRNA molecules, each of which consists of a sense strand carrying a nick and an antisense strand modified with a thiol group at the 3′‐end. The nick in the sense strand enables the dimeric sisiRNA to be more effectively condensed into nanosized complexes due to the increased structural flexibility, which results in a higher gene silencing efficiency compared with the dimeric siRNA containing the intact sense strands. The results indicate that the discontinuity of the sense strands is a simple method of adding more flexibility to various siRNA‐based nanostructures for enhanced gene silencing.

     

Effective esterification of carboxylic acids using (6-oxo-6H-pyridazin-1-yl)phosphoric acid diethyl ester as novel coupling agents

(6-Oxo-6H-pyridazin-1-yl)phosphoric acid diethyl esters (3) are efficient and selective coupling agents for equimolar esterification of carboxylic acids and alcohols. Esterification of aliphatic and aromatic carboxylic acids with aliphatic and aromatic alcohols using 3 afforded the corresponding esters chemoselectively in good to excellent yield.     

Vaporization-condensation-recrystallization process-mediated synthesis of helical m-aminobenzoic acid nanobelts

One-dimensional (1D) helical organic nanostructures were synthesized by a modified vapor-solid (VS) process, called the vaporization-condensation-recrystallization (VCR) process. The conventional solution-phase synthetic methods generally mediate self-assemblies of repeating unit molecules. To provide enough intermolecular interaction forces among the unit molecules, such strategy requires specific designs and syntheses of complex unit molecules as they possess numerous functional groups including phenyl rings, hydroxyl groups, long aliphatic chains, etc. On the contrary, we found that small and simple organic molecules, for example, m-ABA, could be self-assembled by the VCR process, resulting in 1D helical organic nanostructures. When m-aminobenzoic acid (m-ABA) powders were vaporized and transported to be condensed on a cooler region, the condensates were recrystallized into 1D helical nanobelts. Each step of the VCR process was confirmed from control experiments performed by varying reaction times, substrate types, and reaction temperatures. Powder XRD data, SAED analysis, and theoretical calculations revealed that dimers of m-ABA molecules have repeating units, and the growth axis of m-ABA nanohelices is [100].     

Novel synthetic strategy for developing an isospecific unbridged metallocene system for propylene polymerization

New unbridged zirconocenes functionalized with a Lewis base, [{1-(E-C(6)H(4))-3,4-Me(2)C(5)H(2)}(2)ZrCl(2)] (E = p-NMe(2) (3); p-OMe (4); p-SMe (5)) were prepared and their propylene polymerization behavior was examined. Under methylaluminoxane (MAO) activation at atmospheric monomer pressure, these complexes afford mixtures of polymers exhibiting multimelting transition temperatures and broad molecular weight distribution, whereas they produce completely atactic polypropylenes under [Ph(3)C][B(C(6)F(5))(4)] activation. Stepwise solvent extraction of the polymer mixtures reveals that the polymers consist of amorphous, moderately isotactic, as well as, highly isotactic portions and the weight ratio of each portion is dependent upon reaction temperature. The generation of rigid rac-like cationic active species in situ by the interaction between basic sites of catalysts and acidic sites of the [Me-MAO](-) counter anion is considered to be the origin of the observed isospecificity. Further investigation of bulk polymerization in liquid propylene shows not only a considerable increase of the isotactic portion of the obtained polypropylenes but also apparent isospecificity of 4 and 5/MAO systems even at high temperature. Variation of the Lewis basic center leads to a dramatic change in stereoselectivity of the catalyst in the decreasing order of 3>4>5, in spite of their structural similarity.     

Simultaneous determination of first-line anti-tuberculosis drugs and their major metabolic ratios by liquid chromatography/tandem mass spectrometry

Monitoring of anti-tuberculosis drug concentrations and dose adjustment can be helpful in cases that show poor response to treatment. Here, we describe a method that can rapidly and simultaneously measure the blood concentrations of four anti-tuberculosis drugs (isoniazid, rifampicin, pyrazinamide, and ethambutol) and two major metabolic ratios (acetylisoniazid/isoniazid and 25-desacetylrifampicin/rifampicin) using high-performance liquid chromatography/tandem mass spectrometry (HPLC/MS/MS). A C18 reversed-phase column and gradients of methanol in 0.3% formic acid and water were used for HPLC separation. The drug concentrations were determined by multiple reaction monitoring in positive ion mode and the assay performance was evaluated. We determined peak concentration ranges for each drug and acetylisoniazid/isoniazid and 25-desacetylrifampicin/rifampicin ratios by analyzing 2-h post-dose samples in patients treated with standard dosing as a first-line treatment. The preparation of 20 samples including two steps of deproteinization with 50% and 100% methanol was performed within 20 min and chromatographic separation was achieved within 4 min/sample. Interassay calibration variability data obtained over concentrations of 0-8 microg/mL for isoniazid and ethambutol and 0-80 microg/mL for rifampicin and pyrazinamide showed a linear and reproducible curve. Within-run and between-run imprecision (CVs) were 1.9-5.5% and 3.5-10.5% and the lower limits of detection and quantification were 0.01-0.5 microg/mL and 0.05-1.0 microg/mL, respectively. The isoniazid concentration was found to be inversely correlated to the acetylisoniazid/isoniazid ratio (R=-0.739, P<0.001). The devised method allows for the simple, rapid, sensitive and reproducible quantification of isoniazid, rifampicin, pyrazinamide, ethambutol and their two metabolic ratios and should be helpful for therapeutic drug monitoring in tuberculosis patients.