Strong visible PL from the nc-Si thin film by Ni silicide mediated crystallization

We studied the growth of nanocrystalline silicon (nc-Si) thin film exhibiting a strong room temperature photoluminescence (PL) at 1.81–2.003 eV. The amorphous silicon was crystallized by Ni silicide mediated crystallization (Ni SMC) and then Secco-etched to exhibit the PL. The PL peak energy and intensity increase with increasing the metal density on the a-Si because of the reduction in the grain size down to 2 nm. The photoluminescence energy and peak intensity depend strongly on the Secco etch time because the grain size is reduced by etching the grain boundaries.     

A spring-embedding approach for the facility layout problem

The facility layout problem is concerned with finding the most efficient arrangement of a given number of departments with unequal area requirements within a facility. The facility layout problem is a hard problem, and therefore, exact solution methods are only feasible for small or greatly restricted problems. In this paper, we propose a spring-embedding approach that unlike previous approaches results in a model that is convex. Numerical results demonstrating the potential of our model and the efficiency of our solution procedure are presented.     

Experimental Evaluation of Strain Shielding in Distal Femur in Revision TKA

Theoretical concerns about the use of cemented and press-fit stems in revision total knee arthroplasty (TKA) include stress shielding with adverse effects on prosthesis fixation. Radiological studies have showed distal femoral bone resorption after revision TKA. The revision with use of stems can place abnormal stresses. These stresses can promote the effect of bone stress shielding and may contribute to bone loss. Experimental quantification of strain shielding in the distal synthetic femur following TKA is the main purpose of the present study. Three different constructs of TKA were assessed. The first construct included a stemless femoral component. The other two included a press-fit and a cemented femoral stem. Cortical bone strains were measured experimentally with tri-axial strain gauges in synthetic femurs before and after in-vitro knee surgery. The difference between principal strains of implanted and intact femur was calculated for each strain gauge position. This study indicates that the use of stems in distal femur changes the distribution and magnitude of bone strains. The press-fit stem provoked relevant bone area (stem length) subjected to strain shielding and also originated the highest reduction of strains in the distal region, which can potentially induce bone resorption. The stemless implanted femur produced minor bone strain changes relatively to the intact femur. The use of distal femur stems increases initial stability in the bone, but the observed reduction of strains in this region, relative to the intact femur, provokes strain shielding that can induce bone resorption and may compromise the long term implant stability.     

In situ transmission electron microscopy study of the nucleation and grain growth of Ge2Sb2Te5 thin films

The nucleation and grain growth of the Ge₂Sb₂Te₅ (GST) thin films were studied using high voltage electron microscope operated at 1250 kV. As a result, we have found that 2 nm-sized nucleus forms as a cluster which atoms are arranged regularly at the stage of nucleation prior to the formation of grains having crystal structure. The high-resolution transmission electron microscopy study and fast-Fourier transformations revealed that coexistence of face-centered-cubic (FCC) and hexagonal structure occurs, and formation of twin defect is found in the hexagonal structure during the grain growth as the annealing temperature is increased. GST grain having the hexagonal structure grow from the surface, and the growth proceeded perpendicular to the [0 0 0 1], namely the path parallel to the (0 0 0 1) plane. Consequently, grain growth to a large-scale result in a lengthened shape.     

Vapor-particle partitioning of hydrocarbons in Western Mediterranean urban and marine atmospheres

An analytical procedure is described for a comprehensive determination of the composition of hydrocarbons in the atmosphere, based on: (a) aerosol filtration and subsequent adsorption of the vapor phase onto active charcoal and polyurethane foam; (b) GPC and HPLC fractionation of the extracts, and (c) analysis of the fractions by GC-MS under EI and NICI modes. Special emphasis is placed onn-alkanes, PAHs and their oxygenated derivatives.The characterization of samples collected in a coastal urban area (Barcelona city), and far away over the Western Mediterranean, at sea level and at 1100 m of altitude, revealed significant changes in the aerosol composition, mainly attributed to initial vapor-particle partitioning processes, influenced by ambient temperature variations, and to others taking place during long-range atmospheric transport, related with the different compound photoreactivities and with an unexplained source-decoupling phenomenon.     

Polyarylate–polystyrene block copolymer from macro-azoinitiator: Synthesis and its thermal properties

A macro-azoinitiator containing polyarylate segment and azo group was prepared by the solution polycondensation of azobiscyanopentanoyl chloride and hydroxy-terminated polyarylates having viscosity-average molecular weights of 6200, 8100, and 12 400. These macro-azoinitiators were used in the radical polymerization of styrene to synthesize polyarylate-polystyrene block copolymers. Thermal properties measured by the differential scanning calorimetry indicated the phase separated morphology of the block copolymers except at low molecular weight of the block constituents. © 1993 John Wiley & Sons, Inc.     

Reaction of phosgene with the tricycle related to the minor base of phenylalanine transfer ribonucleic acids

1-Benzylwye (8) underwent electrophilic substitution at the 7-position in the presence of phosgene and pyridine in tetrahydrofuran (THF) to afford the 1,4-dihydropyridines (11, 10, and 14) together with the carboxylic acid 6 and its methyl ester 2 after short treatment of the reaction mixture with methanol and then with water. When triethylamine was used instead of pyridine, phosgene reacted with triethylamine rather than 8, producing (E)-3-(diethylamino)propenoyl chloride (17) and diethylcarbamoyl chloride (18).     

Selective binding of the cyano group in acrylonitrile adsorption on Si(100)-2 x 1

The covalent binding of acrylonitrile (CH(2)=CH-C triple bond N) and the formation of a C=C-C=N structure on Si(100) have been investigated using high-resolution electron energy loss spectroscopy (HREELS), X-ray photoelectron spectroscopy (XPS), ultraviolet photoelectron spectroscopy (UPS), and density functional theory (DFT) calculations. For chemisorbed acrylonitrile, the absence of nu(C triple bond N) at 2245 cm(-1) and the appearance of nu(C=N) at 1669 cm(-1) demonstrate that the cyano group directly participates in the interaction with Si(100), which is further supported by XPS and UPS observations. Our experimental results and DFT calculations unambiguously demonstrate a [2 + 2] cycloaddition mechanism for acrylonitrile chemisorption on Si(100) through the binding of C triple bond N to Si dimers. The resulting chemisorbed monolayer with a C=C-C=N skeleton can serve as a precursor for further chemical syntheses of multilayer organic thin films in a vacuum and surface functionalization for in situ device fabrication.